Jump to content
Trafic

Reseting password DVR AverMedia Seb5108 Lite

Recommended Posts

Hello.

 

I own a dvr AverMedia Seb5108 Lite that I have not used one year and forgot the password.

I know there are a masterpassord or hardreset but i did not find any documentation .

On the pcb are two buttons and a few jumpers but I do not know for what.

 

If someone can help me with some advice I would be grateful .

 

Thanks in advance.

IMG_20160428_221203.thumb.jpg.0ddaf6c95967ea1f7c38212ce4bb6bd2.jpg

IMG_20160428_221215.thumb.jpg.52ffd4b6b3058abe09130c6077fdc827.jpg

Share this post


Link to post
Share on other sites

It's best if you can contact the vendor where you purchased it. Master passwords are not usually publicly posted for obvious security reasons. A lot times they have a tool to generate the master password, or it's a very unique string of numbers.

Share this post


Link to post
Share on other sites

I'm the unluckiest man right now...

 

I contacted Aver support and were kind enough to send me a password reset.

But I did not get to use it because before to begin the password reset process, I installed a new HDD to prepare everything. (stupid mistake)

 

After I installed HDD the DVR entered in a RESTART LOOP every 10s color bars appear(normal) but then when it should appear "loading ...%" screen it just restart , again color bars again restart..and so on)... No boot.

I tried everything (another HDD, without HDD,some Recover firmware and firmware found on the Internet, but does not read USB Stick).

 

Some ideas?

PS: Sorry for my english

Thanks

Share this post


Link to post
Share on other sites

Hello.

 

Can someone help me with an EEPROM (Boot) program(Dump) for AverMedia SEB 5116Lite or 5108Lite ?

 

Thanks

Share this post


Link to post
Share on other sites

Hello.

After a lot of work I was able to connect the DVR to a laptop via RS232 and PuTty = > log file

 

| \/ | __ _ _ ____ _____| | |

 

| |\/| |/ _` | '__\ \ / / _ \ | |

 

| | | | (_| | | \ V / __/ | |

 

|_| |_|\__,_|_| \_/ \___|_|_|

 

_ _ ____ _

 

| | | | | __ ) ___ ___ | |_

 

| | | |___| _ \ / _ \ / _ \| __|

 

| |_| |___| |_) | (_) | (_) | |_

 

\___/ |____/ \___/ \___/ \__| ** LOADER ** ,modify by scott

 

** MARVELL BOARD: RD-88F5182-NAS-3 LE

 

 

 

U-Boot 1.1.1 (Aug 21 2009 - 17:14:33) C2A9 B version: 1.1.0.8

 

 

 

Vic Size = 0x8000000

 

DRAM CS[0] base 0x00000000 size 128MB

 

Vic Size = 0x8000000

 

DRAM CS[1] base 0x08000000 size 128MB

 

DRAM Total size 256MB

 

Addresses 20M - 0M are saved for the U-Boot usage.

 

Mem malloc Initialization (20M - 16M): Done

 

NAND:devNum=3,mvBoardGetDeviceBaseAddr /home/users/vicye/C2A9/uboot_c2a9/board/mv88fxx81/Board/boardEnv/mvBoardEnvLib.c 1191

 

 

 

scott test NAND ADDRESS = f6000000,/home/users/vicye/C2A9/uboot_c2a9/board/mv88fxx81/USP/mv_main.c 894

 

enter nand_probe cmd_nand.c 1658

 

 

 

NAND mfr id ec at cmd_nand.c 678

 

 

 

NAND id id 75 at cmd_nand.c 679

 

1 flash chips found. Total nand_chip size: 32 MB

 

0xf6000000: 32 MB

 

devNum=1,mvBoardGetDeviceBaseAddr /home/users/vicye/C2A9/uboot_c2a9/board/mv88fxx81/Board/boardEnv/mvBoardEnvLib.c 1191

 

 

 

scott test NAND ADDRESS = f8000000,/home/users/vicye/C2A9/uboot_c2a9/board/mv88fxx81/USP/mv_main.c 900

 

enter nand_probe cmd_nand.c 1658

 

 

 

NAND mfr id ec at cmd_nand.c 678

 

 

 

NAND id id 75 at cmd_nand.c 679

 

