Jump to content
Jeremy Barrow

Handy Viewer on Aver Nano

Recommended Posts

Hi Guys,

 

Hope someone can help me here - newbie on the forum obviously, but I've used an AVer SA Series DVR for many years.

 

I've Just swapped an SA5000 for an EH-1008 Nano because the Nano appeared to do all that the SA did, but in a much smaller and energy efficient package.

 

The problem is I use Handy Viewer to integrate the cameras with touchpanels on a Crestron system, but I can't find any way to either configure or access Handy Viewer on the Nano.

 

The instruction manual states that you simply access http:///mobile as you would with the SA and any other AVer but that doesn't work.

 

Can anyone shed any light on using Handy Viewer on a Nano and if anyone has managed to do it, can you tell me the firmware version please,

 

Many Thanks

Jez

Share this post


Link to post
Share on other sites

The instruction manual states that you simply access http:///mobile as you would with the SA and any other AVer but that doesn't work

 

 

 

hi yes your are a port number short you need http://ip-address:5550/mobile (this is only used to test viewer)

 

 

but this will only give you still java refresh images. so you are best with Http:ip-address:5550

Share this post


Link to post
Share on other sites

Thanks for the quick reply -

 

Sorry, I should have explained - my ports are as follows:

 

Remote Console Port: 5550

WebViewer Port: 300 (changed so I don't have port 80 open on my firewall)

 

If I go to http://:5550 or http://:300 I get WebViewer as expected.

 

If I go to http://:5550/mobile or http://:300/mobile there's nothing there.

 

What's puzzling is that on the SA there's an option to activate/deactivate Handy Viewer and set the jpg resolution, but the Nano doesn't have this option in setup.

 

It's these still jpg images that I need for Crestron integration,

 

Jez

Share this post


Link to post
Share on other sites
http://:5550/mobile

 

 

 

hi. adding mobile at the end will only give you a still image. it is only a test on all avermedias. what are you logging in from pc/mobile ???

Share this post


Link to post
Share on other sites

That's exactly what I need -

 

On the SA, using /mobile gives you "Handy Viewer" which then allows you to select still images from each camera.

 

This is for logging in via a bog standard mobile phone.

Share this post


Link to post
Share on other sites
That's exactly what I need -

 

On the SA, using /mobile gives you "Handy Viewer" which then allows you to select still images from each camera.

 

This is for logging in via a bog standard mobile phone.

 

 

 

what mobile to you use ???? and ill creat a moving viewer for you

 

 

On the SA, using /mobile gives you "Handy Viewer"

 

 

this is not handy viewer. its just a java still image only used as a test screen to see if your mobile runs handy viewer.

 

handy viewer has PTZ controls and audio for all SA/NV/EB/SEB nano and touch.

Edited by Guest

Share this post


Link to post
Share on other sites

From the instruction manual:

 

Using HandyViewer to Access DVR Server

Users can use a mobile phone to access the DVR through Internet. Make sure your mobile phone support IE browser and is connected to the internet. To access the DVR server, open IE browser and enter http://enter server IP or domain name here/mobile. You can see the latest screen shot. Click << >> to change the channel or camera and Refresh to reload new screen shot.

 

 

This is what I have always understood "Handy Viewer" to be.

Share this post


Link to post
Share on other sites

this is aver mobile still image viewer only still image that you have to refresh all the time. no controls and no audio.

 

its just called avers java refresh. and you only get 1inch x 1 inch image.

 

http://demo1.cctvbuyers.com:5550/mobile/

 

 

 

this is what you need to see on your nokia screen http://demo1.cctvbuyers.com:5550/JAVA-Viewer.html

 

then you will see JAVA-Viewer.jar click on that to install icon in your mobil application screen and your done.

Share this post


Link to post
Share on other sites

this is aver mobile still image viewer only still image that you have to refresh all the time. no controls and no audio.

 

its just called avers java refresh. and you only get 1inch x 1 inch image.

 

http://demo1.cctvbuyers.com:5550/mobile/

 

Ok, this is EXACTLY what I need out of my Nano.

The reason is I need to provide the still jpgs to a Crestron Touch Panel which

then refreshes the jpgs every 100ms to provide a moving image.

