Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 01/30/2019 in all areas

  1. 1 point
    Hi Folks, I forgot admin password of Hikvision dvr. Could anybody please help me with this I am using Hikvision 2 series DVR. Thanks
  2. 1 point
    anyone here can give me an advise on protecting CCTV cameras from lightning? How to make a proper earth gorunding?
  3. 1 point
    You're welcome. As for Blue Iris: I can't help you. I try to avoid MS-Windows. As for the "other forum": If it's the forum I think it is you'll notice they sell BI
  4. 1 point
    You will need to with blue iris there is a fee for both blue iris and using there app how many cameras are you looking for
  5. 1 point
    First question: What are you trying to achieve? That will determine what kind of cameras you need and how many. Second question: Is there a particular reason you want an analog system, as opposed to IP cameras? Third question: What do you consider to be "average cost?"
  6. 1 point
    Aside from NVR compatibility, when I did my research I found the low-light camera to beat is still the Dahua IPC-HDW5231R-ZE 2MP Starlight. Outdoor usage: Check. Good low-light performance: Check. PoE: Check. $100-$200 USD: Check. It's manual pan/tilt. It has motorized zoom. I'll be using mine with Synology NAS Surveillance Station software... maybe. (Their notification mechanism is currently thoroughly broken. If they don't get it fixed, I'll have to find another solution.) N.B.: I have not installed this camera yet. It's wintertime, here, and I don't feel like hacking on our vinyl soffits and crawling through the attic in sub-freezing temperatures, or tracking snow, slush and mud all over creation.
  7. 1 point
    Ubiquiti is expensive and out of date. Plus remember you need to run along side a PC ..... It has no monitor output qvis uk sells well in Sweden...... And the viper NVR is one of the best on the market now. NVR is compatable 720p upto 4K so a long time before its out of date
  8. 1 point
    Yes that's right what will you be using the system for ...home or business use ?
  9. 1 point
    I have 16 cameras plus an IP camera in the pond on live only I use the ptzs linked to alarm sensors so when a PIR sensor triggers the ptz within the area will turn to the alarm area and home in on the part
  10. 1 point
    As far as I understand, FreePBX is simply a project adding a working webIf to asterisk. So everything should work as it does with a base asterisk. I run a asterisk on raspbian, no special version, just the stuff that you get with apt-get.
  11. 1 point
    Hi. No need to take anything down .....your network is only used for remote viewing with only using two 5mp your ok but I would look at adding later 4mp and even 2mp is small areas or you will need to drop FPS also remember you can use any tvi camera or 4 in 1 camera does not need to be hikvision if you have not bought anything yet I would pic TVT over hikvision security industry had another report yesterday on hik hack
  12. 1 point
    Hi either use ip cameras or get yourself a capture card and use analog .....analog is out of date so I would look at ip cameras. but a nvr is always better
  13. 1 point
    There are two ways to go about this: Find the output current rating on the power supply (I assume the Lorex NVR powers the cameras?) and multiply that by its output voltage. That will give you its approximate max wattage. UPS' are rated in VA (volt-amps), but it'll be close enough. The other way is to actually measure the current draw on the AC side using a true RMS ammeter. (That's the best way.) Then multiply the measured current draw times the line voltage. Next you have to determine whether the point is to protect your surveillance system and allow it to survive short-term outages, or to have it stay up for an extended time when there's an outage. (I note you list a "12V 10" PSU. If that's 12V at 10A, which would probably be about right for an 8-camera system [assuming about 15W/camera], then your want a minimum 120VA UPS. Depending upon the design, that may give you anywhere from 5-10 minutes of uptime [SWAG]). To a degree you can extend uptime by going with a higher-than-recommend-VA UPS, but there are diminishing returns with each bump in VA capacity. Reason is reduced efficiencies as UPS VA capacity goes up. For truly extended runtime you need an "extended runtime" UPS. They don't have greater VA capacity, but more battery. (They also take longer to recover because there's more battery capacity to charge back up. There ain't no free lunches.) E.g.: With a 120W load, a 120VA UPS may give you about 5-10 minutes of uptime, but a 360VA UPS won't necessarily give you 15-30 minutes. In fact: My old power-hog Dell 1600SC server had a 700VA APC SmartUPS on it. The computer + peripherals drew about 200W. The UPS had a runtime of only fifteen minutes with brand new batteries. Speaking of batteries: Make sure to buy a UPS with user-replaceable batteries. They have about a three-year lifespan. Also: Get in the habit of doing run-time tests about every quarter or so, to extend battery life. The UPS manufacturer should have a chart listing estimated run times for each of their UPS' vs. expected loads.
  14. 1 point
    Hi there, I just want to inform you in my case I do not receive anymore the notifications on my mobile phone (gDMSS Plus) when someone rings on the door. It looks to be a general issue Dahua must solve after Google has changed the push service , see reply from my vendor : This afternoon it has been revealed that Google has changed the push service for a number of Android versions and this has impact on a large part of the Android devices using IMOU or GDMSS. This implies that Dahua must solve it, just Dahua is currently celebrating Chinese New Year, which makes the solution just waiting a bit longer. Hope it can help you if you are in the same situation.
