Server/Site upgrade December 14th - 16th



View unanswered posts | View active topics


Reply to topic  [ 990 posts ]  Go to page Previous  1 ... 32, 33, 34, 35, 36, 37, 38 ... 66  Next
Author Message
  
 Post subject: Re: Dahua firmware
PostPosted: Wed May 14, 2014 3:09 pm 
Registered User

Joined: Mar 2006
Posts: 1745

Offline
I'm not familiar with that cam, and it's not in the 2/3 and 4/5 series we see a lot of posts on.

If you have a firmware file for it, try googling for variations of it. For instance, for the 4/5 series, I'd search on "General_IPC-HX5(4)XXX" to see what showed up. The quotes are important, or google will break it down into smaller phrases and find lots of irrelevant hits.


Top
 Profile  
Reply with quote  

  
 Post subject: Re: Dahua firmware
PostPosted: Thu May 15, 2014 2:49 am 
Registered User

Joined: Apr 2014
Posts: 9

Offline
Anyone know that if Can I Put a PAL fw on a hfw2100P with ntsc without bircking it? Thanks


Top
 Profile  
Reply with quote  

  
 Post subject: Re: Dahua firmware
PostPosted: Thu May 15, 2014 5:38 am 
Registered User

Joined: May 2014
Posts: 3

Offline
Can someone be so kind to share the link of the latest Eng firmware for HDW4100S + HFW4100S? PAL version please.


Top
 Profile  
Reply with quote  

  
 Post subject: Re: Dahua firmware
PostPosted: Thu May 15, 2014 6:01 am 
Registered User

Joined: May 2014
Posts: 3

Offline
[quote="MaxIcon"]The PAL version is here. It was tested and reported good a few posts back:
[url]ftp://ftp.wintel.fi/drivers/dahua/cam-fw/IPC-HX5(4)XXX/[/url]

The NTSC version is here. It's working on my cam:
[url]https://drive.google.com/file/d/0B5RXJz1sMJ9VLVdhbjB5SzdaMWM/edit?usp=sharing[/url][/quote]

Is this the one for HDW + HFW4100S PAL?


Top
 Profile  
Reply with quote  

  
 Post subject: Re: Dahua firmware
PostPosted: Thu May 15, 2014 12:40 pm 
Registered User

Joined: May 2014
Posts: 3

Offline
hi
tanx for your info.

i have a question. how can i find that my cam is a PAL version or NTSC?


Top
 Profile  
Reply with quote  

  
 Post subject: Re: Dahua firmware
PostPosted: Fri May 16, 2014 3:43 pm 
Registered User

Joined: Mar 2006
Posts: 1745

Offline
kokmeng wrote:
MaxIcon wrote:
The PAL version is here. It was tested and reported good a few posts back:
ftp://ftp.wintel.fi/drivers/dahua/cam-fw/IPC-HX5(4)XXX/

The NTSC version is here. It's working on my cam:
https://drive.google.com/file/d/0B5RXJz1sMJ9VLVdhbjB5SzdaMWM/edit?usp=sharing


Is this the one for HDW + HFW4100S PAL?


From the release notes in a previous post:

Support models
•HX5xxx series:HDB(W)5100、HDB(W)5200、HDB(W)5100-DI、IPC-HDB(W)5200-DI、HF5100、HF5200、HFW5100C、HFW5200C、、HFW5200-IRA、HFW5100-IRA、HFW5200D HFW5100D、
•HX4xxx series:HFW4100S、HFW4200S、HFW4300S、HDW4100S、HDW4200S、HDW4300S、HDB4100C、HDB4105C、HDB4200C、HDB4300C


One of the cam's configuration screens shows if it's PAL or NTSC; there's a dropdown that doesn't have any other choices. Why they do this is beyond me; most other manufacturers let you choose in the config.

ETA: It's on Setup/System/General/Video Standard.


Last edited by MaxIcon on Sat May 17, 2014 3:46 pm, edited 1 time in total.

Top
 Profile  
Reply with quote  

  
 Post subject: Re: Dahua firmware
PostPosted: Sat May 17, 2014 3:40 am 
Registered User

Joined: May 2014
Posts: 3

Offline
unfortunately i cant find any firmware for mydahua SD6C120S-HN. dose any one have any idea?


Top
 Profile  
Reply with quote  

  
 Post subject: Re: Dahua firmware
PostPosted: Sat May 17, 2014 3:50 pm 
Registered User

Joined: Mar 2006
Posts: 1745

Offline
Dahua's factory support is terrible. You have to either get it from the vendor you bought from, or find someone on the web that has it.


Top
 Profile  
Reply with quote  

  
 Post subject: Re: Dahua firmware
PostPosted: Sat May 17, 2014 8:49 pm 
Registered User

Joined: May 2014
Posts: 3

Offline
[quote="MaxIcon"][quote="kokmeng"][quote="MaxIcon"]The PAL version is here. It was tested and reported good a few posts back:
[url]ftp://ftp.wintel.fi/drivers/dahua/cam-fw/IPC-HX5(4)XXX/[/url]

The NTSC version is here. It's working on my cam:
[url]https://drive.google.com/file/d/0B5RXJz1sMJ9VLVdhbjB5SzdaMWM/edit?usp=sharing[/url][/quote]

Is this the one for HDW + HFW4100S PAL?[/quote]

From the release notes in a previous post:

Support models
•HX5xxx series:HDB(W)5100、HDB(W)5200、HDB(W)5100-DI、IPC-HDB(W)5200-DI、HF5100、HF5200、HFW5100C、HFW5200C、、HFW5200-IRA、HFW5100-IRA、HFW5200D HFW5100D、
•HX4xxx series:HFW4100S、HFW4200S、HFW4300S、HDW4100S、HDW4200S、HDW4300S、HDB4100C、HDB4105C、HDB4200C、HDB4300C


One of the cam's configuration screens shows if it's PAL or NTSC; there's a dropdown that doesn't have any other choices. Why they do this is beyond me; most other manufacturers let you choose in the config.

