wire through i-beam

trying to install a camera drilled through the concrete facade and hit a steel beam. there does not appear to be anyway to go under the beam or above. Any tips on drilling a hole through it?

First: Don't.

Second: Don't.

Third: Use a drill bit that has specifications for drilling into steel. Ask your local vendor for advice which to buy. They are more expensive than regular drill bits but if you use a cheap one, you'll soon experience why it's worth to pay the extra bucks.

Fourth: Use cutting oil when drilling steel. If your drill bit gets dry, it gets hot and it will break and you will have to buy a new one.

Fifth: It's gonna take time. Be patient. Take breaks so not to give your self tendonitis.

Sixth: Are you sure there is no other way?

I would recommend checking with an engineer that the size of hole in the location of the beam isn't going to compromise the structure.