1 flash chips found. Total nand_chip size: 32 MB

 

0xf8000000: 32 MB

 

Soc: 88F5182 A2

 

CPU: ARM926 (Rev 0) running @ 500Mhz

 

Orion 1 streaming disabled

 

SysClock = 166Mhz , TClock = 166Mhz

 

 

USB 0: host mode

 

USB 1: host mode

 

pciIfNum:2,/home/users/vicye/C2A9/uboot_c2a9/board/mv88fxx81/USP/mv_pci.c 628

 

PCI 0: PCI Express Root Complex Interface

 

vendor id:0x11ab header_type:0x0, pci.c 471

 

PCI Scan: Found Bus 0, Device 0, Function 0

 

device id:0x5182, pci.c 479

 

CONFIG_PCI_PNP

 

vendor id:0x11ab header_type:0x0, pci.c 471

 

PCI Scan: Found Bus 0, Device 1, Function 0

 

device id:0x6121, pci.c 479

 

CONFIG_PCI_PNP

 

end at 502 in pci_hose_scan_bus

 

PCI 1: Conventional PCI, speed = 33000000

 

vendor id:0x11ab header_type:0x80, pci.c 471

 

PCI Scan: Found Bus 1, Device 0, Function 0

 

device id:0x5182, pci.c 479

 

CONFIG_PCI_PNP

 

vendor id:0x11ab header_type:0x80, pci.c 471

 

PCI Scan: Found Bus 1, Device 0, Function 1

 

device id:0x5182, pci.c 479

 

CONFIG_PCI_PNP

 

vendor id:0x11ab header_type:0x80, pci.c 471

 

PCI Scan: Found Bus 1, Device 0, Function 2

 

device id:0x5182, pci.c 479

 

CONFIG_PCI_PNP

 

vendor id:0x11ab header_type:0x80, pci.c 471

 

PCI Scan: Found Bus 1, Device 0, Function 3

 

device id:0x5182, pci.c 479

 

CONFIG_PCI_PNP

 

vendor id:0x11ab header_type:0x80, pci.c 471

 

PCI Scan: Found Bus 1, Device 0, Function 4

 

device id:0x5182, pci.c 479

 

CONFIG_PCI_PNP

 

vendor id:0x11ab header_type:0x80, pci.c 471

 

PCI Scan: Found Bus 1, Device 0, Function 5

 

device id:0x5182, pci.c 479

 

CONFIG_PCI_PNP

 

vendor id:0x11ab header_type:0x80, pci.c 471

 

PCI Scan: Found Bus 1, Device 0, Function 6

 

device id:0x5182, pci.c 479

 

CONFIG_PCI_PNP

 

vendor id:0x11ab header_type:0x80, pci.c 471

 

PCI Scan: Found Bus 1, Device 0, Function 7

 

device id:0x5182, pci.c 479

 

CONFIG_PCI_PNP

 

vendor id:0x9413 header_type:0x0, pci.c 471

 

PCI Scan: Found Bus 1, Device 9, Function 0

 

device id:0x6010, pci.c 479

 

=pci.c 492

 

end at 502 in pci_hose_scan_bus

 

i = 0

 

@@value = 243

 

i = 1

 

@@value = 243

 

i = 2

 

@@value = 243

 

i = 3

 

@@value = 243

 

i = 4

 

@@value = 243

 

i = 5

 

@@value = 243

 

i = 6

 

@@value = 243

 

i = 7

 

@@value = 243

 

i = 8

 

@@value = 255

 

i = 9

 

@@value = 255

 

i = 10

 

@@value = 255

 

i = 11

 

@@value = 255

 

i = 12

 

@@value = 255

 

i = 13

 

@@value = 255

 

i = 14

 

@@value = 255

 

i = 15

 

@@value = 255

 

video type = 1

 

Net: eth.c 133

 

egiga0 [PRIME]

 

USB: scanning bus for devices... 1 USB Device(s) found

 

scanning bus for storage devices... i=0

 

usb_get_dev_index i=0

 

usb_get_dev_index dev!=NULL

 

iVendor 0 iProduct 0

 

devClass=9 IFClass=9 IFSubClass=0

 

i=1

 

usb_get_dev_index i=1

 

0 Storage Device(s) found

 

Erasing Nand...Writing to Nand... done

 

Hit any key to stop autoboot: 0

 

 

usb_read: dev 0

 

** Can't read from device 0 **

 

 

** Unable to use usb 0:1 for fatload **

 

 

usb_read: dev 0

 

** Can't read from device 0 **

 

 

** Unable to use usb 0:1 for fatload **

 

## Booting image at 00400000 ...

 

Bad Magic Number

.... and here RESTART

Share this post


Link to post
Share on other sites

Then I tried a reprogramming via TFTPD32 and stuck here ...

