Jump to content
Sign in to follow this  
SteveK

Changing ID for PZT

Recommended Posts

I have PTZ cameras along with five of stationary on the same DVR. No problems with controlling the first. I assume that this has to do with the defualt address is 001. The 2nd, however, I cannot change the address for.

Camera: PTX-LX700 12x

DVR: Generic Chinese

 

The 2nd cam is on channel 2. From the DVR I changed the address to 2. Yet when I power cycle The initial info shows that it is still oo1. I tried to goto "Iris Open" and "Preset 95" but the menu does not come up. IS have checked the wiring but the seems to be no communication with the camera.

 

Any Ideas would be appreciated

Share this post


Link to post
Share on other sites

The fact that you change the ID on the DVR does not change it on the camera. You need to change the ID on the camera first; and then configure your DVR to send the commands to the ID you are using.

 

The menu won't come up if you are sending the commands to ID 2, but you have not first changed the camera's ID from 1 to 2.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×