Jump to content
jcm11215

AHB780XT8-3520D-SA

Recommended Posts

I have a logisaf h.264 hybrid 8 channel Dvr and i cannot get any of my wireless cameras to connect. When i search for cameras the only ip address that it shows is my router. I can get the camera's rtsp streams to play in VLC and i have tried every format listed below as well as using just the ip address of the camera. I would like to flash a new firmware to it if i can find one that will work. Does anyone have this dvr or familar with it. The model # on the bottom of the unit says DVR - 7308E and the pcb board inside says AHB780XT8-3520D-SA V1.01 20140819 Any help or suggestions would be very much appreciated.

 

rtsp:/192.168.2.13/

| rtsp:/192.168.2.13/1.AMP

| rtsp:/192.168.2.13/1/stream1

| rtsp:/192.168.2.13/CAM_ID.password.mp2

| rtsp:/192.168.2.13/CH001.sdp

| rtsp:/192.168.2.13/GetData.cgi

| rtsp:/192.168.2.13/MediaInput/h264

| rtsp:/192.168.2.13/MediaInput/mpeg4

| rtsp:/192.168.2.13/VideoInput/1/h264/1

| rtsp:/192.168.2.13/access_code

| rtsp:/192.168.2.13/access_name_for_stream_1_to_5

| rtsp:/192.168.2.13/av0_0

| rtsp:/192.168.2.13/av2

| rtsp:/192.168.2.13/avn=2

| rtsp:/192.168.2.13/axis-media/media.amp

| rtsp:/192.168.2.13/cam

| rtsp:/192.168.2.13/cam0_0

| rtsp:/192.168.2.13/cam0_1

| rtsp:/192.168.2.13/cam1/h264

| rtsp:/192.168.2.13/cam1/h264/multicast

| rtsp:/192.168.2.13/cam1/mjpeg

| rtsp:/192.168.2.13/cam1/mpeg4

| rtsp:/192.168.2.13/camera.stm

| rtsp:/192.168.2.13/ch0

| rtsp:/192.168.2.13/ch0_unicast_firststream

| rtsp:/192.168.2.13/channel1

| rtsp:/192.168.2.13/h264/media.amp

| rtsp:/192.168.2.13/ch001.sdp

| rtsp:/192.168.2.13/ch0_unicast_secondstream

| rtsp:/192.168.2.13/h264

| rtsp:/192.168.2.13/HighResolutionVideo

| rtsp:/192.168.2.13/image.mpg

| rtsp:/192.168.2.13/img/media.sav

| rtsp:/192.168.2.13/img/video.asf

| rtsp:/192.168.2.13/img/video.sav

| rtsp:/192.168.2.13/ioImage/1

| rtsp:/192.168.2.13/ipcam.sdp

| rtsp:/192.168.2.13/ipcam_h264.sdp

| rtsp:/192.168.2.13/live.sdp

| rtsp:/192.168.2.13/live/h264

| rtsp:/192.168.2.13/live/mpeg4

| rtsp:/192.168.2.13/live_mpeg4.sdp

| rtsp:/192.168.2.13/livestream

| rtsp:/192.168.2.13/livestream/

| rtsp:/192.168.2.13/LowResolutionVideo

| rtsp:/192.168.2.13/media/media.amp

| rtsp:/192.168.2.13/media/video1

| rtsp:/192.168.2.13/mjpeg/media.smp

| rtsp:/192.168.2.13/mp4

| rtsp:/192.168.2.13/mpeg4

| rtsp:/192.168.2.13/mpeg4/1/media.amp

| rtsp:/192.168.2.13/mpeg4/media.smp

| rtsp:/192.168.2.13/mpeg4unicast

| rtsp:/192.168.2.13/mpg4/rtsp.amp

| rtsp:/192.168.2.13/multicaststream

| rtsp:/192.168.2.13/now.mp4

| rtsp:/192.168.2.13/nph-h264.cgi

| rtsp:/192.168.2.13/nphMpeg4/g726-640x

| rtsp:/192.168.2.13/nphMpeg4/g726-640x480

| rtsp:/192.168.2.13/nphMpeg4/nil-320x240

| rtsp:/192.168.2.13/play1.sdp

| rtsp:/192.168.2.13/play2.sdp

| rtsp:/192.168.2.13/rtpvideo1.sdp

| rtsp:/192.168.2.13/rtsp_tunnel

| rtsp:/192.168.2.13/rtsph264

| rtsp:/192.168.2.13/stream1

| rtsp:/192.168.2.13/user.pin.mp2

| rtsp:/192.168.2.13/video.3gp

| rtsp:/192.168.2.13/video.mp4

| rtsp:/192.168.2.13/video1

| rtsp:/192.168.2.13/video1+audio1

| rtsp:/192.168.2.13/vis

| rtsp:/192.168.2.13/wfov

| rtsp:/192.168.2.13/user_defined

|_ rtsp:/192.168.2.13/video

Share this post


Link to post
Share on other sites

It has some camera that are compatible only with the dvr / hvr of the same factory, it has own communication protocol. The ONVIF protocol camera is usually compatible with almost all HVR / NVR, unless the Manufacturer does not place the ONVIF protocol on their HVR / NVR.

 

To know the Model of your DVR/HVR, save the in Advance / Import Export / Config Export Will generate the file Cfg_V4.02.R11.00000117.10001_201611191129.cfg rename it from cfg to zip, open it and look inside the ProductType.ini will contain the PCB model Example: AHB7004T-EL (in this example, firmware 00000081 and 00000117 Is compatible with this DVR/HVR

 

Firmware Download

http://www.hkvstar.com/technology-news/china-dvr-nvr-firmware-download.html

 

Firmware DVR/HVR

 

Firmware PCB 00000114 (AHB7804T-EL) is Compatible with Models:

AHB7804T-EL

AHB7808T-EL

AHB7804T-LM

AHB7804R-EL

AHB7808R-EL

AHB7804R-LM

 

Firmware PCB 00000081 (MBD6304T) is compatible with Models:

MBD6304T-EL

MBD6304T-H

MBD6308T-EL

MBD6004Q-E

MBD6004Q-H

MBD6008Q-EL

 

Firmware PCB 00000117 (AHB7004T-EL) is compatible with Models:

MBD6508T-H

MBD6516T-EL

MBD6508H-H

MBD6608H-H

MBD6508V-H

MBD6516H-EL

MBD6616H-EL

MBD6505E-PH

MBD6505H-PH

MBD6605H-PH

MBD6509E-PEL

MBD6509H-PEL

MBD6609H-PEL

AHB7008T-LM

 

Firmware PCB 00000115 (AHB7008T-LM) is Compatible with Models:

MBD6508T-H

MBD6516T-EL

MBD6508H-H

MBD6608H-H

MBD6508V-H

MBD6516H-EL

MBD6616H-EL

MBD6505E-PH

MBD6505H-PH

MBD6605H-PH

MBD6509E-PEL

MBD6509H-PEL

MBD6609H-PEL

AHB7008T-LM

 

I made a step by step video for DVR recovery if DVR Blink follow link

See in resolution 720p

 

Good luck.

by Idelson - Brazil

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×