 

 

˙#NAND bootstrap

 

 

 

__ __ _ _

 

| \/ | __ _ _ ____ _____| | |

 

| |\/| |/ _` | '__\ \ / / _ \ | |

 

| | | | (_| | | \ V / __/ | |

 

|_| |_|\__,_|_| \_/ \___|_|_|

 

_ _ ____ _

 

| | | | | __ ) ___ ___ | |_

 

| | | |___| _ \ / _ \ / _ \| __|

 

| |_| |___| |_) | (_) | (_) | |_

 

\___/ |____/ \___/ \___/ \__| ** LOADER ** ,modify by scott

 

** MARVELL BOARD: RD-88F5182-NAS-3 LE

 

 

 

U-Boot 1.1.1 (Aug 21 2009 - 17:14:33) C2A9 B version: 1.1.0.8

 

 

 

Vic Size = 0x8000000

 

DRAM CS[0] base 0x00000000 size 128MB

 

Vic Size = 0x8000000

 

DRAM CS[1] base 0x08000000 size 128MB

 

DRAM Total size 256MB

 

Addresses 20M - 0M are saved for the U-Boot usage.

 

Mem malloc Initialization (20M - 16M): Done

 

NAND:devNum=3,mvBoardGetDeviceBaseAddr /home/users/vicye/C2A9/uboot_c2a9/board/mv88fxx81/Board/boardEnv/mvBoardEnvLib.c 1191

 

 

 

scott test NAND ADDRESS = f6000000,/home/users/vicye/C2A9/uboot_c2a9/board/mv88fxx81/USP/mv_main.c 894

 

enter nand_probe cmd_nand.c 1658

 

 

 

NAND mfr id ec at cmd_nand.c 678

 

 

 

NAND id id 75 at cmd_nand.c 679

 

1 flash chips found. Total nand_chip size: 32 MB

 

0xf6000000: 32 MB

 

devNum=1,mvBoardGetDeviceBaseAddr /home/users/vicye/C2A9/uboot_c2a9/board/mv88fxx81/Board/boardEnv/mvBoardEnvLib.c 1191

 

 

 

scott test NAND ADDRESS = f8000000,/home/users/vicye/C2A9/uboot_c2a9/board/mv88fxx81/USP/mv_main.c 900

 

enter nand_probe cmd_nand.c 1658

 

 

NAND mfr id ec at cmd_nand.c 678

 

 

NAND id id 75 at cmd_nand.c 679

 

1 flash chips found. Total nand_chip size: 32 MB

 

0xf8000000: 32 MB

 

 

Soc: 88F5182 A2

 

CPU: ARM926 (Rev 0) running @ 500Mhz

 

Orion 1 streaming disabled

 

SysClock = 166Mhz , TClock = 166Mhz

 

 

USB 0: host mode

 

USB 1: host mode

 

pciIfNum:2,/home/users/vicye/C2A9/uboot_c2a9/board/mv88fxx81/USP/mv_pci.c 628

 

PCI 0: PCI Express Root Complex Interface

 

vendor id:0x11ab header_type:0x0, pci.c 471

 

PCI Scan: Found Bus 0, Device 0, Function 0

 

device id:0x5182, pci.c 479

 

CONFIG_PCI_PNP

 

vendor id:0x11ab header_type:0x0, pci.c 471

 

PCI Scan: Found Bus 0, Device 1, Function 0

 

device id:0x6121, pci.c 479

 

CONFIG_PCI_PNP

 

end at 502 in pci_hose_scan_bus

 

PCI 1: Conventional PCI, speed = 33000000

 

vendor id:0x11ab header_type:0x80, pci.c 471

 

