icu2
-
Content Count
7 -
Joined
-
Last visited
Posts posted by icu2
-
-
didn't see the need to remove serial connections before upgrading as I dont think aver would be scanning ports for POS connections? The COM port does not change and com ports are functioning correctly - I have checked the serial data coming through the ports and it is perfect. Nothing has changed except aver version. I am going to roll back to 7.3 to prove that it is a version problem
-
RAID will work but becomes an expensive solution as a 32 ch avermedia uses around 9TB with JBOD configuration
-
total bandwidth is 40-60mb on a 100mb LAN depending on detail/motion of scenes being viewed by ip cameras. The max usable safe level on 100 lan is 65-70 to be stable. HDD's are SV35.5 and max disk read/write is 20mb. The disks are rated to 140mbs so I think it is a aver issue in data handling??
-
-
-
i have a number of systems running with large mp throughput. I have noticed a major limitation is with disk IO (read write speeds). When pushed too hard ie 10-15mp @30fps, the hard drives cant cope because all the cameras are writing to one drive. eventually the systems throw an 'insignificant drive space error' and i have to manually delete some files. i have asked aver to allow users to specify which cameras record on which drives. eg cam 1-8 records to drive 1 and cams 9-16 on drive 2 etc. so far no joy with aver. Geovision took this recommendation on board a long time ago and it means the system can cope better with more megapixels.
Anybody else has problems with this or knows of a solution??
I've noticed that when using Sanyo cameras after a few weeks aver changes the framerate from whatever you set it to MAX (30fps). frustrating!
POS setup
in AverMedia
Posted
Thanks. I will reinstall with everything disconnected to see if that makes a difference. I will let you know