hikvision 7200 dvr

hi

i bought a new hikvision 7200 dvr.but when i on it i ear countinous beeping sound.can any one help me.

thanks

Go to

-Main menu

--System configuration

---Exception configuration

Exception type: ALL (or what U prefer)

Actions: uncheck all

Save

Sound Audio Warning is the main reason for beeping

When I onn my Dvr I get a loading screen after that ear the countinous beep sound any my screen in black

And it's a new DVr

In the post above is how to turn off/on audio warnings.

I have DS-7204HVIST/SE & DS-7208HVIST/SE

On first boot (camera/vga monitor connected no HDD ) I have the same annoying beep

Both of them take a few seconds to boot up and start recording.

When I have a faulty HDD it takes time (about a minute) to boot up but no recording at all.

Try to connect vga or bnc monitor/tv for the first time.

Thanks for the help. I had a faulty VGA cable. That's the problem. Now it's working fine.

Do you know how to view the video remotely and with my iPhone ?

Plz tell how to view with dynamic ip. I don't have a static ip

It is possible

disable DHCP

Write an ip address for the dvr

First set up dvr

then pc IVMS-4000

when this two work ok

set up Your mobile

(I have a symbian phone)

i have the same problem and i also do that just uncheck the exception that the main reason why the dvr is beeping

Hi.

I found the easiest and quickest way was left click in live view, to bring up the 'Quick Setting Tool Bar'.

First icon Enable Manual Record - All Channels, this should stop the Event/Alarm icon being displayed, and most importantly stop the BEEPING.

Then configure the channels to suit your own requirements.

Only had the DS-7216HGHI-SH for a short time so am still investigating the numerous settings, the beeping was sending me over the edge.

Dave.