PCI Scan: Found Bus 1, Device 0, Function 0

 

device id:0x5182, pci.c 479

 

CONFIG_PCI_PNP

 

vendor id:0x11ab header_type:0x80, pci.c 471

 

PCI Scan: Found Bus 1, Device 0, Function 1

 

device id:0x5182, pci.c 479

 

CONFIG_PCI_PNP

 

vendor id:0x11ab header_type:0x80, pci.c 471

 

PCI Scan: Found Bus 1, Device 0, Function 2

 

device id:0x5182, pci.c 479

 

CONFIG_PCI_PNP

 

vendor id:0x11ab header_type:0x80, pci.c 471

 

PCI Scan: Found Bus 1, Device 0, Function 3

 

device id:0x5182, pci.c 479

 

CONFIG_PCI_PNP

 

vendor id:0x11ab header_type:0x80, pci.c 471

 

PCI Scan: Found Bus 1, Device 0, Function 4

 

device id:0x5182, pci.c 479

 

CONFIG_PCI_PNP

 

vendor id:0x11ab header_type:0x80, pci.c 471

 

PCI Scan: Found Bus 1, Device 0, Function 5

 

device id:0x5182, pci.c 479

 

CONFIG_PCI_PNP

 

vendor id:0x11ab header_type:0x80, pci.c 471

 

PCI Scan: Found Bus 1, Device 0, Function 6

 

device id:0x5182, pci.c 479

 

CONFIG_PCI_PNP

 

vendor id:0x11ab header_type:0x80, pci.c 471

 

PCI Scan: Found Bus 1, Device 0, Function 7

 

device id:0x5182, pci.c 479

 

CONFIG_PCI_PNP

 

vendor id:0x9413 header_type:0x0, pci.c 471

 

PCI Scan: Found Bus 1, Device 9, Function 0

 

device id:0x6010, pci.c 479

 

=pci.c 492

 

end at 502 in pci_hose_scan_bus

 

i = 0

 

@@value = 243

 

i = 1

 

@@value = 243

 

i = 2

 

@@value = 243

 

i = 3

 

@@value = 243

 

i = 4

 

@@value = 243

 

i = 5

 

@@value = 243

 

i = 6

 

@@value = 243

 

i = 7

 

@@value = 243

 

i = 8

 

@@value = 255

 

i = 9

 

@@value = 255

 

i = 10

 

@@value = 255

 

i = 11

 

@@value = 255

 

i = 12

 

@@value = 255

 

i = 13

 

@@value = 255

 

i = 14

 

@@value = 255

 

i = 15

 

@@value = 255

 

video type = 1

 

Net: eth.c 133

 

egiga0 [PRIME]

 

USB: scanning bus for devices... 1 USB Device(s) found

 

scanning bus for storage devices... i=0

 

usb_get_dev_index i=0

 

usb_get_dev_index dev!=NULL

 

iVendor 0 iProduct 0

 

devClass=9 IFClass=9 IFSubClass=0

 

i=1

 

usb_get_dev_index i=1

 

0 Storage Device(s) found

 

Erasing Nand...Writing to Nand... done

 

Hit any key to stop autoboot: 0

 

Using egiga0 device

 

TFTP from server 10.4.50.5; our IP address is 10.4.50.165

 

Filename 'uImage'.

 

Load address: 0x400000

 

Loading: #################################################################

 

#################################################################

 

#################################################################

 

#################################################################

 

#################################################################

 

#################################################################

 

#########################################################

 

done

 

Bytes transferred = 2288400 (22eb10 hex)

 

## Booting image at 00400000 ...

 

Image Name: Linux-2.6.22.7

 

Created: 2011-01-19 4:23:53 UTC

 

Image Type: ARM Linux Kernel Image (uncompressed)

 

Data Size: 2288336 Bytes = 2.2 MB

 

Load Address: 00008000

 

Entry Point: 00008000

 

Verifying Checksum ... OK

 

OK

 

 

 

Starting kernel ...

 

 

 

Uncompressing Linux................................................................................................................................................. done, booting the kernel.

