paco06 0 Posted February 1, 2016 Hello all, I am facing this issue : I have a Dahua DVR with some users account, all have forgotten their passwords.. I can enter locally with super admin password . User's password may be changed then but after a power reset, the OLD configuration is coming back, ever and ever with unknown passwords. Battery has been removed for 20 minutes, factory reset done, no way . Still the old config. appearing with network, accounts etc. I have found nothing regarding automatic config backup. Interestingly enough, when I successfully change the password, the following message issue : << Sauvegarde config. arrêtée >> wich means "Configuration backup stopped" as if the new configuration could not be saved. Please anybody had this kind of behavior before ? Thanks a lot Patrice Share this post Link to post Share on other sites
iTuneDVR 2 Posted February 2, 2016 Hello all, I am facing this issue : I have a Dahua DVR with some users account, all have forgotten their passwords.. I can enter locally with super admin password . User's password may be changed then but after a power reset, the OLD configuration is coming back, ever and ever with unknown passwords. Battery has been removed for 20 minutes, factory reset done, no way . Still the old config. appearing with network, accounts etc. I have found nothing regarding automatic config backup. Interestingly enough, when I successfully change the password, the following message issue : << Sauvegarde config. arrêtée >> wich means "Configuration backup stopped" as if the new configuration could not be saved. Please anybody had this kind of behavior before ? Thanks a lot Patrice Share it But you cad hard delete config by youself !!! Share this post Link to post Share on other sites
paco06 0 Posted February 2, 2016 Share it But you cad hard delete config by youself !!! sorry, I don't understand. Indeed reset can be done but it is lost after a power off-on of the DVR... passwords come back to the original set-up, even if I remove the battery ou do a factory reset. Share this post Link to post Share on other sites
tomcctv 187 Posted February 2, 2016 Hi. Admin is the master user .... Super might not have full rights to system setting so will not change .... Log in with admin and password Share this post Link to post Share on other sites
iTuneDVR 2 Posted February 2, 2016 Share it But you cad hard delete config by youself !!! sorry, I don't understand. Indeed reset can be done but it is lost after a power off-on of the DVR... passwords come back to the original set-up, even if I remove the battery ou do a factory reset. You send me file passwd from you DVR and i saw user and recovered thei password. So share you DVR tro internet (telnet port) and i will see, what's happenig! Share this post Link to post Share on other sites
iTuneDVR 2 Posted February 2, 2016 Hi. Admin is the master user .... Super might not have full rights to system setting so will not change .... Log in with admin and password I think there is other problem there. Hi can change aal, but after reboot all the same! The recovered password is normal, not random and i think configuration don't save, because ..... Share this post Link to post Share on other sites
paco06 0 Posted February 2, 2016 I do not have access to the DVR, it is on a remote office, and i will not go back there before 2 weeks... I send to you via PM the DDNS Hostname anyway Thanks for your concern. Share this post Link to post Share on other sites
iTuneDVR 2 Posted February 2, 2016 I do not have access to the DVR, it is on a remote office, and i will not go back there before 2 weeks...I send to you via PM the DDNS Hostname anyway Thanks for your concern. I'm in! So .... Anybody can enter! It's very bad!!! machine : mb680 processor : 0 cpu family : sh4 cpu type : STx7105 cut : 4.x cpu flags : fpu cache type : split (harvard) icache size : 32KiB (2-way) dcache size : 32KiB (2-way) bogomips : 446.46 dev: size erasesize name mtd0: 00060000 00020000 "boot" mtd1: 00400000 00020000 "rootfs" mtd2: 00600000 00020000 "user" mtd3: 00180000 00020000 "web" mtd4: 00280000 00020000 "slave" mtd5: 00020000 00020000 "custom" mtd6: 00040000 00020000 "logo" mtd7: 000a0000 00020000 "config" mtd8: 000a0000 00020000 "config1" local Hardware = { board = { name = "DVRxx04LE-A", version = "x.xx", extInfo = '' }, }; return Hardware; -- -- "$Id$" -- I'ts common problem, because telnet is don't close & all know password!!! Share this post Link to post Share on other sites
iTuneDVR 2 Posted February 2, 2016 Accept my congratulations to Bitcoin miner settled in your DVR! .btce Remove it or keep it? But next time he return again because telnet is open!!! Remove you DVR from full share and open only 37777 port Share this post Link to post Share on other sites
iTuneDVR 2 Posted February 2, 2016 I think the question is closed! Share this post Link to post Share on other sites
