Jump to content

buellwinkle

Members
  • Content Count

    3,866
  • Joined

  • Last visited

Everything posted by buellwinkle

  1. This is not for the faint of heart, so you have been warned. Thanks to CBX for figuring this out on 5.1. This is for people that have 5.1.2 already installed on the camera. The latest firmware, 5.1.2, even if you install the English firmware on China region cameras will be all in Chinese with no option to change to English. If you follow the instructions, you can use 5.1.2 all in English including the day of week and all the menus. HARD WAY 1.First, if you are doing this from Windows, pickup a few free tools (putty, 7-zip & HxD) 2.Login to the camera via the browser 3.Go to Advanced Configuration -> first category (System) -> last tab -> check Telnet 4.Use Putty (or your favorite telnet program) to login. Use the browser password (admin/12345) 5.FTP the Davinci file to your FTP server (you can get free software for this, but I used my NAS at 192.168.0.3) - /bin/ftpput -u username -p password 192.168.0.3 davinci.tar.gz /dav/davinci.tar.gz 6.Grab the davinci.tar.gz file from your FTP server 7.Use 7-Zip on Windows (or whatever tool you want to use to unzip, un-tar the file) and first unzip the file, then tar the file to extract the davinci file, almost 10MB. 8.Open the file with the hex editor (I use HxD) 9.Search for 8a 30 dd e5 38 a0 9d e5 53 90 c4 e5 14 90 9d e5 10.Change string from 38 a0 9d e5 to 01 a0 a0 e3 BEFORE AFTER 11.Save 12.Tar the file, gzip the tar file (I used 7-Zip) 13.Copy the file to your FTP server 14.Put the file back in the camera - /bin/ftpget -u username -p password 192.168.0.3 /dav/davinci.tar.gz davinci.tar.gz 15.reboot (just type reboot in telnet) 16.Login to the camera and all is in English - EASY WAY Some people like it easy, so here it is. 1. Follow steps 1-4 above to log into the camera 2. Download the davinci.tar.gz file from - http://www.networkcameracritic.com/Hikvision/davinci.tar.gz 3. Start from step 13 above.
  2. I've been asked this on my blog, so thought I would share it here. To get a snapshot via an URL, the command would look like this. Tested it on a Hikvision but I would assume Swann/Lorex work the same way. http:// -ip address- /Streaming/channels/1/picture The CGI manual is here - http://www.hikvisioneurope.com/portal/index.php?dir=Technical%20Materials/00%20%20%20Software%20%26%20Development%20Tools/00%20%20%20Development%20Tools/00%20%20%20CGI/&file=HIKVISION%20CGI%20IPMD%20V1.5.9.pdf
  3. Actually, the post is of a review and the links create an eBay search in your country. I don't believe this to be spam, but I could be wrong. I do like the product, quite impressive, just not sure how I can make use of a dash cam as I would want a more discrete solution, not something that looks like a radar detector on my dash plugged into my cig lighter. So instead of an all in one device, I would want one that was a box mounted say under the dash, with a thin wire and a tiny camera lens that I can run up my A-pillar, through the headliner and have just a small lens at the front and rear windshield that stuck on, like double stick tape.
