Jump to content
Sign in to follow this  
steven6982

Hi all.x-core product DVR and CMS sotfware problem

Recommended Posts

Hi all.x-core product DVR and CMS sotfware problem

We use 20nos DVR XVR264-1631F.

Basically 1 PC connect 4 DVR with 64 cameras

Use 6 PC connect 20 nos DVR total 295 camera.

Anolog 286 and IP Camera 9.

Using Cat6 cable from DVR connect to Switcher

 

Set 1

1)GSW3208M1=8 ports 10/100/1000Base-TX + 2 ports GbE SFP slot Gigabit L2 Managed

((Connect 8 DVR))

2)SFP-7000-S85-DD=1.25G Gigabit Ethernet SFP Transciever

((Connect 2 PC))

 

Set 2

1)GSW3424M1= cost-effect, high performance, managed L2 Ethernet with 20 x 10/100/1000Base-T ports and 4 x Gigabit Ethernet combo (10/100/1000Base-T or 1000Base-X) ports

((Connect 12 DVR))

2)SFP-7000-S85-DD=1.25G Gigabit Ethernet SFP Transciever

((Connect 4 PC))

 

2 Place to install all this.

Basement 1 for All 6 pc to view all the camera.(Live view, PlayBack and Backup)

Basement 2 for all 20 nos DVR .

Basement 1 To Basement 2 is using Fibre optic cable to connect.

 

Problem

Sometimes PC software CMS show error message

example : DVR 8 Network disconnect.

we try connect back cannot , need to restart the DVR .

We check on DVR side , DVR is working normal.But the connection still Problem.

after Restart DVR try connect in the PC CMS software is working.

ask supplier , always say pc problem , switcher problem.

 

all the PC network speed set to 1G

But the DVR to Switcher just 100M only.

 

The PC spec can support IP Camera system

The Switcher is L2 Switch.(also can support IP camera System).

i Suspect is they DVR problem .

what can i do to solve the DVR Connect Problem. Without Change all the DVR!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×