We are wanting to set this up but can't find clarity on how the reporting works for the archived records.  There is a "use archived records" checkbox on the reporting screen. The help text on this (which is not that helpful) says:

"If this check box is selected, data for an event or user transaction report is obtained from archived events/transactions in the database, rather than from the current “live” events/transactions. Archived events/transactions are those restored using the [Restore Archive] button on the Restoring form of the Archives folder."

So it sounds like you have to restore archived data somehow (the details of which are super muddy) before you can run reports against the data.

I would appreciate any experienced feedback on the Lenel archival to DB process, and also this weird reporting option.

Regards

Ian

on the server i can see the video files and it is recording. everything showing online

I need to find out what cables and connectors i need for the 2 different cameras around 7 years back.

Would the usb-dvr be of any help? Likewise would the radio av receiver be any use?

 Lastly could i use an old laptop to view what the cameras are watching?

Many thanks in advance

J

I need to open all doors when one reader is active.

Like if one of the out strikes all out also strikes.

Please explain grouping of readers, Local and global i/o with at least two intelligent panels

    We have total 6 buildings and Installed all 6 intelligent Controller in each buildings and all are communicating with onguard 8.0.

    And those X2220's are connected with lnl 1320 through 2 wire communication and Its Readers.

   So each building has its own fire panel and all are connected, which is if one building detect fire all buildings alarm will trigger.

  So Now I Configured one Reader ( Fire panel Reader ) which it's input connected with fire panel (REX 1) input 2 connected by Normal open contact.

   So i need help about configuring this, I want to open all doors when the specific output strikes.

   Please explain this details (Local and global I/O Configuration )

  I need open all doors when the reader active or fire panel triggers.

Looking to use an autohotkey process to kick this camera back to its home position every 5 to 15 minutes.

Using Wireshark I have determined that the Web Interface sends the following CGI command

http://<ipaddress>.<port>/web/cgi-bin/hi3510/param.cgi?cmd=preset&-status=1&-number=1

Tried sending this CGI command using curl in a BAT file but expect that this fails because the camera requires authentication not present in this string

Wireshark provides some details as to how the web interface authentication is being done using GET HTTP/1.1 but not following how to include this in a one-line CGI Command

GET / HTTP/1.1
GET /web/index.html HTTP/1.1
Severity level: Chat
Group: Sequence
Host: <ipaddress>:<port>
Connection: keep-alive
Cache-Control: max-age=0
Authorization: Basic <some encrypted code>=
Credentials: <user>:<passwd>
Upgrade-Insecure-Requests: 1
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/114.0.0.0 Safari/537.36 Edg/114.0.1823.82
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7
Accept-Encoding: gzip, deflate
Accept-Language: en-US,en;q=0.9
If-None-Match: "59a47afb.1311"
If-Modified-Since: Mon, 28 Aug 2017 13:20:11 DST

Some CGI manuals suggest the credentials can be included in the string as in &-usr=<user>&-pw=<password>

Can anyone share some Examples of how this might work?

This camera is on a public network and are not concerned about its overall security which is why it is a cheap no-name-brand just used to help our all-volunteer security team see out on extreme weather days.

Thanks in advance

Of course, we have a group policy that turns this on and even desktop administrators don't have the ability to turn it off. The solution will not be simple, it seems.

I was wondering if anyone else experienced this and was able to get around it by any means other than turning off storage sense?

Thanks

I recently installed a HID Proxpro Prox Reader keypad.

The card reader part works fine.  But I can't get PINs working.  

I have a feeling it has to do with the Wiegand Formats.  I've selected "ProxPro Keypad 4-bit Key" and "4 bit ProxPro Keypad" in Infinias with no luck.

When I push the numbers on the PIN pad, I get this in my Infinias Event log:

Full Name: 0-1"  Access Denied Invalid Credential

Full Name: 0-2"  Access Denied Invalid Credentials

etc

Any ideas what I'm missing??

