Jump to content
Sign in to follow this  
RyanRhey

GV card 3008 system always hangs

Recommended Posts

Goodday!

 

I have a GV card 3008 8channles, i used two card for to get a 16channel input video.

 

heres the CPU specification

 

Intel i core 3. 3.20ghz

2 gb memory

built-in video card

2tb harddisk

Gigabyte B75-HD3 motherboard

windows 7 starter 32bit license

all recording video was saved on the same HDD where the OS was installed.

 

===========================================================================

 

my Problem is that the system always hangs.

1. already reinstall OS, Reformat

2. already reinstall GV card driver and software

3. check system faults but negative.

4.connection, grounding everything is okay.

 

the system sometimes run for a long period of time then again it hangs.

 

all parts are brandnew.

 

=========================================================

 

i already replace the card with a new one. one card has the problem the driver always lost when the system restarts. i replace with the new ne but still the same

please help me. i dont have any solution of this. thanks

Share this post


Link to post
Share on other sites

would you recommend a video card brand and specification.??

 

is their a direct contact between the two video card and the gv card. thats why the system hangs up.

 

the built in video card is high definition integrated video card. and the latest system architecture vs AGP series.

 

that's why i used the default system.

can you help me out sir?? still system hangs. i don't know why.

Share this post


Link to post
Share on other sites

we don't have any problems with these. ASUS EN7200GS/HTD/256M, GF 7200 GS TurboCache, 256MB, DDR2 SDRAM, Graphics Card

 

 

also two cards one can only be listed as master

Share this post


Link to post
Share on other sites

okay thanks, still system hangs.

 

 

can i use these card.

 

Sparkle GT210 1gb DDR3 64 Bit

 

thanks for my system. please help thanks

Share this post


Link to post
Share on other sites

You should understand that having only 2gb of ram for a windows 7 32 bit system is going to make it tough to run even ms word on it.

 

Especially if your graphics is built in, it will draw some of that, if not half of that 2gb ram, and you will end up with a windows 7 32 bit system running on 1gb ram.

 

What you need to do is get at least 4gb ram, or 8gb ram (on a windows 7 64 bit system, because if it stays on the 32 bit system, windows only uses up to 3.7 gigs of your ram and the rest is wasted).

 

And yes, your NVidia gt210 is okay and should be compatible.

Share this post


Link to post
Share on other sites

ive already install 4gb memory and the manufacturer says that the built would be okay.

 

but still im still experiencing especially in 16channels up.

 

thanks

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×