Jump to content
thepatriot

Avtech 674 & Remote View

Recommended Posts

Hi all, I'm looking for some help re. remote connection for Avtech 674.

 

I recently connected the unit to my network with an IP of 192.168.1.10 on port 3063.

The system works fine on my LAN, I can connect to the DVR on 3 fixed PCs and also wirelessly.

 

However I can not view remotely over the web.

I have a Buffalo Airstation router, I have forwarded port 3063 both TCP & UDP.

Online port checking tools show the port as being open.

But if I try to connect by inserting my ip:port I get an error saying internet explorer can not display the page.

 

After reading on this forum I tried Rex Swains page http://www.rexswain.com/httpview.html and that brings back details of the DVR login screen. But I don't get that if I point my browser to it or video viewer software.

 

Any ideas where I'm going wrong ?

Share this post


Link to post
Share on other sites

make sure you have http:// before the address.

also if its not an HTTP port then sometimes it wont work, if the DVR has an HTTP port then you would use that instead.

Should work with the video viewer software though.

Share this post


Link to post
Share on other sites

yeh I have been putting the http:// before the address.

 

The dvr has no seperate ports for streaming or upload download, just "Port".

This was originally set to 80. I tried changing it back to 80 and forwarding port 80 to it in the router but got the same problem. I'm baffled.

Share this post


Link to post
Share on other sites

192.168.1.10 is the local address, accessible only on your LAN. To access outside your LAN, you need to know your public ip address. Go here http://whatismyipaddress.com/. Use http ://public ip address:port number to access dvr outside your local network.

 

You may have to allow active x to run on Internet Explorer if the dvr uses it. Go to tools-internet options-security and set all zones to low if needed. Reset all levels to default or the original settings once done.

Share this post


Link to post
Share on other sites

Many thanks for the replies, I've got it sorted Now

 

Amazingly the problem was with the router (Buffalo Nfiniti), although the port was open it wasn't allowing connection through it for some reason, my brother updated to a newer version of Buffalo firmware and still the problem persisted.

Then he managed to get hold of a Custom Firmware, and it worked.

So I had set everything up correctly after all.

 

I must say that the remote viewing and playback really is a useful tool. Very Pleased. Also the custom firmware for the router is much better than the standard, and is laid out much better.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×