  4. Based on multiple requests, I tried AxxonSmart from the Russian company Axxonsoft. Its free for up to 16 cameras and up to 1TB of storage. It looked good initially but and has awesome features to do analytics and look harmless enough. They claim to use in camera motion detection, but there's a caveat, they say only Axis or Sony cameras. I tried 2 different Axis cameras with no luck, couldn't even get video. Tried a simple Panasonic BL-C230a, fairly common camera and also, no luck, not supportted and didn't work when I tried the setting of a similar model. All my ACTi cameras worked fine with it though. Had a long list of supported cameras. While the software is free, the hardware is not. I would say it take a full core (older i7) to do motion detect event processing per 1.3 MP camera. With no live viewing, I had two cameras recording and easily sucked up 50% of my quad core computer in the background. When I live viewed 4 1.3MP cameras at the same time 2 were armed to record, the CPU was pegged at 99-100% and it took a quite a bit of time to get to the point where I can kill the processes. Most of my cameras do not have dual streaming, but the one that did, I was able to set viewing at VGA and recording at full resolution. This did not help much. I tried it with 4 cameras armed for motion detection, the software just froze, waited a few minutes and couldn't get an image of any cameras. The install process was also painfully slow. It installs a few 3rd party products like PostgreSQL database. When you un-install, it leaves much of this stuff there for you to cleanup. So now I have to figure out how to uninstall it all. Your mileage may vary and it's free but my recomendation is to stay away from this software. Their manual makes server recomendations but they are based on VGA cameras. Here's the link if you want to try it - http://www.axxonsoft.com/products/axxon_smart/smart_start.php
  5. Costco is getting deeper into the network camera game. They have a pair of Swann 1080P bullets for $349. Has anyone tried them yet? It says "State-of-the-art ‘bank quality’ security camera with video quality that has to be seen to be believed", how can you go wrong http://www.costco.com/Swann-1080p-2-Pack-NVR-IP-Bullet-Cameras.product.100039914.html Some believe this to be a Hikvision DS-2CD2032-I, which is not only 1080P, but also 3MP. I came across this spec sheet - http://www.bkgrupe.lt/uploads/docs/_darbinis3/DS-2CD2032-I%20(1).pdf
  6. If you have one of these camera with 5.2.5 in Chinese only and wish to change it to English, I have a fairly simple way and free. But before I release it to the world, I need some test subjects. The only downside is day of week remains in Chinese but frankly the date is so long I turn it off at home and customers anyway. I can probably find a fix for that if it's important, but baby steps. The only risk is you may have to TFTP to put the camera back the way it was and I have 5.2.5 firmware if needed. It uses an old trick but I enhanced it a little. I can likely do the same for 5.2.8 but don't have a 5.2.8 camera here, but if someone provides me access, can do it for that too.
  7. Avigilon told me they are not interested in new dealers as they are full and if I wanted to buy/sell Avigilon, I would have to work through an existing dealer. That was so annoying, took a month only for the dealer they recommended to have lost our order. then a few more weeks until we got the camera. The camera was relatively unique being a telephoto vandal dome so we put up with it, but I would never put up with it otherwise.
  8. I think you mean their Hikvision Darkfighter - DS-2CD6026FHWD-(A) and I would bet it's over a grand with lens and outdoor housing and only 2MP.
  9. You can use a Veracity Pinpoint which splits the PoE so you can use your laptop on the same connection as the camera. The problem is most cameras, even bullets these days don't have exposed Ethernet connectors. We use 2 guys and a pair of cell phones with a little to the right, a little to the left, blah, blah. If it's in your home and you have WiFi, that would help in theory, but a little harder if using NVR's with PoE built in, you have to log into the NVR to see the cameras.
  10. buellwinkle

