View unanswered posts | View active topics


Reply to topic  [ 47 posts ]  Go to page Previous  1, 2, 3, 4  Next
Author Message
  
 Post subject: Re: New Firmware for AVTECH CPCAM KPD674A 4CH with mouse 10
PostPosted: Sun Apr 10, 2011 6:43 pm 
Registered User

Joined: Apr 2011
Posts: 1

Offline
Hi I have a cpcam 551 and I did a firmware upgrade via internet explorer, now my unit only boots up and displays the h264 and then goes into a blank screen?
I tried turning the unit off and then back on with the files on a formatted fat32 flash drive and it does not responded at all.
Is there anything else I can try?
Is there a place where I can buy just the main board?
Is there any programming I could try?

Regards Terry


Top
 Profile  
Reply with quote  

  
 Post subject: Re: New Firmware for AVTECH CPCAM KPD674A 4CH with mouse 10
PostPosted: Fri Apr 15, 2011 3:09 am 
User avatar
Registered User

Joined: Dec 2010
Posts: 106

Offline
Try hardware reset, following the instructions i send you, at the same time keep the usb (with firmw, 1043) in the usb port.

Link instructions:
https://docs.google.com/viewer?a=v&pid= ... YjA3&hl=en

If it's not working you need to replace the card or send to repair.


Top
 Profile  
Reply with quote  

  
 Post subject: Re: New Firmware for AVTECH CPCAM KPD674A 4CH with mouse 10
PostPosted: Wed Apr 27, 2011 5:58 am 
User avatar
Registered User

Joined: Sep 2008
Posts: 19
Location: SouthEast Europe

Offline
Do somebody have firmware for:

DVR: AvTech AVC761ZAS (8ID200484)
MB: AV761AM-S (02A-1200M3)
Current Firmware: 1200-1012-1030-1018-M3-6C1B


Thanks!


Top
 Profile  
Reply with quote  

  
 Post subject: Re: New Firmware for AVTECH CPCAM KPD674A 4CH with mouse 10
PostPosted: Wed Apr 27, 2011 8:32 am 
User avatar
Registered User

Joined: Dec 2010
Posts: 106

Offline
The last one i have is:

1276

https://docs.google.com/leaf?id=0B_Tf3Y ... y=CKe959cC


Leo


Top
 Profile  
Reply with quote  

  
 Post subject: Re: New Firmware for AVTECH CPCAM KPD674A 4CH with mouse 10
PostPosted: Wed Apr 27, 2011 9:31 am 
User avatar
Registered User

Joined: Sep 2008
Posts: 19
Location: SouthEast Europe

Offline
Leohuangdi wrote:



Thanks for reply!
Please check inbox!


Top
 Profile  
Reply with quote  

  
 Post subject: Re: New Firmware for AVTECH CPCAM KPD674A 4CH with mouse 10
PostPosted: Thu May 05, 2011 5:36 pm 
Registered User

Joined: Jun 2008
Posts: 3

Offline
I have a DVR KPD674ZD and can not upgrade with the firmwares listed above... I have a really old one 1006-1002-1001-1001
Anyone can help me please? Thanks in advance...


Top
 Profile  
Reply with quote  

  
 Post subject: Re: New Firmware for AVTECH CPCAM KPD674A 4CH with mouse 10
PostPosted: Mon Jun 13, 2011 5:45 am 
Registered User

Joined: Jun 2011
Posts: 6

Offline
Hi Roula,

Are you working for AVtech, or doing the AVC KPD674 firmware updates as a hobby?
Is there a change log anywhere that lists the changes or bug fixes in each version?

One feature that would be really good to have is the option to attach the video clip or JPEG snapshot to the trigger email for motion trigger. This would ensure that if the DVR got stolen or damaged during the burglary that there would still be a copy of the video or a snapshot for evidence. Is there any chance of implementing this?

Keep up the good work
Regards Allen


Top
 Profile  
Reply with quote  

  
 Post subject: Re: New Firmware for AVTECH CPCAM KPD674A 4CH with mouse 10
PostPosted: Tue Jun 14, 2011 9:49 am 
User avatar
Registered User

Joined: Dec 2010
Posts: 106

Offline
Hi Allen,

Unfortunally the release notes for the firmwares (as well as the firmwares files) are not published in the web, only people that work in Avtech can access to them. Since the firmwares are really really many, it's almost impossible to publish all of them on the web.