They come with drawings...but I can't seem to figure it out (links below):

http://www.camdencontrols.com/pipelines/resource/a4030_CX_WEC10_Wiring_Diagram_English.pdf

http://www.camdencontrols.com/pipelines/resource/a4020_WC_11_Wiring_Diagram_English.pdf

I'm just down and out and I really need help on trying to wire this thing up for an angry customer. Any help is appreciated.

Thanks

I thought some folks on this forum might be able to point me in right direction for home security forums - some research, forums, discussions, etc.

Here is what I am looking for:

* Home Security Control Panel that has ethernet capability and ios / android apps

* Wired solutions for windows and doors (not looking for any wifi capability)

* A mid to higher end solution

From some initial research looking at the Honeywell Vista line - but really trying to get more feedback, opinions, and some recommendations.

Thanks!

Any tips or tricks for getting rid of false motion detections for REX on 3 sets of glass front doors?  Each door pair has a XMS motion sensor over the center of the door.  Sensitivity jumper removed to decrease sensitivity and still getting periods of false motion every minute or less unlocking the doors…. I’ve adjusted till I’m blue in the face. Any tricks?

thanks!

Being totally new to the world of cctv and I'm no spring chicken, I had a day and a half, reading, you tubing and blundering about trying to get remote access to work again. All worked 

fine on wifi though working out how the new router needs to be configured compounded the issue. We have no land line and use a Huawei B818_7A46 cube type router which seems to be compounding the issue as I 

can not find any information on how to set it up to port forward.

Correct me if I'm wrong but the conclusion I have arrived at is my external (WAN?) IP address has changed so my remote access from my phone will not connect (although the system still sends my phone Alerts.

I have just discovered that maybe I need to set up the DDNS, which I think converts an IP address to a Domain Name. Whenever I try to set up / log in to the Lorex one in the uk site it says continually "page not found"

has anyone else had this issue, and how I get around it?

I also tried to set up the DDNS page in network settings but it does not accept anything I put in and responds with "connected" if I put in my password or " check DDNS connections.

Also, the router configuration also has a DDNS page, do I I need to set up one, the other or both? and can port forwarding be done on this router?

sorry for so many questions but I know the answer must be simple because I accidentally got it working again on the first power outage.

Any pointers gratefully received, thanks.

Regards, Paul.

reinstalled new server and getting this error when opening alarm monitoring

NO default driver specified. 

I did check ODBC settings and it connects fine. tried everything but still the same issue

any assistance appreciated

anyone out there able to help, i am trying to get Time and attendance reports but the system says "The number of records for this report is too large" it only happens if i try to get information for more than 4 months and longer ago.

Ive Searched all LENEL tech help but not very successfully

How to. Program into system as has me a bit in the grey area.

Any right way here?

im running a live trace on a badge and i want it to display an alarm or flash / highlight the tab or bring up a visual notification if it sees activity.

Anyway to set this?

I am the CEO of a small I.T company. It was started 1 year ago. Now we have hired some employees. As you all know, we may have many files to handle. As the number of employees increases, we need to strengthen the security system. Especially the protection of confidential files and documents and also the prevention of unauthorized access.

I am planning to install an access control system in our office. I am confused that which access control system is good for companies like me. When I searched online, I came to know about the card access system. What do you guys think about it? Is it good? Please share your opinions.

Thanks!

I wonder if anyone has any ideas on what type of lock to use in the following scenario.

Double fire escape doors in question need to be held electronically shut to stop teenagers with difficulties from escaping the building. At present they can just push the panic bar and walk out.

The doors only need to be released in an emergency situation i.e. fire alarm triggered. There is no need for any door access to these doors, just electronically fixed. I cant use physical mechanical locking as the teenagers will simply bypass it. Also, I cant have a Maglock on the head of the door as the door frame header is very low and would cause injury. I've been told that a shear lock is not to be used on an emergency escape door as they have difficulties releasing if there is a side loading on them i.e. some one pushing the door before its released.

The doors are as follows.

Double, rebated, wooden, outward opening emergency exit doors with existing panic bar on one door (first to open) and panic bolt on the other (2nd to open)

My feeling is that there will be some kind of electronic panic bar that will release upon an alarm activation....but I'm struggling to find one

Thanks in advance