    DS-2cd2032F-I IP camera

    Is there are reset button? Don't see it in the pictures.
  11. buellwinkle

    DS-2cd2032F-I IP camera

    I just hope they keep making the ds-2cd2032-i as I truly hate that pigtail. Certainly not as huge an improvement between as the ds-2c2132 to the ds-2cd2132f. As for putting a sleeve over the camera, not sure that's wise as these cameras run very hot and putting something on that may impede cooling may shorten it's life.
  12. I do it with shell scripts like on an Arduino or Raspberri PI using the curl command with the XML. I had it working to take the temperature using a temp sensor and update the OSD with the temperature.
  13. Check out Brickcom cameras. The modes that start with a W for wireless. They have cellular radios and you stick in a sim card for remote access. Of course you will still need power as these don't take the magical 9v batteries AK357 has.
  14. buellwinkle

    Mobotox vs h.264

    There's always hope that they will gain their technological dominance once again, but from what I've seen, they remind me of Mercedes Benz. A while back, when you bought an MB, say back in 2004, the car came with a cassette radio. At the time, cassettes were not even being made and the world has switched to CDs, so they were maybe 10 years behind the times. Then they finally came out with CD players in their cars as the need for CD players diminished. My guess is that Mobotix will have h.264 in their cameras when h.264 is no longer relevant. My theory is there's companies out there that work so hard on their product and believe in it so much that they do not feel the need to try competing technologies or follow industry trends, why would they, they had one of the best products many years ago, what could have possibly changed in the world of technology?
  15. It's not an activex plugin, but a plugin nonetheless, works with most browsers but only works on Windows or Mac. So you have three choices; 1. see if there's some sort of app for IP cameras, similar to a smartphone app to view the cameras 2. get cameras that run anywhere like Axis. 3. replace the chromebook with one of the new low cost Windows laptops in the same price range.
  16. What I would do is have 4 cameras minimum which is what we have at each our gates. You can not count on a LPC camera to do double duty for any other purpose, so it is what it is, for LPC, one dedicated camera, the trick will be where to mount it. The other camera that's critical is to capture the action, what went on, did someone try and crash the gate, some trying to climb the gate and that's an overview camera, mounted higher up and seeing the entire picture. The last two are close-up cameras, one on each side of the gate on opposing sides. This is capture details of the car, person, driver. Specially if you have some sort of card-key/fob access where the person has to open their window to see, perfect time to get their face. Do you have an entry dialer kiosk, like for a guest to dial someone's home to request access to the community? If so, you can put a pinhole camera in there. To me that's the best because you get a perfect image of someone's face when they are dialing. As to brand, quality and such, don't know what's available in your area in terms of support and service and what you pay for these cameras, for example, an Axis Q1614-E in the U.S. may be $1,200 but could cost something totally different in South Africa. Also, that price for a 720P camera is so contradictory to the low end network components I wouldn't never use in a commercial install. Before you settle on camera brand, first pick the requirements for resolution, supplemental lighting, lens choices and such. The worry about brand last. Q1614-E may be a nice low light camera, but considering the shape and size. When you have such heavy duty gates topped with barbed wire, do you really want a camera that's not vandal-proof? As for recording. I started off with only 2 cameras 7 years ago with recording to NAS and that was fine, but as that system grows, managing several cameras will be a pain. I understand Axis Camera Companion, but it's a client built on top of edge recording, so if you only have one access point, it can work. If you have a few people needing access, it becomes difficult to manage. It's not a good web browser interface you just assign someone a user/pw. You have to do some magic to copy the configuration from one ACC install to another and if it changes, then what. ACTi has similar setup, but I would use ACTi's NVR software any day. Also, have been starting to use more Dahua and Hikvision in installs, the products from China are built better than a few years ago.
  17. Just get NVR software to do that. Some manufacturers provide that for free as long as you stick with one brand, like Dahua PSS. If expect multiple brands, BlueIris is a low cost way to go, about $40 or if you want something higher end, Milestone XProtect (they have a Go version that's free, but has limits).
  18. I checked two cameras, one unhacked, one hacked to English, both same model, same batch of cameras. The kernel MTD9/10 files were identical, the MTD11/12 are different, so for now, I feel the keep to making the day of week English is in the MTD11/12 files referred to in the MTD mapping as rmd_pri and rmd_sec but they are identical to each other. So need a closer look at the hroot.img file.
  19. What's interesting is that while most files end up in the /dav directory on the camera, there's 2 additional files not in that directory on the camera and that's himage and hroot.img. What I can see is that; himage correlates to MTD9 (krn_pri) & MTD10 (krn_sec), not exactly the same but comparing two different cameras because already had MTD dumps of this camera. hroot.img correlates to MTD11 (rmd_pri) & MTD12 (rmd_sec) krn_pri I assume means kernel, not sure what rmd is.
  20. Was able to modify files in the firmware, create a new digicap.dav file and install it and kept the changes. You were right iTuneDVR, it is easy to do this with just Windows, no Linux needed.
  21. Awesome stuff. It works great to show the firmware version, change language and split the firmware into files. The only thing I'm having a problem with is the "create" option. If I give a new filename, as in hiktools.exe create digicap2.dav 525firmware it tells me "unable to open dav file". If I give it an existing firmware file, it does nothing, does not update it. Am I using it wrong? For those first trying it, it's not a Windows program so you have to run it in a Windows command window. CORRECTION: Didn't see that it did create a new firmware file with the same name as the directory, so 525firmware.dav and included a test file I put in there.
  22. There's something to be said for the service and support he will get with Axis that will never happen with a Chinese camera. A happy medium may be ACTi with the same level of service and support as Axis but for about half the price.
  23. It's not that the cheap illuminators don't work, they will work, sometimes a month, sometimes a few months.
  24. buellwinkle

    Dahua Nexus

    I'm generally not a fan of NVR's, but the Dahua NVR is pretty decent. The web interface is pretty good and works with other brands of cameras, like Hikvision. I have one and a Hikvision side by side, and Dahua is better.
  25. Use cameras with "corridor" mode that lets you flip 1080P 90 degrees to cover a long narrow corridor or in your case an aisle. There's some nice little dome for retail you should look at. Bosch makes a tiny 5MP dome, day only but the store is lit I'm sure and it's under $200. ACTi also makes some cool hi-res domes for this situation.
×