Jump to content

Smit9352

Members
  • Content Count

    268
  • Joined

  • Last visited

Everything posted by Smit9352

  1. Smit9352

    OPTION AVAILABLE OR NOT

    Which DVR are you referring to?
  2. Smit9352

    Hi, Uk here

    Welcome aboard!!! I'm very very new here myself but I think I'm fitting in... TSCM ... What equipment do you do and what certifications did you have to get in order to become one! I've got a pretty good eye for cameras even when I'm not looking for them tho, so this does not sound like it would be a horrible profession eh! Welcome
  3. Are the Eagle items proprietary to the Eagle software? If not, will it operate on a standard protocol like Pelco or Lilin? If it isn't proprietary then look at Vivotek to see if you could use their VS7100 units. Thanks, John
  4. Smit9352

    Baluns

    The last 3 applications where I used video balluns I did it all within just one cat-5 cable. I ran the entire cable all the way to the end to the last camera and took 2 wires out and ran them to my ballun. Then went back to the 3rd camera and did the same then to the 2nd and finally the 1st. This was a very short run (by short I mean less than 400ft) and it is still functioning properly even after 11months so far. Goodluck! Thanks, John
  5. Smit9352

    know anything about this camera??

    A DVR card would be better if you don't have the spare room for a dvr and already have a rather newer computer that you could install the DVR card in. If you're looking for a DVR we have a few here at our office if you want to pm me for any specifics you're looking for (price range / functions) and I'll show you what we have here. Image Sensor 1/3" Sony color CCD Resolution 480 TV Lines Minimum Illumination 0 Lux Lens Furnished 6mm Power Supply 12V DC Power Consumption 100mA S/N ratio: More than 48dB IR Wavelength 24 unit 850nm Lifetime 100000 hours IR Distance 75 - 105' _____________________________________________________ OR Image Sensor 1/3" Sony High Resolution ExView CCD Resolution 420 TV Lines Minimum Illumination 0.01 Lux/F2.0 Lens Furnished F3.6mm @f2.0 Power Supply 12V DC Power Consumption 110mA Electronic Shutter 1/60 (1/50) to 1/100,000 sec. Video Output 1 Vp-p / 75 Ohms. S/N ratio More than 46dB Scanning System Interlace 2:1 _____________________________________________________ I'd recommend to pickup 4 small Non-IR cameras tho if you are going to have flood lights or if street lights are going to be close to the cameras locations. Most DVR's now have CD backup (or at least usb) and remote networking so you can view it from any windows based PC away from your home. Also motion detection is definately now commonplace as well as MPEG4 compression for the video. Are there any other functions your looking for specifically? Also what's the budget? Thanks, John
  6. What about this? Image Sensor 1/4" CCD Image Sensor Resolution 480 TV Lines Minimum Illumination 0.3 lux F1.2, 0 lux (IR ON) Lens Furnished 4.3mm F1.8 Power Supply 12V DC Power Consumption 90mA Electronic Shutter (NTSC):1/60-1/120,000sec Auto Gain Control Yes Sync System Internal Video Output 1.0 Vp-p composite video at 75 ohm Scanning System (NTSC): 525 lines, 60 fields Operation Temperature: -20°C to 50°C CCD Effective Pixels: (NTSC): 771(H) x 492(V) S/N Ratio: Better than 56dB (AGC OFF) White Balance: Auto (3200-10000°K) (Zero color rolling) Gamma Correction: 0.45 Construction: Aluminum, with light gray anodized finish Water Resistance: IP 68 IR LED: 12 unit 840nM LED, DC 12V 180mA, 6000hrs IR Distance: 10 Meter, View Angle: 70°, Beam Spread: 30°
  7. Smart move! Best thing I've come up with so far is I get whichever mount I'm using on the pole (typically a band clamp mount) and I'll try to find a very thin sheet of rubber and wrap it around the pole where the bracket touches. Another option would be uhm... use some rubber washers or maybe grommets to ensure that the metal from the camera is not touching the metal of the pole. Thanks, John
  8. Smit9352

    Name: John

    Hello, My name is John and I work for a Surveillance Company based out of Louisiana and have for almost 4yrs. I just wanted to chime in and say hello to everyone and hope to get a warm welcome. If anyones looking for anything please let me know and I'll be happy to try and help! Thanks, John
  9. Smit9352

    hi end dome camera mount

    CCTV Imports sell the same thing oddly enough I seen, I've used them myself in a couple applications and there still working just fine after about 1 1/2 years now. Definitely a great camera! Good luck with them, John
  10. I've been using glow rods as well... Maybe this "gun" thing isn't such a bad idea huh Scorpion? Ha ha
  11. Smit9352

    know anything about this camera??

    Are you looking to try and do a stand-alone dvr for your application or were you more or less looking for just a quad/switcher (will not record). I'd definitely look for a stand-alone dvr if I were in your position and the cameras are there any specific color exterior you'd like to find or does it not matter? Shoot me back,
×