dinster 0 Posted June 12, 2009 i have Panasonic WV860G PTZ analog camera. in the midst of doing some troubleshooting. when i powered it up and hooked it to TV via direct coaxial cable - video is produced. however the PTZ motor keeps on running from left to right, and from right to left non stop... is it normal ????? Share this post Link to post Share on other sites
Michelangelo 0 Posted June 12, 2009 If its brand new it´s not normal. If it´s old and you got it from someone else they probably have a shadow tour programmed that was running when it was powered off. Share this post Link to post Share on other sites
dinster 0 Posted June 12, 2009 If its brand new it´s not normal. If it´s old and you got it from someone else they probably have a shadow tour programmed that was running when it was powered off. dear sir this is our own unit - old stuff. we dont have any pre-program for this PTZ. it was being used mainly for monitoring. pls advise. Share this post Link to post Share on other sites
Soundy 1 Posted June 12, 2009 If you can get into the on-board programming menu, you should be able do a soft reset of all the camera options. I agree with Michelangelo, if the video is steady and it's just going back and forth in a steady path, it's probably running some auto-scan program. Share this post Link to post Share on other sites
