Jump to content
Sign in to follow this  
maxastuto

Problems updating DVR SETIK ST 6204H

Recommended Posts

Hi, I have a DVR SETIK ST 6204H with firmware V4.00.R10.00000062.0 of September 17, 2012. This DVR is identical (I have seen the attached photos of the card and it is identical) to the dvr DVRS -26204A I saw in the forum. This post was provided with the link to download it (but was denied access).

The updated firmware is:

V4.00.R10.20130220

I need it because my dvr software does not have the test function for checking emails with the smtp server.

It also has the problem that sometimes it only emits a beep and always reboots (reloops) until I disconnect the hard drive and format it aside (I've tried tens and dozens of hard drives both mechanical and ssd but the problem It is often manifested. I have been told that you need to unplug the LAN cable,

But so the dvr is no longer in the network and can not be seen from a remote connection ...

Does anyone know where I can find this firmware? thank you very much

Share this post


Link to post
Share on other sites

So, I opened the case of my SETIK ST6204H DVR and saw that there is an sticker with written paper

5204H 201304170180. "There is also a printed" PCB 5216 V1.02 "printed on the back of the motherboard, and there is another letter" 20120831 "in a line below.

In a forum I saw the picture of an open case there an OLTEC H264 DVR808HD DVR that holds the same identical motherboard and even a DVR-DVR-26204A DVR has the same identical motherboard. I replaced all electrolytic capacitors (one from 220uF one from 470uF and four from 1000 uFs) but the reboot failure is still present. Public photo indoor. View from top and view from bottom

85220529_Motheboardbottonview.JPG.2535a2b2bd9db6c23feb943459374399.JPG

985860163_Motherboardtopview.JPG.4f8134c02d1ba2f0b263994a10996471.JPG

Share this post


Link to post
Share on other sites

Hi. You are wasting your time

 

Your dvr is to old for manufacturers to have a firmware update

You can't turn old into new.

 

Time for a new one

Share this post


Link to post
Share on other sites
I'm looking for the latest firmware or the latest firmware of this dvr

 

 

Then look for 2012 ........... And just imagine it's 2017

 

 

ITS TOO OLD TO BOTHER WITH

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×