Jump to content

Recommended Posts


Regarding the new firmware, we have the Dahua 1.3 megapixel eyeball cams and bullets going to the

32 channel non-poe NVR with latest firmware in all items from Gen4. The puzzling issue is that motion detection in

camera has the new threshold and sensitivity features, and the NVR does not. Therefore if you set it in the

camera and then apply any setting under "detect" in NVR you will have changed everything in the camera.

Basically getting a continuous motion recording situation and ruining whatever patterns you have set up.

 

The new firmware in camera only gives 4 adjustable squares for motion detection areas, the NVR has anything

you want with only a global 1 to 5 sensitivity level. Therefore no meshing between camera and NVR. Has anyone

overcome this or is there new firmware for the NVR that has the new motion settings?

 

Also what would cause the cameras to change their profile schedule day/night back to full? Kinda a pisser to find all

your cameras on this job going back to color when you have set them to go black/white at night a week later randomly.

Clock is set in each camera properly with the correct time in each one. Seems like a bug to me, the mfg. has not helped

in any of the above issues.

 

Thoughts?

Share this post


Link to post
Share on other sites

I have problem, because I have the same software (2013-07-26) on my HDB3200C and HFW2100.

When I log in web browser (Mozilla and IE) on my HDB3200C all works fine.

But the problem is when I log in into HFW2100, I did not see any video. On Mozila have I info "the plugin is to old, or dosen't work". But why ? On 3200C work fine !!

Share this post


Link to post
Share on other sites

Hi.

I've tried these firmwares on my HDW2100 Pal camera:

- 2.100.0001.0.R build 20121031

- 2.210.0001.0.R build 20130517

- 2.211.0000.0.R build 20130726

but the it still doesn't upload to FTP! (both Motion video and Snapshots).

Any suggestion?

 

Anyway, the last WEB Version 3.2.1.128519 (firm 2.211.0000.0) works better on Apple Safari through NPMedia plugin but doesn't work on Mac Firefox.

 

(I'm sorry for my english).

Share this post


Link to post
Share on other sites
Hi.

I've tried these firmwares on my HDW2100 Pal camera:

- 2.100.0001.0.R build 20121031

- 2.210.0001.0.R build 20130517

- 2.211.0000.0.R build 20130726

but the it still doesn't upload to FTP! (both Motion video and Snapshots).

Any suggestion?

 

Anyway, the last WEB Version 3.2.1.128519 (firm 2.211.0000.0) works better on Apple Safari through NPMedia plugin but doesn't work on Mac Firefox.

 

(I'm sorry for my english).

 

Are you usind DD-Wrt's FTP server?

Share this post


Link to post
Share on other sites

Are you usind DD-Wrt's FTP server?

 

it is a ProFTPD server

 

Check the AllowOverwrite directive. It must be outside the directory you're writing to. Just add:

 

AllowOverwrite on

 

to the end of proftpd.conf and it should work. I faced the same problem with Proftpd from DD-Wrt.

Share this post


Link to post
Share on other sites

Hi sorry to disturb you guys

Anyone here knows where to download the latest firmware For Dahua DVRs without paying any money.

There is one in www.bahamassecurity.com which requires me to sign up for premium account to download.

 

looking for firmware models LEA, LEU y HET.

 

My current firmware that i have is General_DVRxx04LH-X_Eng_P_V2.608.0000.0.R.20120406.

 

Appreciate if you guy have the latest firmware.

 

Thanks.

Share this post


Link to post
Share on other sites

I have a Dahua IPC-HDB3200c and I use Ip Cam Viewer for Android to connect from my mobile.

If I connect with the Pc the connection is very fast, but with Ip Cam Viewer is very slow even if I'm connected with the wi-fi.

 

Which setting do you use with Ip Cam Viewer ?

Which bit rate do you setup on the camera ?

 

Thanks

andrea

Share this post


Link to post
Share on other sites

I just bought a Dahua ipc-hdb3200c dome camera. It has the following firmware on it -

 

2.103.0000.0.R, build : 2012-07-24

 

What firmware should I upgrade it to and where would I download it? I've looked through the thread but I wasn't sure.

 

Thanks for any help.

Share this post


Link to post
Share on other sites

Here's a post with a link for 20130517, NTSC version. I don't know if it works with the 4300 or not. There's also a 20130313 version. You can find links to various versions by searching the forum for 20130517 or 20130313.

 

viewtopic.php?f=19&t=33328&p=232953&hilit=20130517#p232953

 

Note that there's always a risk upgrading Dahua firmware, and their technical support is essentially non-existent. There's a reason the Dahua firmware thread is at 24 pages now...

Share this post


Link to post
Share on other sites

Here are a couple of versions of 20130517. All firmware updates are at your own risk, especially with Dahua. The version, PAL vs NTSC, is designated by the P or N after the ENG designator:

 

General_IPC-HX3(2)XXX_Eng_P_V2.210.0001.0.R.20130517.zip (PAL version, never used by me, full version with a bunch of files that you probably don't need unless you've got the mythical TFTP update working)

https://drive.google.com/file/d/0B5RXJz1sMJ9VcjVkbWlUeFpNYW8/edit?usp=sharing

 

General_IPC-HX3(2)XXX_Eng_N_V2.210.0001.0.R.20130517.bin (NTSC version, bin only, which is what you need, currently installed on my Dahua HFW2100N and HFW3300C cams)

https://drive.google.com/file/d/0B5RXJz1sMJ9VWll1eldiajFXZDQ/edit?usp=sharing

 

C'mon, Dahua, get it together!

Share this post


Link to post
Share on other sites

Don't you find it ironic that you are now asking others for firmware, but you refused to give the previous firmware you had to others ?

 

 

 

Has somebody got the 20130911 firmware?

Share this post


Link to post
Share on other sites

First time poster. This is a great resource.

 

I have a HDW2100 and a HDW3200S. Both NTSC.

 

The HDW2100 is 2.211.0000.0.R, build : 2013-07-26 and its interface is IP Camera.

 

The HDW3200S is 2.103.0002.0.R, build : 2013-03-13 and its interface is Web Service 3.0.

 

I'd like to get the HDW3200S to also use the newer IP Camera interface, but I read elsewhere that someone bricked their HDW3200S trying to upgrade to the 7-26 firmware.

 

Does anyone know the latest successful firmware upgrade available for the HDW3200S?

 

Thank you.

Share this post


Link to post
Share on other sites

The 2013-07-26 can be installed on both the 2100 and the 3200. I have installed it personally on both. I have also posted the firmware in this thread. Good luck.

 

 

 

First time poster. This is a great resource.

 

I have a HDW2100 and a HDW3200S. Both NTSC.

 

The HDW2100 is 2.211.0000.0.R, build : 2013-07-26 and its interface is IP Camera.

 

The HDW3200S is 2.103.0002.0.R, build : 2013-03-13 and its interface is Web Service 3.0.

 

I'd like to get the HDW3200S to also use the newer IP Camera interface, but I read elsewhere that someone bricked their HDW3200S trying to upgrade to the 7-26 firmware.

 

Does anyone know the latest successful firmware upgrade available for the HDW3200S?

 

Thank you.

Share this post


Link to post
Share on other sites

Thanks.

Any suggestions to minimize the potential for bricking?

Anything I can do in advance to undo a brick if it occurs?

Happy Hollidays.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×