new camera problem

hi i have an annke dvr

i have

1 1080p cvi camera by the front door 25fps

1 960p camera by the back door 25fps

1 960p camera on the car25fps

i replaced the one on the car with a 1080p cvi sony starvis camera and now the fps on the front door cvi camera has dropped to 7fps and wont go higher than 7fps,

silly thing.

if i remove the new 1080p cvi camera i can change front door camera to 25fps , but not with the new camera conected.

hope someone can help as i am pulling my hair out and annke are useless .

here is a link to my dvr .

http://www.annke.com/annke-4ch-1080p-ahd-security-system-dg41nc.html

Hi. You need to set both cameras to 15fps ..... they will not run at 30.

10fps is best for that dvr

Hi. You need to set both cameras to 15fps ..... they will not run at 30.

10fps is best for that dvr

tried that it didn't make a difference,

Hi. You need to set both cameras to 15fps ..... they will not run at 30.

10fps is best for that dvr

 

 

tried that it didn't make a difference,

Hi set both to 7

Also take into account playback on that dvr is only 10fps

Hi. You need to set both cameras to 15fps ..... they will not run at 30.

10fps is best for that dvr

 

 

tried that it didn't make a difference,

 

Hi set both to 7

 

Also take into account playback on that dvr is only 10fps

it should record at 1080p 15fps . or 180n 30fps

the other 2 cameras are recording at 25fps