Jump to content
JBGUYOT

NVR DIGOO DG-XME (Hi3520d)

Recommended Posts

Hello,

 

I received my NVR DIGOO DG-XME. It seems to have an Hi3520d processor.

I configured my 3 IP cameras ESCAM Brick QD900 WIFI.

But after a few days, I noticed a few dysfunctions:

- motion detection zone settings: 'failed to get the configuration'

- overwrite record history

 

A desolate silence on the part of the support

 

Can be an alternative firmware?

 

Thanks for your help.

Share this post


Link to post
Share on other sites

Hi. 12 Ch nvr for $26. There is not much to expect from it.

 

 

I expected another answer. An answer like 'you can use an alternative firmware such as this one ...'

 

 

Thank you for your participation

Share this post


Link to post
Share on other sites
Hi. 12 Ch nvr for $26. There is not much to expect from it.

 

 

I expected another answer. An answer like 'you can use an alternative firmware such as this one ...'

 

 

Thank you for your participation

 

So you buy cheap crap and expect to use a better software

 

 

Let's see what $24 has got you ......... Did you check the auto setup for remote view ......... Auto opens 5 ports that you have no control over ..... Punches hole past any firewalls and you have no clue were your data is going .....not just from your NVR but everything on your network.

 

The sad part is even if you replace your cheap crap ..... The ports are still open and attached to a China server....... Full router reset and IP change.

Share this post


Link to post
Share on other sites

You are hard with me.....

 

Let us reframe the situation.

 

The DIGOO has an HI3520D and costs $ 25 (produced by China)

 

The mini NVR has an HI3520 and costs $ 35 (produced also by China?)

 

Most of these materials are Chinese AND produced in Shenzen.

 

Much similarity material and yet a lot of ink sank on the mini NVR

 

You do not want to be more constructive, tom?

Share this post


Link to post
Share on other sites
You are hard with me.....

 

Let us reframe the situation.

 

The DIGOO has an HI3520D and costs $ 25 (produced by China)

 

The mini NVR has an HI3520 and costs $ 35 (produced also by China?)

 

Most of these materials are Chinese AND produced in Shenzen.

 

Much similarity material and yet a lot of ink sank on the mini NVR

 

You do not want to be more constructive, tom?

 

 

No am not hard on you.......shanzen products are cheap throwaway crap. ....

 

No support ..... As you have found out

 

Phone call to tech ...... Costs more than what you paid for NVR

 

Sending unit back ...... Costs more than what you paid for it.

 

 

You also need to understand firmware. ...... No firmware update for your unit.

 

Firmware is a way to alter or add to the NVRs existing software...... You can't add another's firmware ...... Just as you can't remove and add better software to your unit.

 

And you have ignored the 5 ports that you have allowed past your firewall and any antivirus you might have on your network .... And there always going to be open ...... Why have your internet linked to a China server.

 

But for your original post you will find you will have better control of your cameras including motion if you link cameras to a switch then to NVR.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×