Jump to content
hargan

2 x NV6480 fps questions

Recommended Posts

Hi all!

My boss wants to buy 2xNV6480 for his new shop cctv's. I must install all and I have 2 questions for any expert online (or anyone that know the answer ):

- with i7 cpu can I record mpg video on motion detect of all 32 pal analog cams at 640x480@25fps for each cam?

- in the same system, at the same time, can I connect through internet explorer 3/4 clients to an imatrix server to view 16 cams to one screen in real-time 25fps each cam?

Thanks in advance to all for your invaluable help.

Share this post


Link to post
Share on other sites

Hi all!

My boss wants to buy 2xNV6480 for his new shop cctv's. I must install all and I have 2 questions for any expert online (or anyone that know the answer ):

- with i7 cpu can I record mpg video on motion detect of all 32 pal analog cams at 640x480@25fps for each cam?

- in the same system, at the same time, can I connect through internet explorer 3/4 clients to an imatrix server to view 16 cams to one screen in real-time 25fps each cam?

Thanks in advance to all for your invaluable help.

 

 

to use the 6480 cards you need a high spec pc. Intel Cor 2 Duo processor but you dont need to run at 25fps 12 or 15fps is just as good. you can use imatrix for off site but cms3000 gives you more options. but you will not get 25fps over the internet. also H/D storage for 32 cameras. how many days storage are you looking for ???

Share this post


Link to post
Share on other sites

Yes, with i7 process you should get 640x480... recently i have sold many NV8416 DVR and that DVR card will give you Full D1 720x480 with i7 Processor... I really like this new card if you have the budget. NV6480 are also very nice DVR card and we have setup few hunderds of those boards so far...

Share this post


Link to post
Share on other sites

Thanks for your attention.

In our budget we will buy an Intel i7 cpu with 4TB of storage to record about 30 days / 11 hours a day only in motion detect.

My boss wants to record all 32 cams at 640x480@25fps mpeg and it seems possible (http://www.avermedia.com/AVerDiGi/Product/Detail.aspx?id=133)... is it right? it is very important 25fps for him...

For view in internet explorer (or if you think better with 3/4 imatrix...) I mean in local area network with gigabit connection (not over internet)... 3/4 different windows pc clients at same time with 16 cams a screen in real time 640x480@25fps for each cam?

I know in his mind he imagines it like a big brother

...by the way... thanks...thanks...thanks a lot for your reply.

Share this post


Link to post
Share on other sites
Thanks for your attention.

In our budget we will buy an Intel i7 cpu with 4TB of storage to record about 30 days / 11 hours a day only in motion detect.

My boss wants to record all 32 cams at 640x480@25fps mpeg and it seems possible (http://www.avermedia.com/AVerDiGi/Product/Detail.aspx?id=133)... is it right? it is very important 25fps for him...

For view in internet explorer (or if you think better with 3/4 imatrix...) I mean in local area network with gigabit connection (not over internet)... 3/4 different windows pc clients at same time with 16 cams a screen in real time 640x480@25fps for each cam?

I know in his mind he imagines it like a big brother

...by the way... thanks...thanks...thanks a lot for your reply.

 

 

Hi hargan. what will you be protecting with your system. there are not many places that need 25fps only like casino tables and even then they can use just 15fps.

 

over lan you will get 15fps i have sent you a pm with video of fps that you can play and alter.

Share this post


Link to post
Share on other sites

Hi tomcctv.

I've seen your videos, they are fantastics.

I am going to protect only a general shop of all office products... but unfortunately I've to record @25fps cause my boss pay and make the law.

May I use the 2 tv-out of the 2 nv6480 to see in real time 16 cams each tv?

+ imatrix for other 2 lan clients...

Thanks for your help.

Share this post


Link to post
Share on other sites
Hi tomcctv.

I've seen your videos, they are fantastics.

I am going to protect only a general shop of all office products... but unfortunately I've to record @25fps cause my boss pay and make the law.

