prsmith777 0 Posted June 14, 2008 I have two GV 2008s on a new built box and all has been running well for a few weeks. I decided to try the DSP out and I can only get 8 channels from each card. I was hoping to have the master card output 16 channels on the one RCA out plug instead of having two cables. Is this possible? If not how can I have all 16 channels input to my cable tv? will a splitter work? Thanks Share this post Link to post Share on other sites
prsmith777 0 Posted June 14, 2008 OK I tried a y splitter from both rca out to one input on the monitor and it is all messed up.... that doesnt work Share this post Link to post Share on other sites
prsmith777 0 Posted June 14, 2008 each dsp seems to work independently. Looks like Ill need a videomodulator to distribute throughout the house.... oh well Share this post Link to post Share on other sites
andy_geovision 0 Posted June 26, 2008 Dear Prsmith777, If you have 2 gv2008 cards in a PC, you will need to have a 6 pin cable to connect 1st GV 2008 card and 2nd GV 2008 card together. In this way, you can see all 16 channels in the first GV 2008 card's TV out function. Please check the Installation Guide 8.2 Page 4-5. Any questions, please let me know. Sincerely, ----------------------------------------- Andy Chen Technical Support GeoVision. Inc. +886-2-8797-8377 extension 287 Share this post Link to post Share on other sites
prsmith777 0 Posted June 27, 2008 I do have the cable connecting the two cards. Maybe I have it connected wrong. I fiddle with it. I thought the cable was to allow all 16 cameras to work on the dvr software. Share this post Link to post Share on other sites
prsmith777 0 Posted June 7, 2011 I realize this is 3 years old. But I recently tried to get this to work again and cant seem to get it working right. I have tried putting the 6 pin cable in all different combinations to connect the 2 gv-2008 cards and still I cant seem to get 16 cameras to output through one card for the TV out. Andy, if you are still here, please help. Share this post Link to post Share on other sites
prsmith777 0 Posted June 15, 2011 Turns out my cable was bad. Share this post Link to post Share on other sites
Adam Daley 0 Posted June 21, 2011 Will this method work with say 2 1120-16 cards? So i could have one RCA out into my TV and show 32 cameras??? Share this post Link to post Share on other sites
prsmith777 0 Posted June 23, 2011 You would think. I am not familiar with that card, however, so I cant help you. Perhaps the manual? Share this post Link to post Share on other sites