 

Linux version 2.6.22.7 (vicye@localhost.localdomain) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #58 Wed Jan 19 12:23:41 CST 2011

 

CPU: ARM926EJ-S [41069260] revision 0 (ARMv5TEJ), cr=a0053177

 

Machine: Feroceon

 

Using UBoot passing parameters structure

 

scott trace mac-> mvUbootVer:0x10c010f

 

scott trace mac-> tag->u.mv_uboot.EthAddr:0xff:df:f7:ff:ff:ff

 

scott trace mac->mvMacAddr:0xff:df:f7:ff:ff:ff

 

scott clear mac->mvMacAddr:0x0:0:0:0:0:0

 

Memory policy: ECC disabled, Data cache writeback

 

BUG: not creating mapping for 0x98000000 at 0x98000000 in user region

 

BUG: not creating mapping for 0x40000000 at 0x40000000 in user region

 

CPU0: D VIVT write-back cache

 

CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets

 

CPU0: D cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets

 

Built 1 zonelists. Total pages: 65024

 

Kernel command line: console=ttyS0,115200 root=/dev/nfs rw nfsroot=10.4.50.5:/mnt/ARM_FS/ ip=10.4.50.165:10.4.50.5:::DB88FXX81:egiga0:none

 

PID hash table entries: 1024 (order: 10, 4096 bytes)

 

Console: colour dummy device 80x30

 

Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

 

Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

 

Memory: 128MB 128MB = 256MB total

 

Memory: 255104KB available (4264K code, 275K data, 112K init)

 

Mount-cache hash table entries: 512

 

CPU: Testing write buffer coherency: ok

 

NET: Registered protocol family 16

 

-------------------mvDevNandSet-----------------

 

Sys Clk = 166666667, Tclk = 166666667

 

 

CPU Interface

 

-------------

 

SDRAM_CS0 ....base 00000000, size 128MB

 

SDRAM_CS1 ....base 08000000, size 128MB

 

SDRAM_CS2 ....disable

 

SDRAM_CS3 ....disable

 

PEX0_MEM ....base 98000000, size 128MB

 

PEX0_IO ....base f2000000, size 1MB

 

PCI0_MEM ....base 40000000, size 1GB

 

PCI0_IO ....base f2100000, size 1MB

 

INTER_REGS ....base f1000000, size 1MB

 

DEVICE_CS0 ....no such

 

DEVICE_CS1 ....base f8000000, size 32MB

 

DEVICE_CS2 ....no such

 

DEV_BOOCS ....base f6000000, size 32MB

 

CRYPT_ENG ....base f0000000, size 64KB

 

 

 

Marvell Development Board (LSP Version 3.0.5_NAS_GDP_p8)-- RD-88F5182-NAS-3 Soc: 88F5182 A2

 

 

 

Detected Tclk 166666667 and SysClk 166666667

 

Marvell USB EHCI Host controller #0: c06ec600

 

Marvell USB EHCI Host controller #1: c06ec400

 

PCI: bus0: Fast back to back transfers disabled

 

PCI: bus1: Fast back to back transfers enabled

 

SCSI subsystem initialized

 

usbcore: registered new interface driver usbfs

 

usbcore: registered new interface driver hub

 

usbcore: registered new device driver usb

 

NET: Registered protocol family 2

 

Time: orion_clocksource clocksource has been installed.

 

IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

 

TCP established hash table entries: 8192 (order: 4, 65536 bytes)

 

TCP bind hash table entries: 8192 (order: 3, 32768 bytes)

 

TCP: Hash tables configured (established 8192 bind 8192)

 

TCP reno registered

 

RTC registered

 

cesadev_init(c000c61c)

 

mvCesaInit: sessions=640, queue=64, pSram=f0000000

 

NTFS driver 2.1.28 [Flags: R/W].

 

JFFS2 version 2.2. (NAND) ĂŠ 2001-2006 Red Hat, Inc.

 

io scheduler noop registered

 

io scheduler anticipatory registered (default)

 

io scheduler deadline registered

 

io scheduler cfq registered

 

Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled

 

serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A

 

serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 4) is a 16550A

 

Intel® PRO/1000 Network Driver - version 7.3.20-k2-NAPI

 

Copyright © 1999-2006 Intel Corporation.

