Jump to content
krystol

Interlace images

Recommended Posts

I have been having quite a few issues with the camera “Back Door” below. It seems to only be this one camera. Originally I thought there was connector issue, however we changed out connectors tested the wire, changed ports on the DVR etc. I've recently changed the port on the DVR thinking it was a DVR issue, now I'm thinking its the actual camera. The camera will cut in and out and interlace images with the Driveway camera. Has anyone seen this before? Can anyone suggest anything else I should try?

 

Thanks

Camera.jpg.85cd144815f74cfd322fd4aa486e5690.jpg

Share this post


Link to post
Share on other sites

Probably the camera is bad and sending bad signals up to the DVR through the coax. Or some ground loop issue. something to that effect. We had the same problem and it was a camera that kept going out on us and it occasionally would show on another channel and also restart the DVR. As soon as I unplugged the camera, all was well.

Share this post


Link to post
Share on other sites
It seems like Power problem.

 

IR Cameras during night have more power consumption.

 

Check the Voltage on the Camera. If It is lees than 11,5V you have the reason for this problem.

 

Hello,

I think you point probably right but if it lower supply to the IR lamp I think will be worst in image. becasue it will not effect britter and darker blends. Typically, camera is geared to more wide range for power supply as we do it even lower 11V would not be that.

 

So maybe he could try ro switch his power supplier to proof it.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×