About the mail notification, it should be good if the dvr can send a small video or image by mail, but for the moment this function is supported only by IP cameras.
To don't lose the videos in case the dvr is stolen, you can install the program videoviewer in your PC, and configure it to record in case of motion detection or alarm (even manual record is ok too).

Leo


Top
 Profile  
Reply with quote  

  
 Post subject: Re: New Firmware for AVTECH CPCAM KPD674A 4CH with mouse 10
PostPosted: Tue Jun 14, 2011 1:51 pm 
Registered User

Joined: Jun 2011
Posts: 6

Offline
Hi.

I believe that earlier models of ACtech DVRs used to send an image or series of images.

Also, Iv'e found that Avast Webshield is stopping video playback from working on my win7 pc. Posted on this thread
http://www.cctvforum.com/viewtopic.php?f=56&t=25600&p=157252#p157252

Do you know how to set avast to work with dvr playback other than disabling the web shield completely?

Regards Allen.


Top
 Profile  
Reply with quote  

  
 Post subject: Re: New Firmware for AVTECH CPCAM KPD674A 4CH with mouse 10
PostPosted: Wed Jun 15, 2011 1:54 am 
User avatar
Registered User

Joined: Dec 2010
Posts: 106

Offline
I also have Avast antivirus in my computer (but i have windows XP).
I know that using Mozilla firefox in Win7, there is no problem with the playback even when Antivirus is active, you should have to try it. Remember also to upgrade the dvr to the latest version first.

Leo


Top
 Profile  
Reply with quote  

  
 Post subject: Re: New Firmware for AVTECH CPCAM KPD674A 4CH with mouse 10
PostPosted: Thu Dec 15, 2011 12:41 pm 
Registered User

Joined: Jan 2011
Posts: 10

Offline
Hi mates,

Just wondering if there is any new version for the A board model?

I have on it KPD674A_1043

is it the latest for this time ?

Thanks in advance :wink:


Top
 Profile  
Reply with quote  

  
 Post subject: Re: New Firmware for AVTECH CPCAM KPD674A 4CH with mouse 10
PostPosted: Mon Apr 23, 2012 2:32 pm 
Registered User

Joined: Apr 2006
Posts: 111

Offline
will work with ;
CPCAM CPD550/551/551D
KPD674/674A
MDR674/674A
AVTECH AVC790A/AVC791A/AVC792A/AVC793A/AVC793AD
http://www.ussscctv.com/support/KPD674A_1044.zip

_________________
Evolution for your CCTV Demand low Cost and high Performance


Top
 Profile  
Reply with quote  

  
 Post subject: Re: New Firmware for AVTECH CPCAM KPD674A 4CH with mouse 10
PostPosted: Fri Jun 29, 2012 5:46 pm 
Registered User

Joined: Jun 2011
Posts: 6

Offline
Hi.

I am having trouble with email notification and NTP updates on my AVC791A . They worked for a while with 1043 but at now I get errors in the log saying Fail

Can you please advise what changes/fixes there are in the latest firmware? are there any changes to the notification settings?

Regards Allen.


Top
 Profile  
Reply with quote  

  
 Post subject: Re: New Firmware for AVTECH CPCAM KPD674A 4CH with mouse 10
PostPosted: Sun Jun 02, 2013 7:45 am 
Registered User

Joined: Jun 2013
Posts: 1

Offline
I know this is an old thread but I just wondered if it is worth me upgrading the firmware on my avtech KPD674 dvr from 1017-1007-1010-1009 to the latest 1044.

Thanks in advance


Top
 Profile  
Reply with quote  

  
 Post subject: Re: New Firmware for AVTECH CPCAM KPD674A 4CH with mouse 10
PostPosted: Sun Jan 26, 2014 7:46 am 
Registered User

Joined: Jan 2014
Posts: 1

Offline
is this compatible with this device?
AVC793ZD

KPD674A = AVC793ZD ???
the same as or?
when not i Need a firmaware update for this device AVC793ZD

thanks a lot.


Top
 Profile  
Reply with quote  

Display posts from previous:  Sort by  
Reply to topic  [ 47 posts ]  Go to page Previous  1, 2, 3, 4  Next


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

It is currently Thu Apr 19, 2018 8:07 pm

The contents of this webpage are copyright © 2003-2016 CCTVForum.com. All Rights Reserved.