Jump to content
Sign in to follow this  
spippolone

DVR resolution Firmware update ?

Recommended Posts

Hi, Ii have a DVR model AT-B3520HD with firmware V1.01.2839, the problem is HDMI output resolution, in the menu resolution, there are:

1024X768

1280X1024

1440X900

1920X1080

but it's working until 1440X900 NO WORK in 1920X1080 someone can help me ?

 

There an firmware update ?

 

I hope in your help !! Thank you

Share this post


Link to post
Share on other sites

Hi, thank you for your answer, my problem is this:

I have a DTT modulator with HDMI input, it work fine with 1920X1080 but ho work with 1440X900 input.

 

I have saw in the DVR menu 1920X1080 output video, it is selectable, (and selected) but the signal out recognized to the TV and also the DTT Modulator it is 1440X900,

 

In attach the example... and with 1440X900 on the TV appair Service not avalaible. In fact, if I tune the tv vith the modulator without signal input, the tv recongize the channel (my LCN 777) with the station name (DVR HD), but if tune the TV with same situation but with HDMI connected to 1440X900, the TV don't recognize the channel and don't save nothing in the list.

 

I hope in your help !!

DVRres1920.thumb.jpg.93ceab469fbcf1ed0b3c9defb3cc0bb4.jpg

DVRres1440.thumb.jpg.cb5beb2f7e1a8bf8c2a88321e50bb143.jpg

Share this post


Link to post
Share on other sites

Have you tried connecting the DVR directly to a TBV that supports 1920x1080? I would say it will work.

 

Are you sure that modulator supports 1920x1080?

Share this post


Link to post
Share on other sites
Have you tried connecting the DVR directly to a TBV that supports 1920x1080? I would say it will work.

YES and in the picture the TV is connected directly on HDMI2 Port you can see in bottom.. on the grey line and the DVB was to set 1920X1080 you can see it in other picture..

Are you sure that modulator supports 1920x1080?

YES sure if you connect the HDMI out from PC in a 1920X1080 you can see the picture perfectly on the TV connected to antenna cable.

The problem is just that the modulator work to 1920X1080 only !!

Share this post


Link to post
Share on other sites

brand: SmartWatch

8CH H.264 Network Digital Video Recorder

model: DO-108

 

please help i hav a problem on boot.... when i'll start the unit on smartwatch logo stuck!

its firmware problem or what???

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×