Jump to content
davahad

Adding Audio Mic to QCN8035Z PTZ Camera

Recommended Posts

Hi,

 

Trying to add a powered Q-SEE QSPMIC Microphone which has one Male RCA Jack Connector to the QCN8035Z.

 

There are 8 single wires with no connectors coming out of the 8035Z.

Red - Alarm COM

Brown - Alarm Out

White - Alarm In

Blue - Alarm In 2

Grey - Audio Out

Black - Ground

Green - Audio Ground

Purple - Audio In

 

Do I splice on a single Female RCA Jack to the Purple Wire (Audio In) and then plug the QSPMIC into this connection? What about Audio Ground? Do I need to use the Audio Ground Wire?

 

Also the 8035Z is a 24V POE+ camera. Do I need to be concerned about using the QSPMIC Microphone which has it's own 12V power supply? I do not want to fry the camera.

 

I am powering the 8035Z using a POE+ Switch (not using the power brick that came with the 8035Z).

 

Appreciate any help.

 

David

Share this post


Link to post
Share on other sites

I answered this one myself and added pictures and the connectors used.

 

With this camera and NVR setup you have to use a Microphone that is powered with 12V. The Q-SEE QSPMIC Microphone is powered with its' own 12V power supply. Overall the sound is pretty good with this mic.

1107161829_HDR_resized.thumb.jpg.e902c08d816889b98650dea235d9548d.jpg

1107161843a_HDR_resized.thumb.jpg.7e68713e40de53f42f915f2de71e17f9.jpg

1108161055_resized.thumb.jpg.0751d2a0f2ff6868087557c326963f09.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×