Jump to content

kalpesh_nikumbh

Members
 View Profile  See their activity

  • Content Count

    159

  • Joined

  • Last visited

Posts posted by kalpesh_nikumbh

  3. Posted

    your question is very confusing dear!!

     

    you said you have 8 ch DVR....then said VGA out ..SPOT Out ..then sequential..etc.. it all together ?????

     

    1. You have 2 page QUOD processor?? ( Analog system)

     

    SOme Facts to highlight about Analog systems..

     

    Switcher is one which produces sequential o/p thro' BNC connector

     

    Next is QUAD Processor… it has screen divided in 4 ; so could view 4 cams simultaneously….( some good QUAD have some Picture in Picture etc. features )

    Followed by 2 page 8 channel QUOD Processor

     

    Then comes Multiplexers: - with 4, 9, 16 Ch with 2x2, 3x3, 4x4 screens; Main & SPOT Outputs

    Here default programming is Mains o/p gives divided screen, single camera view etc. while SPOT o/p have default setting of sequential o/p where in individual cam’s viewing time can be adjusted…it can be 0 sec.s also (i.e. skip view)

     

    In DVRs both BNC & VGA O/P are available but only one can be used at a time (selected by some dip setting)

    The same O/P Can be used for 2x2 screen or even sequential………

     

    Here I suggest …

    1. Mark the Channel as “ Not used “ instead it shows video Loss then your sequence will automatically skip it….

    2. Remove camera from the sequence thro’ the setup..

    3. if such facility is not there …Make the camera view time zero in the sequence……

     

    Further any query …you can revert with the operation manual

     

    Good Luck

     

    Kalpesh Nikumbh

  4. Posted

    Hi Avinash

    Good Morning!! & Welcome to the Forum!!

     

    Some Point would like to Highlight

    1. In case of digit Cameras (IP) no matter it’s PAL or NTSC…

    2. It is possible to go beyond 25 fps & 30 fps …

    3. You must be comparing the Interlaced scanning technique where in fps depend on frequency of the main power supply (50Hz / 60 Hz )

    4. If the scanning technique is “ Progressive Scan “ then there is no limitation ..here entire picture is scanned in one shoot..

    5. then the fps will be totally software based!!

    6. If your application has still images only with very slow motions , just normal surveillance …no matter about fps and scanning techniques….it affects when you r watching recordings of Highly motioned images s.a. highways etc.

    7. As said by previous friend …yes for normal surveillance 5-15 fps is OK. Our eye can sense on 18 fps!!!!!

    8. But in case of analyzing the Recorded images for threat …all these goodness of cameras come in to the picture!!!! used in Military surveillance

     

    AXIS 221 has really good features…but examine your application first… whether you need really such good ?

     

    Very good technical info is available on AXIS website …you can go thro’ it!!

     

    Good Luck

     

    Kalpesh Nikumbh

     

    Mumbai India

  6. Posted

    Hi!!

     

    You Should specify the model /make atleast...

     

    there are 10 thousand speed domes available in the world..and hundred methods to control!!!

     

     

    Was you controlling it previously?? and sudenly lost control??

    Else Must be in Auto Mode by default...

    What is the connection bet the Cam & Keyboard / DVR??

     

    Any controls buttens available on the dome??..check d manul..else come with details ...then only we can help!!

     

    Regards

     

    Kalpesh Nikumbh

    India

  10. Posted

    Fact about 225FD..

     

    This is not a Pan Tilt Camera Dear!!

    It's a Fixed IP66 Outdoor Dome Camera

     

    For sea port..you should go with AXIS233D ( pls. select exact model depending on NTSC/PAL system)

     

    It has real beauty in it..

     

    Equiped with 360deg PAN, 180deg tilt 35x Zoom true day night etc...

     

    it gives 4 CIF resolution...when why go for megapixel?? they don't give good images in low light conditions & consumes extremly high bandwidth!!

     

    http://www.axis.com/products/cam_233d/index.htm

     

    you have to go with separate IP66 housing ...

