fasterboss 0 Posted February 20, 2017 Hi, I have a HOSAFE 13MB6 HD IP Camera it was working badly and I did a reset And now the camera does not work, it does not detect the camera, to enter the settings The camera has no button to rezet, someone knows if it is possible to somehow enter the camera settings Sorry for any translation error Share this post Link to post Share on other sites
51cent 8 Posted February 21, 2017 look for Onvif device manager 2.2.250, install it and see if it can see the camera. Share this post Link to post Share on other sites
fasterboss 0 Posted February 22, 2017 Thanks for the help, yes already installed ONVIF Device Manager But nothing appears, I do not know the ip camera Share this post Link to post Share on other sites
tomcctv 187 Posted February 22, 2017 Thanks for the help, yes already installed ONVIF Device ManagerBut nothing appears, I do not know the ip camera Hi $30 wifi is not going to be onvif Hi, I have a HOSAFE 13MB6 HD IP Camera it was working badly and I did a reset It is not working badly...... look at camera spec..... that bad And another brand with p2p setup that you have no clue were your network is going too. Share this post Link to post Share on other sites