  15. 1 point
    Any time you allow Internet access to anything the threat level goes from "very little" to "a lot," regardless of what you try to do to mitigate it. For starters: Login access to your router from the Internet should be entirely prohibited. Period. Incoming connections should be on a "that which is not explicitly allowed is denied" basis. Proper, explicit port-forwarding rules should see to that. Default accounts should be disabled. Or at least have passwords or pass phrases so incredibly long and complicated they might as well be. If login access has any "break in attempt" detection, that can temporarily blacklist source addresses that get an account i.d. and/or password wrong "X number of times in time T," that will tend to slow attackers down so badly the likelihood of success is vanishingly low. Regarding LAN security: It's wise, when possible, to use VLANs and isolate IoT devices to their own VLANs. Also: If IoT devices do not need access to the Internet (e.g.: cameras talking to a local NVR have no need to swap spit with anything on the Internet, other than to occasionally check for firmware updates), they should be prohibited from doing so, either by putting them on their own network segments, using VLANs that don't have access to the Internet gateway, or by blocking them at the gateway. (VLANs enforced by managed Ethernet switches are more secure than border-router blocking. Separate LANs, isolated with internal routers are even more secure.) Lastly: You have to put it in perspective. Unless you're a bank, government entity or some other high-value target: Odds are anybody taking a shot at you is just what we call "knob-twisting" in the I.T. security field. They'll get in if they can, but it's unlikely anybody will mount a concerted attack against you. You're probably at greater risk from what you receive in email and what you browse with your web browser than you are with your NVR and cameras.
  16. 1 point
    look at Aiphone they have many door hone options and may have what you ant
  17. 1 point
    I uploaded it here: VTO+VTH multilingual firmware I hope the "chinese-portuguese" is better than the "chinese-german"... If you don't like the sounds in your language, you either step back to an old SIP firmware as I did (where you are still able to personalize every sound file!) or you wait for a working V4 firmware, where you are at least able to deactivate the sounds. Too bad, that dahua does not implement a "sound" upload option. I guess, this would not be hard to implement but it would make this little device the only one on the market with such options.
  18. 1 point
    No .... if you come on with camera awful then there has to be a reason. calibrating is done on the camera ... it’s done while installing does zoneminder do 4k yet ? does it do h265 ? RTSP ..... I think you will find onvif is the best way explain why you should defend h264 ? Are you using 4k Why ..... because you don’t like to hear that your cameras are not compatible with what you using with them. So your expecting 8mp/4k on equipment that can’t get you there You will need to load software for cam onto pc then go into settings .....being on zoneminder I would also drop resolution down to 4mp .... not 8. Then go into camera zoom and move far out then in and then set it to distance needed then click save
  19. 1 point
    Well that’s your problem........RTSP stream. Why are you messing around with VCL also no camera functions with zoneminder also running at wrong compression. its easy to blame the product....than to set it up right. and to give you a hint on not setup your images are nothing like 2mp never mind 8mp
  20. 1 point
    I can't answer any questions about how many cameras you'll be able to view at once, because I'm relatively new to video surveillance gear, myself, and it'll depend upon your software in any event. But, as a retired Systems, Network & TelCom Admin with over 25 years experience building and maintaining networks (LANs, WANs, WLANs) for a living I'm going to suggest cameras <-> switch <-> powerline <-> router <-> powerline <-> NVR is probably not going to result in a happy outcome. First of all, powerline adaptors have highly variable performance, depending upon a variety of unpredictable factors. At the very least I'd obtain a pair and do network bandwidth, latency and error rate tests between Point A and Point B, then Point B and Point C before proceeding. I'd be surprised if you got sufficient low-error-rate bandwidth to support eight video streams. Secondly: It has been my experience that most routers (and I'm making the assumption you probably have either a common consumer-grade or cable company device) tend to be sub-optimal as network switches. Particularly common WiFi routers. In my opinion, based on experience: Switches to switch, routers to route, and WiFi access points to provide wireless access. Avoid WiFi and powerline where wired is feasible. As to WiFi vs. powerline: Whichever works best, which is highly site-dependant.
  21. 1 point
    Hi I've got a Dahua IP cam & I need to change the logo that appears while I access through a web interface? Is that possible if I choose to change it from firmware file (the bin file)?
  22. 1 point
    Hi. No don’t update Remove your no ip account Your using the Apollo ... good system Delete your no ip and follow the link I have sent to your PM Much more secure and protected
  23. 1 point
    I got the same error, but everything local. I got one PC and one camera. Downloaded latest iVMS 4200 (2.4.xxx). Installed storage server and format a drive. Motion detection alarms works fine, but I can´t play the recorded. Probably nothing is recorded at all. Can´t understand how to configure this software that seems to be powerful, but a nightmare to config. Thanks, Magnus
  24. 1 point
    Forget the ryobi if you want to get your work done with tools that can handle it, not ones that are for light duty homeowner stuff. I have 98% makita....here is a link to the vac (yes, they do have one) i have it and it's great...they have either vac only, if you already own makita battery and charger or they sell full kit... http://www.amazon.com/Makita-BCL180W-18-Volt-Lithium-Ion-Cordless/dp/B0039ITKLU Check out this pic of my enclosed work trailer....2 shelves of mostly makita power tools (cordless)...also have some corded sds drills and what not, not in this pic.. You can see the vac in this pic though
  25. 1 point
    I have to say that the standard of CCTV work I have experienced in the UK is very good in the main. I have learned a bit from remedial works, I have seen the way other's do things and in some cases I have changed the way I do things because I have seen a better way of doing something.
This leaderboard is set to Chicago/GMT-05:00
×