Do I need gang box for Blue emergency PULL station

Hi ,

Do I really need a box to connect a Blue emergency PULL station or I can just use a low voltage plate to make the connections ?

It's for an access system using a 12/24VDC magnet.

Camden CM-700 series

Thanks !

We always mount ours to a box but if you want to use the mounting ring for aesthetics, there is nothing preventing it.

If it's a fire wall then yes use the metal cut in box. If it's not a fire wall then use the plastic ring.

It's not a fire wall. Just a regular wall.

When saying low voltage , it's under what voltage ? 48 VDC ?

Low voltage is anything under 75v

Low voltage is anything under 75v

75V can kill with right current

Low voltage is anything under 75v

75V can kill with right current

So can a 9v battery but the code considers anything below 75v Low Voltage.

 

So can a 9v battery but the code considers anything below 75v Low Voltage.

In electrical power distribution, the United States 2005 National Electrical Code (NEC) defines low (distribution system) voltage as 0 - 49 volts

But in Europe some country consider 36 V and under as low voltage

Interesting.

So where does that leave 75v PA and intercom systems?

Check your local code as well as NEC. If it were me I would mount on a box.