K-J 0 Posted July 8, 2009 hi, i need an advise, i have a geovision 1480 card and i want to control at least 3 ptz cameras, what do i need to do it. Share this post Link to post Share on other sites
shentim 0 Posted July 9, 2009 Hi, You would need to use a GV Net card or GV Net I/O card to provide the connection to your PTZ cameras: http://www.geovision.com.tw/english/3_1.asp?stable1=Pro&sfiled=pgid&pno=13 Hope this helps! Share this post Link to post Share on other sites
K-J 0 Posted July 9, 2009 thanks for the reply, but wich one would work for 3 ptz? because in the geovision web site the info is not clear enough. Share this post Link to post Share on other sites
shentim 0 Posted July 10, 2009 Hi, Use the GV-Net I/O card - it offers 4 inputs and 4 outputs. Please check the installation guide and also with our tech support department's live chat, available between 9:00AM - 5:30PM PST at www.usavisionsys.com if you would like further technical assistance. Share this post Link to post Share on other sites
