Jump to content
Sign in to follow this  
wyattwic

Securing my home with an Access control system

Recommended Posts

Hello everyone!

 

I own a very small business out of my house and I am getting tired of stolen keys. I decided to install my own access control system but I am having issues getting a exact design and install plan together. Help would be very appreciated!

 

My current setup in mind is for two doors. Each door has a RFID/Keypad combo (http://goo.gl/lO9gTt) and a door strike. The knobs are locked with an emergency key.

 

So far the design is good however I need to have these units accessible over the network so that codes and cards can be enabled/disabled as needed. I was looking into something like this control board (http://goo.gl/PS7LJo) however I am unsure as to how I should integrate RFID/Keypad combo into the controller.

 

Tip and suggestions would be awesome!

Share this post


Link to post
Share on other sites

Hello everyone!

 

I own a very small business out of my house and I am getting tired of stolen keys. I decided to install my own access control system but I am having issues getting a exact design and install plan together. Help would be very appreciated!

 

My current setup in mind is for two doors. Each door has a RFID/Keypad combo (http://goo.gl/lO9gTt) and a door strike. The knobs are locked with an emergency key.

 

So far the design is good however I need to have these units accessible over the network so that codes and cards can be enabled/disabled as needed. I was looking into something like this control board (http://goo.gl/PS7LJo) however I am unsure as to how I should integrate RFID/Keypad combo into the controller.

 

Tip and suggestions would be awesome!

 

For such a small installation, I'm not sure you really need identity management. With the use of controllers and such comes the cost of access control management software. I would just buy two readers and several RFID ID cards, and just program the two readers individually. I wouldn't be able to justify the cost of paying for the capability to change things over a network for a 2 reader install (unless you are planning to have a lot of users).

 

However, if you do really need the networking capability, I would recommend Rosslare as the product of choice. It's much more budget oriented and suitable for a home user. AC-215 can do two card readers. Just buy a backup battery. Not sure on how much their client software is (AxTraxNG).

 

Let me know if you need any Rosslare stuff and I can help you out.

Share this post


Link to post
Share on other sites

AXIS has a 2 door IP/POE system for around 500 that does not require software for up to ten doors. You just add and manange everything form the built in web browser.

Share this post


Link to post
Share on other sites

Axis is a bit above my budget, $500 is my total budget. Hardware, controller, software, total.

 

Problem with the bluetooth lock is that I need logging, we have lots of outside contractors and codes change at least once a day.

 

 

My deadline is approaching, I think I am just going to take a leap of faith and see where it goes.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×