Server upgrade postponed



View unanswered posts | View active topics


Reply to topic  [ 4 posts ] 
Author Message
  
 Post subject: residentail camera position help/suggestions
PostPosted: Wed Oct 04, 2017 10:12 pm 
Registered User

Joined: Oct 2017
Posts: 2

Offline
Hello All,

I'm looking for some feedback on exterior camera positioning. I have a small 3 bedroom house in a neighborhood that's been seeing more thefts and minor B&E lately. I want to install cameras to cover most of the exterior to use to provide to the police in the event of someone breaking in or stealing packages off my porch(this happened a few months ago), etc.

I have four HIKVISION DS-2CD2042WD-I cameras and I would want any additional cameras to be wired POE devices unless there's a really good reason to use something that's not. I'll be recording to my home server as well as using home automation software to trigger notifications.

The pattern that I've used to mark the camera placements is based on the ~80deg angle of the hikvision devices so I've I swapped some of them for 180deg fisheyes placement might change significantly. I've numbered my tentative camera placements from 1 to 10 starting in the upper left corner of the site plan and going clockwise. Cameras 3-7 would be mounted to a tall carport that is not shown in the drawing but you can get the idea based on the placement of the cameras.

Cameras 1 and 2 would be placed under the porch roof and catch anyone walking up onto the porch or to the front door. The front door is directly opposite the steps on the north side near camera 2. Camera 8 covers the back door. Other cameras are placed to cover windows or the driveway/access to the shop. I may eventually want to put some additional cameras on the shop as I have quite a few tools that are stored in there and there are two windows that are not currently covered.

Any suggestions or feedback are greatly appreciated.


You do not have the required permissions to view the files attached to this post. Please sign-in or register to view or download.


Top
 Profile  
Reply with quote  

  
 Post subject: Re: residentail camera position help/suggestions
PostPosted: Mon Oct 09, 2017 1:22 am 
Registered User

Joined: Oct 2017
Posts: 53

Offline
I don’t understand why you are placing the cameras in those locations, without seeing the Home I don’t think anyone is going to be able to help you. You have overlapping camera shots, and your placement seems very redundant. Would need more info to help you out buddy.


Top
 Profile  
Reply with quote  

  
 Post subject: Re: residentail camera position help/suggestions
PostPosted: Sun Oct 15, 2017 7:24 pm 
Registered User

Joined: Oct 2017
Posts: 2

Offline
That's totally fair. Would you, or anyone else, be able to point me towards the type of information you need to make suggestions?

This is my first attempt at designing a camera system. I had reasons for each of the camera positions, but I didn't want to overload people by outlining each position in detail. Maybe that's what I should do? Or maybe you need pictures of the outside of the house and what each position would be looking at? Basically I was trying to cover entrances or the approaches to entrances with each camera. So, for example, 8 covers the approach to the back door. 9 covers the windows on that wall of the house.

Same idea for the rest. They are either covering a group of windows or a path that someone would have to take to access a part of my house/yard.

I appreciate the comment. It seems like people aren't super willing to dive in to analyzing these posts.


Top
 Profile  
Reply with quote  

  
 Post subject: Re: residentail camera position help/suggestions
PostPosted: Thu Nov 16, 2017 9:16 am 
User avatar
Registered User

Joined: Jan 2007
Posts: 71

Offline
tadakan wrote:
That's totally fair. Would you, or anyone else, be able to point me towards the type of information you need to make suggestions?



You can take a trial version of IP Video System Design Tool, like I have shown in that topic.
load your site plan and add your cameras, add obstacles (trees, cars) and test people and finally see what images you will get on your DVR/ NRV.

The most important thing that you will be able to see identification/recognition zones based on pixels per meter or pixels per foot.
250 PPM or 76 PPF for Identification of people (by European standard EN62676-4)
125 PPF or about 38 PPF for Recognition of people.
e.t.c.

IMHO your camera positions should be revised. For example, I don't understand the idea behind Camera 10 position.
You can easily rotate Cam10 left (about 30 degrees) for a better view.
Image

Unfortunately, I cannot see the real size of your house to accurately re-scale your drawing.


Top
 Profile  
Reply with quote  

Display posts from previous:  Sort by  
Reply to topic  [ 4 posts ] 


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

It is currently Sat Oct 20, 2018 1:46 am

The contents of this webpage are copyright © 2003-2016 CCTVForum.com. All Rights Reserved.