Dahua DVR0804HF-U-E hybrid NTSC Firmware needed

I am looking for the firmware for a DVR0804HF-U-E hybrid DVR - NTSC.

If anyone has a copy, please PM me..

Vendor no longer dealing with Dahua.

Thanks.

I am looking for the firmware for a DVR0804HF-U-E hybrid DVR - NTSC.

If anyone has a copy, please PM me..

Vendor no longer dealing with Dahua.

Thanks.

Do you have original firmware for your DVR?

Ppossible to rebuild the firmware based on your and your DVR.

Send firmware to my e-mail.

I do not.

I do not.

Then, let's modify the one that's on your DVR.

Version of your firmware?

Set by the registrar to the outside with a white IP, downloaded your firmware of the DVR will change the firmware and write it down to change the DVR!

I do not.

Then, let's modify the one that's on your DVR.

Set by the DVR to the outside with a white IP, downloaded your firmware of the DVR will change the firmware and write it down to change the DVR!

Or

i have new firmware

General_DVRxx04HF-X-E(V2.0)_Eng_P_V3.200.0001.0.R.20131224

an old

General_DVRxx04HF-X-E_Eng_P_V2.608.0000.1.R.20111205

But maybe is the different planform.

What is the version of your firmware?

The one that is on the DVR now is

General_DVRxx04HF-X_Eng_N_V2.616.0000.0.R.20130305

I do not think it is the right one for the hybrid.

I believe the one should be in it is

General_DVRxx04HX-U-NVR_Eng_PN_TVC_V2.608.0000.0.R.20120917

Is the P for PAL and N for NSTC ?

I think you need HF-X-E firmware!

If you have the firmware for the DVR, which is suitable for your DVR, then it is possible to rebuild and enable NTSC or maybe rebuid your own firmware in DVR.