    AXIS do have it...but is very expensive ( is not so gr8) ...try using samsung / honeywell Housing with small modifications!!! is comparely cheeper!!!

     

    Regards,

     

    Kalpesh Nikumbh

    India

  13. Posted

    Ya!!

     

    Go to google

    serch >> free DNS service

     

    you will get plenty of such services which provide such connectivity!!

     

    Some DVRS have Remove viewing softwares to view them over internet!!

     

    We can guide you on that if you can share the Exact model no of the DVR

     

    Good LucK!!

     

    Kalpesh Nikumbh

     

    India

  14. Posted

    Ya!!

     

    Thus ...how so ever these guys says they have open platform and all........

     

    everything happens with business prospectives!!!

     

    There is no std.s followed universally....

    everybody want there system properitory...so that next business should come to them only!!

     

    Have any heard about any such Standerdisation ??

     

    Regards,

     

    Kalpesh Nikumbh

    India

  16. Posted

    Thank Good !!

     

    You saved me Thomos!!

     

    I m not in marketing dept...

    M pure Techy guy.....

    & what i mentioned was not a sales talk................

     

    true !! there is no standered ( i.e. may called open std. ) in IP

    They comes with web browser facility hence one can surf it like a normal web page!!!

     

    i never insist on any product!! thats onces choice altogether!! depenging upon Budget , technology etc...

    Kalpesh

    India

  17. Posted

    Hi !

     

    You can keep Your Analog Cams Platform & IP Camers platform separete !!

     

    Same practice is adopted here also...since IP cameras are new trend here we can eazily done that!!!

     

    In this case you donot have to stuck and let any manufacturer rule you!!!

     

     

    IP is open platform systems what i belive !! Some Good software available in the market supports all major brands of IP cameras and there model!! such as Milestone , NUUO etc...

     

    Great about AXIS is they have Open API...so you can develop your own sofware also

     

    Regards,

     

    Kalpesh

    India

  19. Posted

    Some Fact about Wireless Cameras!!!

     

    There performance depends more on The receiver used to collect the signal....

     

    I personally used AXIS 207W with a good Wifi Receiver ( having 12 small small antennas ) and could logged on to the camera thro' 6 walls !!!!!

     

    receiver tested by me was designed by : convergentindia

     

    the same with just another cheeper recever ....was just could manage thro' line of sight.......

     

    other problems may be model specific!!

     

    My only warry about AXIS is the prices...

  20. Posted

    Yes!!

    Considering all these facts ( mentioned in detail by thomas ) ....

    I write my Suggestion to directly Contact NUUO ...if NUUO is the only option left behind!!!

     

    About China Market ..yes! it's alwyas a risk factor........

    In india , our market is most influenced with China product just because o f the cheepest product with all decto featurs of famous brand!!!

     

    I am even surprise to find so many New brands people talk about on this forum

     

    Yes...lead time of such development is around 1 day to some 2-3 months!!!

     

    I remeber we have done one small AXIS camera integration with our access software in 1 days time...

     

    But do not disappoint ...JUst do it man...let conditions decide the success!!!

     

    Kalpesh Nikumbh

     

    India

  21. Posted

    Hi,

    Good morning!!

     

    NUUO support major brands with there major models...

     

    I don't think they will charge you for adding your camera in there list!!

     

    Only you have to share your API with them...and your system should have that much share in the market!!

     

    If that Europion customer has a global precence ; you can approch NUUO that way also...

     

    certainly it's a bussiness deal....you have to directly spk. to them...

     

    and should commit certain bussinesss terms and all...

     

    i m don't aware of much about this comercials since i m into technical part only at my organisation..

     

    good luck!!

     

    Kalpesh Nikumbh

     

    India

  22. Posted

    If it is 24 V ac then it's ok....

    no problem dear!!!

     

    I also utilised such spare cables while no chose left behind during maintainanace of some old dirty installations..........

     

    if it is cabling phase of the project......recommanding higher gause cable!!

     

    Just do it !! Good luck....

     

    Kalpesh Nikumbh

     

    India

×