Jump to content
Sign in to follow this  
sgl

Flashing HIKVision firmware onto Swann Cameras

Recommended Posts

Hello,

 

I have 3 different models of cameras (CONHD-A1080P(HD-820), CONHD-A3MPB4(HD-825), CONHD-and C3MPB(HD-825).

 

I was successful and able to upgrade the the C3MPB to HIKVision firmware 5.4.5_170123. The other cameras failed with "Upgrade failed."

 

The C3MPB was on Swann 5.2.0 and I went HIKVision 5.4.1 -> 5.4.5_170123

 

The A3MPB4 are on Swann 5.0 and I tried flashing hikvsion 5.1.2 firmware

 

The A1080P are on Swann 5.1.2 and I tried flashing hikvsion 5.1.2 firmware

 

 

Is there a chance these are non hikvision cameras? I'm probably going to try opening one up and taking look.

Share this post


Link to post
Share on other sites

I have found that with these newer Hikvision firmware releases, that I had to flash several revisions to get the most current version.

 

For example, 5.1 to 5.2 to 5.3 and then to 5.4

 

Otherwise I got the same errors that you did, this was for both Hikvision branded USA cameras and Lorex versions.

Share this post


Link to post
Share on other sites

i have swann 7200 NVR and 6 swann HD-820CAM (DS-2CD2032)

 

i would like to get new hikvision firmware on thoses cam to use intrusion and line crossing detection... does this will help to reduce false alarm at night with outside camera

 

but on the european site the firmware are too recents (they seem to have removed the old firmware) .. mines are from 2013... so i need

earlier version.

 

to support line crossing and intrusion do i will also need to update the NVR ?

 

i did a update from swann site because email (google) was not working and after this im not able to acess cam that are directly pluged in the nvr and set a plug and play ... (i have two that are connected in a poe switch and thoses two are working perfectly)

Share this post


Link to post
Share on other sites

any can help me ?

 

where i can find old firmware to upgrade to new hikfirmware ?

 

currently the firmware of my swann cam hd-830 is

4.0.9

 

i suppose i need many versions to make it work with the most recent firmware

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×