Hikvision Raptor 5.1

Hi!

Sometimes there are problems with hosting, but then it works!

Photos that did not watch the same ones I posted on this forum.

Apparently you have to register on my forum and then screenshots will be available!

I'm sorry, but I have on the forum all in Russian;)

No problems, thank you for sharing your work.

For me to find a similar place was not that difficult with the previous search pattern.

If you can test this patch, then write about it please!

For myself, I did it as a custom firmware.

This firmware, I do not give to share.

If you can test this patch, then write about it please!

For me nothing changes. NAS function don't work as here http://www.cctvforum.com/viewtopic.php?p=245921#p245921.

For me nothing changes. NAS function don't work as here viewtopic.php?p=245921#p245921.

It was one of similar locations in the code.

If you did everything right and did not work, we will look further!

I changed code in HEX editor CTR-F and type as I see it in ur screenshot damp davinci DC C0 9D E5 and so on, but not D4 C0 9D E5 2C 00 00 1A 07 00 5C E1 2A 00 00 1A

and change similar to 00 00 00 00 - DC C0 9D E5 00 00 00 00 0B 00 5C E1 00 00 00 00. Then restart, Web UI works, NAS uninitialised.

I changed code in HEX editor CTR-F and type as I see it in ur screenshot damp davinci DC C0 9D E5 and so on, but not D4 C0 9D E5 2C 00 00 1A 07 00 5C E1 2A 00 00 1A

and change similar to 00 00 00 00 - DC C0 9D E5 00 00 00 00 0B 00 5C E1 00 00 00 00. Then restart, Web UI works, NAS uninitialised.

Maybe there is some misunderstanding of the situation!!!

NAS patch for raptor 5.1.6 140612!!!

D4 C0 9D E5 2C ... - 5.0.2 in my screenshot

DC C0 9D E5 .... - 5.1.6 140612

The algorithm in the program of transition to two error-handling routine event. The patch removes them and nothing more.

How should work really unknown.

I found just the place, which was considered to have 5.0.X and what to look for 5.1.6.

More screenshots of the same!

Follow the red line

5.0.2

5.1.6

Hi!

D4 C0 9D E5 2C 00 00 1A 07 00 5C E1 2A 00 00 1A - original davinci

D4 C0 9D E5 00 00 00 00 07 00 5C E1 00 00 00 00 - patch

Those text I can't find in 5.1.6 davinci file.

But DC C0 9D E5 (like it seen on davinci damp screenshot) was finded and I changed it with zeros.

Anyway NAS function in my cam not worked with previous patch and with present still not work.

Вот такая вот фигня

Oops!

My mistake. Of course in 5.1.6 140612 code is

DC C0 9D E5 49 00 00 1A-0B 00 5C E1 47 00 00 1A

DC C0 9D E5 00 00 00 1A-0B 00 5C E1 00 00 00 00

There in one the same code.

But why doesnt work i don't know!

Да мог бы сразу по русски написать и не парить мозг

Другого такого же места я не нашёл! Если в 5.0.2 хватало того патча, а его я расписал, что это такое, то почему не айс - непонятно!

Hi guys.. I've been searching long for a solution and understand this may not be the right thread but you guys seem on track on here!

I am trying to have my 2 Hikvision DS-2CD2142FWD-IW hardwired cameras record directly to my Drobo5n. I can't find any info relating to having this done specifically to Drobo NAS.

Both cameras are wired POE to my router>Drobo. Also have Mac Pro running ElCapitan over wifi.

Im pretty green so please understand my confusion/frustration!

Cheers