 

So in your example above, the address I would use on the Touch Panel is:

 

http://demo1.cctvbuyers.com:5550/mobile/channel1.jpg

 

Then channel2, 3 etc for the rest.

 

However, I can't get the Nano to spit this out.

 

this is what you need to see on your nokia screen http://demo1.cctvbuyers.com:5550/JAVA-Viewer.html

 

then you will see JAVA-Viewer.jar click on that to install icon in your mobil application screen and your done.

 

I just used the Nokia as an example because that's the phone I used to test on.

 

So forgetting about Java-Viewer, and forgetting about the Nokia, I simply want to get the "test" jpgs as you call them out of the Nano so I can use them on the Crestron Touch Panel.

 

Does that make sense?

Share this post


Link to post
Share on other sites

Handy Viewer isn't Symbian based - It's very basic Javascript!

 

If you look at the code, it doesn't call any external scripts - it's fully self contained and only points to the jpgs, so if you drill to the URL of the jpg, it's not even javascript any more! It's simply a URL pointing at a jpg.

 

So we haven't got the answer of how do you activate Handy Viewer on a Nano?

Share this post


Link to post
Share on other sites
Handy Viewer

 

 

listen your post has got confusing as it is. you are not using handy viewer . this is handy viewer.

 

Fig6PDAViewer-1.jpg

 

 

it is software you download direct from the dvr as is remote viewer.

 

 

what you are asking for is still java images but you want to display more than 1 image at a time. then no you cant ip:550/mobile is just avermedias test and has been for 7 years.

Share this post


Link to post
Share on other sites

Sorry, yes, it has got rather confusing hasn't it?

 

Ok, what you've pictured is "PDAViewer" used on WinCE devices - PDAs and suchlike

 

"Handy Viewer" is the simple snapshot interface for mobile phones which only have an internet browser - for example the Nokia mentioned earlier.

 

As per the AVer manuals - and I quote:

 

"Using HandyViewer to Access DVR Server

Users can use a mobile phone to access the DVR through Internet. Make sure your mobile phone support IE browser and is connected to the internet. To access the DVR server, open IE browser and enter http://enter server IP or domain name here/mobile. You can see the latest screen shot. Click << >> to change the channel or camera and Refresh to reload new screen shot."

 

And that's all I'm trying to do!!

 

Ok - here's a snapshot from my SA DVR Handy Viewer - I just want to do this with the Nano.

Capture.JPG.1b11312f992a036f3e4e13634636f8c4.JPG

Share this post


Link to post
Share on other sites

does your screen have IE. ??

 

 

 

but even if you are trying to see images on your pc using http:// your local-ip:5550/mobile should work if not you have a port problem.

Share this post


Link to post
Share on other sites

It's a bit more complicated than that, but basically it pulls the jpgs from the DVR using the URLs of each channel's jpg.

 

The issue is that http://:5550/mobile is not a valid URL on the Nano and therefore cannot be viewed on a pc.

 

On the SA, you need to tick the Handy Viewer box in setup, but the Nano does not have such a box to tick!

 

This is a shot of the panel fed by the individual channel jpgs from the SA - excuse the fuzz, but I'd rather not have internal pics of the house on the 'net.

 

This works perfectly on the SA - the Crestron program refreshes the jpgs and so you get psuedo motion. I just want to replicate this using a Nano.

 

And this all just hinges on Handy Viewer working! ie /mobile

IMG_0132.JPG.73fd9de9a0c0ae58f9449ca5e1930814.JPG

Share this post


Link to post
Share on other sites
Cool! So there is hope!

 

Can you post that link?

 

 

 

the ip i had to get from a customer who has the nano so cant post. but the ip:5550/mobile is on every avermedia

Share this post


Link to post
Share on other sites
That's what I thought! But not on this Nano it would seem!

 

What firmware is your customer using?

 

 

 

hi i have been an aver dealer for 7 years. i was just going to ask what firmware do you have. in email alerts are your window (tick windows ) grayed out ???

 

 

can you pm me your supplier. dont list it on here. or how old is your nvr. am just waiting for an email to come back with another idea that may work from aver

Share this post


Link to post
Share on other sites
By the way, the "Send E-Mail" box in Alarms is not greyed out - I can set an email as long as I set up an alarm

 

 

 

that means you do have the latest firmware. EH100H-03.02.00.04 just sent pm

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×