Jump to content
Sign in to follow this  
africandrifter

problems with my pelco kbd 300a

Recommended Posts

High kids.

 

So I'm having an issue with my KDB300a controller. I'm connected to a pelco esprite. It was working fine till some toolbag decided to randomly push buttons on the controller. Sometimes it seems that the camera has gone into some kind of preset pattern and just turns in circles. If I move the joystick in the opposite direction to what the camera is moving its only seems to slow the spin. I've tried 95 PRESET (hold preset for a few seconds to try and clear the preset but no luck. Ive also had a volt meter on the data lines to the camera and can confirm the required 4.5v DC is present and as is expected from a functional unit, it drops to about 1.5v DC when a control signal is sent.

 

 

Anyone out there have any advice?

 

G.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×