 

Marvell Ethernet Driver 'mv_ethernet':

 

o Uncached descriptors in DRAM

 

o DRAM SW cache-coherency

 

o TCP segmentation offload enabled

 

o Checksum offload enabled

 

o Rx desc: 128

 

o Tx desc: 256

 

o Loading network interface 'egiga0'

 

e100: Intel® PRO/100 Network Driver, 3.5.17-k4-NAPI

 

e100: Copyright© 1999-2006 Intel Corporation

 

PPP generic driver version 2.4.2

 

PPP BSD Compression module registered

 

NET: Registered protocol family 24

 

Intergrated Sata device found

 

scsi0 : Marvell SCSI to SATA adapter

 

scsi1 : Marvell SCSI to SATA adapter

 

NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $

 

nand_dev_num=3

 

---------NANDFLASH--------

 

baseLow=0xf6000000

 

baseHigh=0x0

 

size=0x2000000

 

enable=0x1

 

winNum=0x4

 

--------------------------

 

nand physaddr=0xf6000000

 

mv_mtd=0xcff21400

 

NAND device: Manufacturer ID: 0xec, Chip ID: 0x75 (Samsung NAND 32MiB 3,3V 8-bit)

 

Scanning device for bad blocks

 

Using static partition definition

 

Creating 3 MTD partitions on "nand_mtd":

 

0x00000000-0x00100000 : "u-boot"

 

0x00100000-0x00400000 : "uImage"

 

0x00400000-0x02000000 : "file-system"

 

nand_dev_num=3

 

---------NANDFLASH--------

 

baseLow=0xf8000000

 

baseHigh=0x0

 

size=0x2000000

 

enable=0x1

 

winNum=0x6

 

--------------------------

 

nand physaddr=0xf8000000

 

mv_mtd=0xcff21000

 

NAND device: Manufacturer ID: 0xec, Chip ID: 0x75 (Samsung NAND 32MiB 3,3V 8-bit)

 

Scanning device for bad blocks

 

Using static1 partition definition

 

Creating 1 MTD partitions on "nand_mtd1":

 

0x00000000-0x02000000 : "nandflash2"

 

ehci_marvell ehci_marvell.4523: Marvell Orion EHCI

 

ehci_marvell ehci_marvell.4523: new USB bus registered, assigned bus number 1

 

ehci_marvell ehci_marvell.4523: irq 17, io base 0xf1050100

 

ehci_marvell ehci_marvell.4523: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

 

usb usb1: configuration #1 chosen from 1 choice

 

hub 1-0:1.0: USB hub found

 

hub 1-0:1.0: 1 port detected

 

ehci_marvell ehci_marvell.167817: Marvell Orion EHCI

 

ehci_marvell ehci_marvell.167817: new USB bus registered, assigned bus number 2

 

ehci_marvell ehci_marvell.167817: irq 12, io base 0xf10a0100

 

ehci_marvell ehci_marvell.167817: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

 

usb usb2: configuration #1 chosen from 1 choice

 

hub 2-0:1.0: USB hub found

 

hub 2-0:1.0: 1 port detected

 

USB Universal Host Controller Interface driver v3.0

 

Initializing USB Mass Storage driver...

 

usbcore: registered new interface driver usb-storage

 

USB Mass Storage support registered.

 

mice: PS/2 mouse device common for all mice

 

i2c /dev entries driver

 

md: linear personality registered for level -1

 

md: raid0 personality registered for level 0

 

md: raid1 personality registered for level 1

 

raid6: int32x1 20 MB/s

 

raid6: int32x2 32 MB/s

 

raid6: int32x4 37 MB/s

 

raid6: int32x8 37 MB/s

 

raid6: using algorithm int32x4 (37 MB/s)

 

md: raid6 personality registered for level 6

 

md: raid5 personality registered for level 5

 

md: raid4 personality registered for level 4

 

raid5: measuring checksumming speed

 

arm4regs : 386.000 MB/sec

 

8regs : 272.000 MB/sec

 

32regs : 315.600 MB/sec

 

raid5: using function: arm4regs (386.000 MB/sec)

 

device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com

 

dm_crypt using the OCF package.

 

Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).

 

usbcore: registered new interface driver snd-usb-audio

 

usbcore: registered new interface driver snd-usb-caiaq

 

ALSA device list:

 

No soundcards found.

 

oprofile: using timer interrupt.

