Jump to content

carcol_123

Members
  • Content Count

    34
  • Joined

  • Last visited

Everything posted by carcol_123

  1. I have the Hikvision DS-7604NI NVR and I am able to see live view on my computer, using SADT, I have down loaded the apps IVMS-4500 HD and IVMS-4500 on my ipad, when i dab the centre icon to view number 1 camera I get (no more user can be logged in) so I am unable to view my cameras, has any body any ideas what I am doing wrong
  2. Does any body know if you can delete recordings, if so how
  3. carcol_123

    IP cameras

    Can any body suggest a really good quality HD IP Poe camera around the £100, Samsung are so expensive, are Hikvision cameras any good, I am trying to get the best picture quality at a reasonable price, I have decided to purchase the Samsung NVR SRN-472S recorder, please help a novice
  4. carcol_123

    what camera to buy

    Has any body used these 2 cameras and what are there thoughts on them, the Acura Pro Panasonic 1080p 2.1mp HD-SDI 2.8-12mm VF IR dome camera and the Panasonic HD SDI 2mp 1080p IR zoom lens camera,
  5. carcol_123

    Different DVRs

    I hope there is some one out there that can tell me which would be the better DVR to purchase, the Samsung SRD-480D, SRD-476D and the SRD-443p or the ESPuk DVR41p, at the moment I have the earlier ESPuk which gives a good picture, the new ESP is 30fps like the old one, but i have noticed the Samsung DVRs are only 25fps and this is why I am asking these questions. We are in the process of moving and of cause my cctv set up stays with the house
  6. carcol_123

    Partial recording

    Can any body give me some advise, I have replaced my front 2 cameras to Samsung SCB-2001, my recorder is a ESP DVR-EZPRON, what I am experiencing on motion detection, is that it show me getting out the car from the garage but not driving through the gates and then I suddenly I appear on my drive returned home, this happened to day, the recorder is set the same as for the old cameras, I have not touched these new cameras only to focus them, what am I doing wrong. Colin
  7. carcol_123

    DVR choice

    I think I may have to replace my ESP DVR-EZPRON recorder, has any one any ideas what to replace it with, around the £300 mark and must have D1 resolution in 30fps on every channel
  8. carcol_123

    not recording

    I have a ESP DVR-EZPRON recorder, I have changed 2 of my cameras to Samsung SCB-2001P box cameras, I now find that at times ie returning home it does not record us, but has recorded us leaving, also the remote has stopped working the recorder, are these problems down to the recorder or something else. It is permanently on motion detection. Hope you will reply Colin
  9. Can any body give there opinion on Bosch LTC 0610/11 and LTC 0620/51 cameras regarding giving a really good night vision picture under no light conditions. both are day/night cameras, would you need a illuminator. I find this a very helpful site. Colin
  10. Can any body help and tell me is it ok to fit a 1/2 chip lens ( say a Computar H3Z4512CS-IR) to my Samsung SCB-2001p which has a 1/3 ccd chip. will wait your reply Colin
  11. carcol_123

    Cctv housing

    Can any body help, I purchased 2- Tristar Mk251 cctv camera housings, I think the carriages for the cameras are missing, I have tried the internet but unable to get any where, is Tristar the model and not the make. Will wait your reply Colin
  12. carcol_123

    picture interference

    I am no expert, but I had interference and I fitted BNC ground loop isolators to all my cameras(3), did not solve the problem, so i posted a blog on this site. The answer to my problem was using a cheap mains transformer (you know the one all built in the 13 amp plug top), I replaced it with a separate trans former 12 volt DC and it solved my problems. I get lovely pictures now with no interference, hopefully this is your problem
  13. carcol_123

    Lens size

    I have installed a Samsung SCB-2001p with a 3.5 to 8mm lens over my garage, the 8mm side of the lens is not quite big enough so is very slightly out of focus, before I had a 2.8 to 12 lens, should I stick to this size lens or should I go larger and would this make it easier to focus, with a larger lens. Will wait your response. Colin
  14. carcol_123

    Lens size

    Can I be cheeky and ask if you know the equivalent lens made by Fujinon and Tamron, you have been a great help so far Thanks Colin
  15. carcol_123

    Lens size

    I have found a Computar cs 5-50 lens it is f1.3 would this lens be ok for a good night vision
  16. carcol_123

    Night vision

    Can any body help, I was lead to believe that box cameras gave a better night vision picture, I have installed a Panasonic WV-CP220/b day time picture good at night no picture, so underneath the camera housing I fitted a 48 Led illuminator, still no picture at night, replaced the camera with a Bosch LTC0455 series Dinion, low light a good picture, when really dark can hardly make out a picture, turned on the illuminator no difference. At this moment in time my old cameras with built in Leds gave a better night picture than i am getting with box cameras. Please help my wife is having a go at me for purchasing so many cameras. Colin
  17. I purchased this camera from Ebay, I placed a bid and it came to me that it might be a IP camera and 3 hours from the end Ebay would not allow me to retract my bid, my first thought was to relist it.With your help, if I get a conversion lead and connect to my recorder will I get a picture
  18. carcol_123

    Bosch Dinion cctv camera

    I have this Panasonic WV-CP220/b camera which has no night vision to talk about, this forum suggested an illuminator, so I purchased a 48 LED illuminator and still I do not get any night vision pictures you can see the illuminator is red in the dark, has anybody any ideas, if not I will give up on this camera. Once again thanks to all of you for your help so far. Colin
  19. carcol_123

    Night Vision

    I have just purchased a Samsung SCB-2001p box camera on your recommendation, will it give me a good night vision picture on its own or will I need artificial light in order to see at night, also I purchased a Panasonic WV-CP220/b box camera no complaint with the day time picture, but at night completely useless, unable to make out anything. Any comments will be grateful Colin
  20. carcol_123

    Night Vision

    Thanks kindly for the LEDs information. Colin
  21. carcol_123

    Night Vision

    can you recommend how many LEDS in the illuminator, I am looking at a maximum distance of say 20 metres. Thanks so far for your help. colin
  22. carcol_123

    cctv box cameras

    \I am thinking of replacing my IR cameras with box cameras, (obversely in a housing), to get a better night vision picture, does the box camera need artificial light (ie flood light) to see at night or can these type of camera with say a Lux of 0.05 see perfectly well at night, one other think does the housing need a heater and to be checky what box camera would you recommend. Thanks Colin
  23. carcol_123

    cctv box cameras

    I have taken your advise and returned the camera housing, I am know using conventional housings with 240volt heaters, should I need them, are you able to give me more manufactures and model numbers of box cameras that would suit my situation, residential covering the area in front of my property, once again thank you all so far, o by the way I purchased (cheap)a Panasonic WV-CP220/B, what do you think of this camera
  24. carcol_123

    RF Modulator

    Can any body tell me if there is a digital RF modulator out there, at this moment in time I can watch my cctv cameras on all the TVs in the house through a RF modulator (all of TVs are analogue and digital), what my concern is when I have to replace any of the TVs the new one will only be digital, then what do I do. to watch my cctv cameras. Colin
  25. carcol_123

    cctv box cameras

    With your recommendation I have purchased a second hand Samsung SCB-2001p box camera and also a Videotec VERSO Hi-PoE IPM camera housing (new), will it be ok to connect the camera BNC and power leads to a RJ45 socket and then using the Ethernet lead provided, connect the camera to the control panel and then run another Ethernet lead from the control panel to inside my property and using another BNC to RJ45 convertor, reconnect to my existing BNC and 2.5 12volt leads, any advise would be most helpful. Thanks Colin
×