VJD

I have an installation that requires a camera in a walk-in freezer. I am looking at the Extreme CCTV EX14 and the Silent Witness Artic Hawk. Anyone have any experience with either of these cameras or have any other suggestions? I need to stay around the same price range as the above-mentioned cameras. Are there any condensation or other installation issues to be worried about? Thanks

I think I still have one of those in a box up in the attic!

Can you share with us in what environment you think they are better than box or IR cameras?

I just had to post this :

I thought the "Camera Master" or similar device would actually be better than using the subjective good old eye.

FYI I got a response from Aver support stating that the drive should work.

Thanks for the info sajaan. Have you tried any hard drives that were not on the supported list? I wonder if any of the Segate SV35 drives would work?

Great info, thanks!

Thanks Wendy. What about the display question?

Is the quality the same between the EB1350net and EB1704hybrid? The specs are the same. Also, in the specs the display resolution is listed at 720 x480 but the diplay frame rate is listed at 120fps CIF. ???

Wolf - Thanks for the heads up on the Nuvico. I was just going to try one out for a job. I know they have had reliability problems with other cams in the past. Maybe I'll try the TBT instead. Lou - The PC police have been alerted. (I though the HS reference was )

you can also do 4 and 9 camera full screen remote view with Aver.

Comments would be appreciated from anyone who has experience with both of these units. I am particularly interested in recording quality. Thanks.

Card and software. GV800 and I think ver 7.02. Asus P4800SE 865PE chipset P4 3GHz 512MB 400MHz DDR NVidia Card (I'll have to check which one)

Email me for a solution. Thanks Tomasz, but no luck.

I hope this is not the solution. With XP Home Edition the Administrator account is only accessible in safe mode. Has anyone installed 8.1.2 on a XP Home Edition OS?

OK, I finally have run into this problem too. Cleaned registry, deleted all Geovision files, ran CCleaner and logged in as Admin. When I run 8.1.2 installation nothing happens. I'm not sure if the "passdll" fix is applicable to this. Any ideas?

Video output from the DSP to a CRT will look exactly like the output of the camera.

CRT if you have the space.

Or you can try the Affinity Digital Modulation Kit and not have to eliminate any channels.

Computar VM300

Quality outdoor sensors: http://www.takex.com/productSub.php?tgid=3&gid=3.4 You can mount a camera in this one: http://www.protechusa.com/XLV-SpecSheet.asp This one just looks cool: http://www.protechusa.com/EX-SpecSheet.asp

Damm Rory you have been busy. I haven’t been around in a while and I check in today to look up something and what do I find, a load of freebies! Good work " title="Applause" />

I know this is an old thread but, ispyvision how did the megapixel cameras work out with the NV6480Express card? I have been wanting to check this card out too.

Rory if you actually try anything from this company please let us know. I have used the Avermedia cards a few times as an alternative to Geo and I think they are as good or better in some areas. I have not tried any of the newer cards yet but they look compelling.