May I use the 2 tv-out of the 2 nv6480 to see in real time 16 cams each tv?

+ imatrix for other 2 lan clients...

Thanks for your help.

 

at 25fps at that res you are going to need 8/9tb so you are going to need raid for 30 days

 

with cards you are a bit limited i.e 1 vga out and 2 tv out (you have no control over the tv out display)

if you are looking at macking a video wall then i would look at the avermedia 6032e no need to use imetrix then.

and added to the cms3000 software even more screens with full control and alarms.

but with buying avermedia you are missing out on not using some ip camerasin your key areas

Share this post


Link to post
Share on other sites

Hi again sajaan458 & tomcctv.

We've just buied 2 x nv8416e4 (I will receive it in a month). As you know, how many analog tv-out can I use at same time for real-time view with 2 nv8416?

Thank a lot.

Share this post


Link to post
Share on other sites
Hi again sajaan458 & tomcctv.

We've just buied 2 x nv8416e4 (I will receive it in a month). As you know, how many analog tv-out can I use at same time for real-time view with 2 nv8416?

Thank a lot.

 

a month. you need to change your supplier. how long do they take for tech support. so you have gone for the new NV8416e4. then this gives you more options as it does not have a tv out.

 

 

Advanced VGA Spot Monitor Output

1, Configurable multi-quad VGA spot monitor output

2, Flexible 1, 4, 8, 9, 13, and 16 split VGA output video on your demand

3, Unique hybrid VGA spot monitor output

4, Support IP camera or Analog camera VGA output

5, Integrated spot monitor output with alarm system

6, Configurable spot monitor output to serve as an alarm action

7, Compatible with AVerDiGi Display21 for multi-quad and

alarm spot monitor output

8, 5 configurable multi-quad spot monitor TV output

9, 16 loop-through spot monitor TV output

Share this post


Link to post
Share on other sites

Thank tomcctv.

I have buied at bhphotovideo.com... also if i live in italy... and i had paied $ 2.362,20 for 2 nv8416e4 and shipping cost.

 

So now I need to understand how to cable our new shop under construction.

I will install DVR server in a rack and from here I need to send to 2-3 LCD-TV 32" "video signal" to view 16 cams each TV in real time if is possible. I can't buy display21 or cm3000 cause my budget is at the end What do you think... I need 1 PC with a graphic card with 2 hdmi out with imatrix for 2 TV-LCD and another PC with hdmi out with web view for third LCD-TV... is it right? How about fps? Do you suggest another better solution without buy anything?

Thanks a lot.

Share this post


Link to post
Share on other sites
Thank tomcctv.

I have buied at bhphotovideo.com... also if i live in italy... and i had paied $ 2.362,20 for 2 nv8416e4 and shipping cost.

 

So now I need to understand how to cable our new shop under construction.

I will install DVR server in a rack and from here I need to send to 2-3 LCD-TV 32" "video signal" to view 16 cams each TV in real time if is possible. I can't buy display21 or cm3000 cause my budget is at the end What do you think... I need 1 PC with a graphic card with 2 hdmi out with imatrix for 2 TV-LCD and another PC with hdmi out with web view for third LCD-TV... is it right? How about fps? Do you suggest another better solution without buy anything?

Thanks a lot.

 

 

Hargan. did you read on the site you have posted. NOT IN STOCK. italy from the uk 3 days.

 

cms 3000 comes with the cards Free it comes with every avermedia. you only need 1 pc the one you are putting the cards into along with a graphics card. how many monitors are you using.

Share this post


Link to post
Share on other sites

Yes Tom I have read, they say that they need order the card and then shipping. For me it's ok.

For the same 2 card in Italy I must pay USD 4.755,00 (VAT included).

 

Good news for CMS3000 free. I need 3 different LCD-TV to view 16 cams each TV.

Do you also know an intel X58 motherboard with 2 x pci-x4?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×