Jump to content

_bono_vox_

Members
 View Profile  See their activity

  • Content Count

    4

  • Joined

  • Last visited

Posts posted by _bono_vox_

  1. Posted

    Make sure you reset the camera properly, hold down the reset button, unplug the camera, wait 10 seconds, plug it back in, wait about 10 seconds and let go of the reset button, the unplug the camera. Then start the TFTP server with your PC set to 192.0.0.128 and plug the camera in. Make sure the firmware is in the same directory as the tftp-update-loader. I would try 5.1, it's safer.

     

    Also, there's no apparent advantage over 5.1.6 and some features have been removed like Face Detection, but if you feel that you absolutely have to have 5.2, there's no harm in Chinese menus if you are using an NVR or NVR software. You can also use Chrome browser to translate.

     

     

    thanks a lot.

     

    the reset process made my camera back to life.

  2. Posted

    If you messed up the process above, then you need to use the TFTP method to force a firmware install. I would pick 5.1 (doesn't matter English or China). It will work in many different languages with a default of English. The TFTP method is described elsewhere, search for it.

     

    As for the reset, did you follow the proper reset procedure. Don't remember what it is, but I'm sure it's not just pressing the reset button.

     

    ok i will try and search about this

  3. Posted

    Okay well this is good so far as it goes.

     

    Model DS-2CD2032-I

    Serial No. DS-2CD2032-I20140515CCCH464808456

    Firmware Version V5.1.0 build 131202

    Encoding Version V5.0 build 131128

     

    The camera needs to reboot after the flashing, and if you leave the tftp server up you might get downhearted because the camera won't be reachable until it boots with no tftpserver available.

     

    Also while in this mode it exposes the filesystem over FTP, which is nice. I think the developers at Hikvisions really have their **** together, if this was a baseline for software in electronic devices universally then we'd all be happier.

     

    However -- are we "stuck" on this version now for these cameras? How can we get other various bugfixes? Where can we reliably find English digicam.dav files?

     

     

     

     

     

    I'm with the camera constantly restarting unable to access it ... I closed the putty and tried the reset button on the camera without success

     

     

     

    no one?

     

    I tried to apply the solution of the topic and I am without access to camera ... she is self starting

    the program does not find the ip camera

    can someone give me a light on how to reverse the problem?

  4. Posted

    Okay well this is good so far as it goes.

     

    Model DS-2CD2032-I

    Serial No. DS-2CD2032-I20140515CCCH464808456

    Firmware Version V5.1.0 build 131202

    Encoding Version V5.0 build 131128

     

    The camera needs to reboot after the flashing, and if you leave the tftp server up you might get downhearted because the camera won't be reachable until it boots with no tftpserver available.

     

    Also while in this mode it exposes the filesystem over FTP, which is nice. I think the developers at Hikvisions really have their **** together, if this was a baseline for software in electronic devices universally then we'd all be happier.

     

    However -- are we "stuck" on this version now for these cameras? How can we get other various bugfixes? Where can we reliably find English digicam.dav files?

     

     

     

     

     

    I'm with the camera constantly restarting unable to access it ... I closed the putty and tried the reset button on the camera without success

×