 

TCP cubic registered

 

NET: Registered protocol family 1

 

NET: Registered protocol family 17

 

N Im = 0x1, P Im= 0x1, value = 0x8240

 

current phy impedance value = 0x4c0a

 

egiga0: link down

 

IP-Config: Guessing netmask 255.0.0.0

 

IP-Config: Complete:

 

device=egiga0, addr=10.4.50.165, mask=255.0.0.0, gw=255.255.255.255,

 

host=DB88FXX81, domain=, nis-domain=(none),

 

bootserver=10.4.50.5, rootserver=10.4.50.5, rootpath=

 

md: Autodetecting RAID arrays.

 

md: autorun ...

 

md: ... autorun DONE.

 

Looking up port of RPC 100003/2 on 10.4.50.5

 

egiga0: link up, half duplex, speed 100 Mbps

 

rpcbind: server 10.4.50.5 not responding, timed out

 

Root-NFS: Unable to get nfsd port number from server, using default

 

Looking up port of RPC 100005/1 on 10.4.50.5

 

rpcbind: server 10.4.50.5 not responding, timed out

 

Root-NFS: Unable to get mountd port number from server, using default

 

mount: server 10.4.50.5 not responding, timed out

 

Root-NFS: Server returned error -5 while mounting /mnt/ARM_FS/

 

VFS: Unable to mount root fs via NFS, trying floppy.

 

VFS: Cannot open root device "nfs" or unknown-block(2,0)

 

Please append a correct "root=" boot option; here are the available partitions:

 

1f00 1024 mtdblock0 (driver?)

 

1f01 3072 mtdblock1 (driver?)

 

1f02 28672 mtdblock2 (driver?)

 

1f03 32768 mtdblock3 (driver?)

 

Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)

 

....here it stuck

 

 

Any ideas?

it is possible that the boot file is not 100% compatible (not found exactly for SEB5108Lite .. just found for SEB 5108/5116 and SEB 5108H/5116H -- )

Share this post


Link to post
Share on other sites

Trying to solve the problem, I installed a program named FreeNFS (It seems to work with Windows 8.1 - my laptop OS) and it changed something.....

 

Looking up port of RPC 100003/2 on 10.4.50.5

 

egiga0: link up, half duplex, speed 100 Mbps

 

call_verify: server 10.4.50.5 requires stronger authentication.

 

Root-NFS: Unable to get nfsd port number from server, using default

 

Looking up port of RPC 100005/1 on 10.4.50.5

 

call_verify: server 10.4.50.5 requires stronger authentication.

 

Root-NFS: Unable to get mountd port number from server, using default

 

 

Does anyone know how I can pass the stronger authentication ?

 

Thanks

Share this post


Link to post
Share on other sites

Hello

 

It looks like I "killed" for good now...

In the absence of suggestions i tried all commands of u-Boot until to this two..

 

bubt - Burn an image on the Boot Nand Flash.

 

file-name

 

Burn a binary image on the t Nand Flash, default file-name is u-boot.bin .

 

bubt_vic- Burn an image on the Boot Nand Flash By Vic.

 

file-name

Burn a binary image on the Boot Flash.

 

 

After run the (bubt_vic) I froze and leds which indicating the presence Hdd lights up (Although no hdd connected)...

Tried reset (buttons not working) disconnected from power supply.. nothing... just LEDs are on... no more connection via serial (for PuTTY) or network for Tftpd32.

 

I believe that the only solution would be a JTAG connection via a cable Jtag to LPT (to flash NAND) ..but I do not know the procedure and what programs to use..

 

Some help please...

Share this post


Link to post
Share on other sites

Hi once you get the test colour screen was the time it gave up.

 

You Will not find anything on dvr to allow you to restart.

 

You will need the software reloaded but it is not worth it and no longer supported.

 

We're are you located ?

Share this post


Link to post
Share on other sites

Hi..I'm from Romania..

I'm sure that can be reset via Jtag, but it is complicate and not have the necessary files and Jtag interface..I know..

Share this post


Link to post
Share on other sites
Hi..I'm from Romania..

I'm sure that can be reset via Jtag, but it is complicate and not have the necessary files and Jtag interface..I know..

 

 

No it can't ..... And 100% it needs a reflash

 

With you already taking it back to test screen .... It has nothing recoverable.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×