ETA: It's on Setup/System/General/Video Standard.[/quote]

Thanks for great help.


Top
 Profile  
Reply with quote  

  
 Post subject: Re: Dahua firmware
PostPosted: Sun May 18, 2014 2:21 pm 
Registered User

Joined: May 2014
Posts: 9

Offline
MaxIcon wrote:
Dahua's factory support is terrible. You have to either get it from the vendor you bought from, or find someone on the web that has it.



that's because they don't have office is USA. all sales channel is via distributors.

some distributor's service is very bad, i used to buy from hd security store from amazon, they are BAD, no respond to my email. when they do, they can't answer my questions, return instead.

then i switched my 2nd project from TECH VIDEO in amazon, they give much better service and tech support. i had milestone system, they called me and walked me through.

so from my experience, i love dahua products, but need pick the right vendor.


Top
 Profile  
Reply with quote  

  
 Post subject: Re: Dahua firmware
PostPosted: Sun May 25, 2014 11:14 pm 
Registered User

Joined: May 2014
Posts: 1

Offline
Hi All, just wanted to say thanks for all the people uploading firmwares. I used everyones experiences here to successfully upgrade the firmware on a NVR3104-P.

I bought a NVR3104-P 4 channel NVR from securitycameraking.com. They brand it as a '4CH Tiny Network Video Recorder, Product# NVR-ELT-4'

It came with an NTSC firmware from mid 2013 (cant remember exact date)

I wanted the PAL firmware version as I live in New Zealand and we are on the PAL standard.

I downloaded the PAL firmware version General_NVR3xxx_Eng_P_V2.616.0000.0.R.20140110.zip from the link provided in this thread http://www.mmnt.net/db/0/0/ftp.wintel.fi/drivers/dahua/NVR-sw/NVR-3XXX/Ver2.616

I used the config tool ConfigTool v.1.07.2 R.130304 to upgrade the firmware.

The new firmware is working well. A few enhancements I have noticed in the upgraded firmware are:

The Biggest plus for me personally - the NVR website is working in Chrome Browser for both preview and playback
New menu from the NVR to upgrade IPC Cameras.
Motion Detect working correctly now for my D-LINK DCS-6010L IP camera (connected with ONVIF)
The Shutdown menu now has 4 options - Shutdown, Logout, Restart, Switch User
I'm sure there are other changes that I haven't noticed yet...

Thanks to all, Jono


Top
 Profile  
Reply with quote  

  
 Post subject: Re: Dahua firmware
PostPosted: Tue May 27, 2014 10:10 am 
Registered User

Joined: May 2012
Posts: 64

Offline
I will report that the General_IPC-HX3(2)XXX_Eng_N_V2.212 greatly improves IR performance and noise reduction on the IPC-HFW3200S 2 Megapixel Full HD Network Small IR-Bullet Camera! Wow, what a difference from the former 2.210 firmware I had running.

I also started to apply this firmware to all of my IPC-HDB3200C 2 Megapixel Full HD Vandal-proof Network Mini Dome Cameras. The result here is faster response time through the browser and great (as if it was not before) FireFox compatibilty! I also think the WDR settings work better and light sensitivity is better.

Is there a PDF to the General_IPC-HX3(2)XXX_Eng_N_V2.212 firmware detailing the changes?


Top
 Profile  
Reply with quote  

  
 Post subject: Re: Dahua firmware
PostPosted: Fri May 30, 2014 10:56 am 
Registered User

Joined: Apr 2014
Posts: 7

Offline
I found 'General_IPC-HX3(2)XXX_Eng_P_V2.420.0000.0.R.20140414' on an FTP server, but I haven't come across the NTSC version.

Anyone been able to hunt it down yet?


Top
 Profile  
Reply with quote  

  
 Post subject: Re: Dahua firmware
PostPosted: Tue Jun 03, 2014 2:32 am 
User avatar
Registered User

Joined: Jan 2013
Posts: 35

Offline
anyone here have a NVR7408-8P?

just received one a few days ago and running General_NVR7xxx_Eng_P_V3.200.0000.1.R.20131230.bin


Top
 Profile  
Reply with quote  

  
 Post subject: Re: Dahua firmware
PostPosted: Tue Jun 03, 2014 3:11 am 
Registered User

Joined: Jun 2014
Posts: 1

Offline
Hello everyone and thanks upfront for any suggestion. I have NVR 5216-P (the POE version) and in the General Info it mentions Video standard NTSC. this is the only option. My firmware is 2.610.0000.3 dated 23/02/2013. My question is since I only have 6 cameras connected and I wanted to be able to live preview them as large as possible, currently my only view options are 1, 4, 8 ,9 and 16 cameras, there is no 6 camera option like the web interface. Is there another firmware per anyone's knowledge that could give me this option for 6 camera live view?
Thanks again.


Top
 Profile  
Reply with quote  

Display posts from previous:  Sort by  
Reply to topic  [ 990 posts ]  Go to page Previous  1 ... 32, 33, 34, 35, 36, 37, 38 ... 66  Next


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

It is currently Fri Dec 14, 2018 1:09 pm
cron

The contents of this webpage are copyright © 2003-2016 CCTVForum.com. All Rights Reserved.