Jump to content

Recommended Posts

So, looking to fiddle with some LPR stuff and wondering if there's any (preferably open-source or free-demo) software out there than can run independently of the NVR and work with a variety of IP cams or even an MJPEG or H.264 stream? If it can write to a database or output to a text file, that's even better, but mostly just wanting to play with the recognize/OCR side of things...

Share this post


Link to post
Share on other sites

Thanks... I tried Google and the only thing I found that wasn't a hideously expensive complete system was supposed to be a demo of some commercial package, but I couldn't find the actual demo download. Guess my Google-fu is weak today.

Share this post


Link to post
Share on other sites

Hi there, just to give this thread a "bump"...

 

Is there any reasonably priced, standalone LPR software on the market?

I am not a programmer to implement SDK into anything. Just something that works and doesn't cost an arm and a leg?

Cheers.

Share this post


Link to post
Share on other sites
Hi there, just to give this thread a "bump"...

 

Is there any reasonably priced, standalone LPR software on the market?

I am not a programmer to implement SDK into anything. Just something that works and doesn't cost an arm and a leg?

Cheers.

Maybe this?

http://www.warelogic.com

Share this post


Link to post
Share on other sites
Hi there, just to give this thread a "bump"...

 

Is there any reasonably priced, standalone LPR software on the market?

I am not a programmer to implement SDK into anything. Just something that works and doesn't cost an arm and a leg?

Cheers.

Maybe this?

http://www.warelogic.com

 

 

Hi rory,

they don't have Australia and I wouldn't have a clue how to work with a SDK...

Thanks anyway

Share this post


Link to post
Share on other sites

 

Hi riluxg,

I love this price tag

I'll give it a try. Thank you very much for this.

Update:

I tried the software but with LPR it crashed all the time. Also it did not detect the cameras via my Geovision card.

I tried it via desktop monitoring when it crashed. Otherwise it looks like an easy interface.

 

 

BTW

Is it possible with a LPR software to connect 2 or 3 cameras instead of a single one to get a better recognition of the same car at the same time?

Share this post


Link to post
Share on other sites
Also it did not detect the cameras via my Geovision card.

It wont work with your Geovision card, at least not using GeoVision's drivers.

You would need to totally get rid of Geo and its drivers and install BT drivers, but even then if you are lucky enough to have a card that will work with those (not a Combo card for example), it will still only work with 1 channel at a time (normally).

 

You would be best buying a capture card specifically for LPR, GeoVision will be one of the hardest to get to work outside of the GeoVision software.

Share this post


Link to post
Share on other sites
So, looking to fiddle with some LPR stuff and wondering if there's any (preferably open-source or free-demo) software out there than can run independently of the NVR and work with a variety of IP cams or even an MJPEG or H.264 stream?

 

few links for you

not free but ...

 

Adaptive Recognition Hungary (Budapest Hungary)

AITEK Srl (Genova Italy)

Asia Vision Technology Ltd. (Kowlong Tong Hong Kong)

AutoVu Technologies, Inc. (Montréal, Québec Canada)

Belgian Advanced Technology Systems sa (Angleurr Belgium)

Blaze Imaging Ltd. (Livingston Scotland)

Codic Ltd. (Barcelona Spain)

Computer Recognition Systems, Inc. (Cambridge, MA US)

Electronic Control Measurement, Inc. (Manor, TX US)

Elettronica Santerno SpA (Bologna Italy)

ELIOP Tráfico SA (Madrid Spain)

Fraunhofer-Institute (Berlin Germany)

Hi-Tech Solutions Ltd. (Migdal-Haemek Israel)

IDVehicle.com (Lexington, MA US)

Kent Ridge Digital Labs (Singapore)

Lockheed Martin IMS (San Diego, CA US)

MAZ Hamburg GmbH (Hamburg Germany)

Micro Design ASA (Trondheim Norway)

Monitron International Ltd. (Kidderminster, Worcester UK)

Neurotechnologija Ltd. (Vilnius Lithuania)

Non-Cooperative Target Recognition Ltd. (Cambridge, Cambridgeshire UK)

OMRON Corporation (Tokyo Japan)

Optasia Systems Pte Ltd. (Singapore)

 

U want more ?

Share this post


Link to post
Share on other sites
So, looking to fiddle with some LPR stuff and wondering if there's any (preferably open-source or free-demo) software out there than can run independently of the NVR and work with a variety of IP cams or even an MJPEG or H.264 stream?

 

few links for you

not free but ...

 

Adaptive Recognition Hungary (Budapest Hungary)

AITEK Srl (Genova Italy)

Asia Vision Technology Ltd. (Kowlong Tong Hong Kong)

AutoVu Technologies, Inc. (Montréal, Québec Canada)

Belgian Advanced Technology Systems sa (Angleurr Belgium)

Blaze Imaging Ltd. (Livingston Scotland)

Codic Ltd. (Barcelona Spain)

Computer Recognition Systems, Inc. (Cambridge, MA US)

Electronic Control Measurement, Inc. (Manor, TX US)

Elettronica Santerno SpA (Bologna Italy)

ELIOP Tráfico SA (Madrid Spain)

Fraunhofer-Institute (Berlin Germany)

Hi-Tech Solutions Ltd. (Migdal-Haemek Israel)

IDVehicle.com (Lexington, MA US)

Kent Ridge Digital Labs (Singapore)

Lockheed Martin IMS (San Diego, CA US)

MAZ Hamburg GmbH (Hamburg Germany)

Micro Design ASA (Trondheim Norway)

Monitron International Ltd. (Kidderminster, Worcester UK)

Neurotechnologija Ltd. (Vilnius Lithuania)

Non-Cooperative Target Recognition Ltd. (Cambridge, Cambridgeshire UK)

OMRON Corporation (Tokyo Japan)

Optasia Systems Pte Ltd. (Singapore)

 

U want more ?

 

I tried a few. Nothing below a $1000 (Optasia $10,000). Thanks!

YES, ME WANT MORE...at a better price, please.

Share this post


Link to post
Share on other sites

Any tips on what to download, how to compile it (I currently don't have a C compiler on my Windows PC).

 

Did you use the CLI to run it or wrote your own app calling the API. I'm not a C developer, but maybe I can develop a vb app around it if it's possible.

Share this post


Link to post
Share on other sites

Well, I had to get a Linux machine setup to get it compiled. I'm not a Linux guru, so that's probably what was the most difficult thing. But I know a little C++.

 

I'm just using the CLI app after I got it compiled. I wrote a small Python script that listens to web requests and then calls the command line to analyze the plate image.

 

You can download it from GitHub https://github.com/openalpr/openalpr

 

You need "git" installed to download it.

 

I'm not sure if it will run on Windows... I haven't tried it.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×