Jump to content

Recommended Posts

Good news! With the help of HD Security Store, the vendor that sold me the Dahua camera, I was able to get the firmware updated. Here is what was needed:

 

In the config tool, when you select your particular camera and select the "Login" button, you're presented with IP Address, User Name, Password, and Port. By default, the port is populated with 37777. Simply change this to 3800, and Voila! The firmware installs correctly.

 

I don't know why this works. My camera itself has the TCP port set to 37777, but who cares why it works as long as it does.

 

I now have the General_IPC-HX5(4)XXX_Eng_N_Stream3_V2.420.0000.0.R.20140419 firmware running on my cameras. Nice!

 

If you order a Dahua on Amazon, be sure to choose HD Security Store as the seller. Their support makes it well worth it!

 

Isnt that what iTuneDVR said above?

Share this post


Link to post
Share on other sites

Good news! With the help of HD Security Store, the vendor that sold me the Dahua camera, I was able to get the firmware updated. Here is what was needed:

 

In the config tool, when you select your particular camera and select the "Login" button, you're presented with IP Address, User Name, Password, and Port. By default, the port is populated with 37777. Simply change this to 3800, and Voila! The firmware installs correctly.

 

I don't know why this works. My camera itself has the TCP port set to 37777, but who cares why it works as long as it does.

 

I now have the General_IPC-HX5(4)XXX_Eng_N_Stream3_V2.420.0000.0.R.20140419 firmware running on my cameras. Nice!

 

If you order a Dahua on Amazon, be sure to choose HD Security Store as the seller. Their support makes it well worth it!

 

Isnt that what iTuneDVR said above?

 

Yozh!

You are very attentive, and the previous author apparently not!

Just deja vu

Share this post


Link to post
Share on other sites

Pls help me find it: General_DVR21XX_Eng_P_V3.200 or General_DVR21XX_Eng_P_V2.616 is OK also. I need urgent. Thank so much for your helping.

Share this post


Link to post
Share on other sites

Hello All,

 

I have just received my Dahua rebrands and was wondering if anyone could help me to find the latest firmwares for them ?

 

The types I have are :

HDB3200CP

HFW3300P

 

I admit, I havn't struggled trough 40+ pages to find the latest versions, but it might be handy to either put a stiky post which is regulary updated, or to keep the first post up to date ?

 

Currently my HDB3200CP's are running the following :

 

Software Version2.420.0000.0.R, build : 2014-04-14

WEB Version3.2.1.183358

ONVIF Version2.4.1

 

In the meantime, I would be delighted to find the latest ones though !

Oh, I'm a Euro guy, so PAL would be preferred ....

 

Thanks a lot !

 

MaXX

Share this post


Link to post
Share on other sites

Hi everybody

I have problem need helping below: each times turn off the Modem internet, I must reboot DVR then can access from Mobile phone to see camera. My device is Dahua DVR2108C-W. Now i using FW: V3.200.0001.6

If anybody know, pls tell me how to do no need to reboot DVR after turn off Modem internet.

 

Thank so much.

Share this post


Link to post
Share on other sites

I'm having some problems with this video phone door system :

 

VTO6110B(outdoor) + VTO1210A-X(outdoor) => VTH1560B (indoor)

 

VTH1560B is running V1.100.0000.0.R.20131224

 

VTO1210A-X is running 2013-04-26 V1.110.0.0

 

VTO6110B is running 2014-06-23 V1.000.0.0 and 2013-04-26 V1.110.0.0

 

No matter which one is the setup as the Main_VTO, the VTO1210A-X sound is garbled. I figure it's a codec problem that would be easily solved with a firmware upgrade but I can't find one for them.

Share this post


Link to post
Share on other sites

Hi All,

This is my first post on this website.

I have a Dahua NVR3208V-P with Bios 2.610.000.6 build 2013-7-18 web: 2.3.7.2 net: 3.3.9.7930 playsdk: 3.32.0.7129 and I have problem with motion detection. I mean all working fine but I can't setup a sensitivity that mean I received a mail every few second.

I wondering if I can do update to newer firmware and this problem will be resolved.

What firmware I can try, I know there is a new one but I can't find where I can download it.

Thanks for your help.

Share this post


Link to post
Share on other sites

Hi there. My name is Rodrigo and I´m writing from Brazil.

 

I have already read and learned a lot with you guys....

 

I'm changing all my analog setup to IP. I already have a hybrid DVR/NVR that will be used to record network images.

 

I already have 3 Dahua HDW2100 (Dome). all of them updated to the last firmware 2.420.00000, build 2014-04-14. They are working fine.

 

Today arrived two HFW2100S (Bullet). on their bodies it´s written HFW2100S-V2-0360B. They came with Firmware 2.212.0000.1.R build 2014-02-12.

 

I'm having an issue that, no matter what I do, (Brazil time zone is GMT -3), after few minutes they change back to GMT +8 (China time?). ..... That happend with one of the domes, but when I updated it, it came back to real time.

 

These two bullets simply do not accept any other firm upgrade... have already tryed 2.210, 2.211, 2.420 ....

 

Does anybody have any idea and/or suggestion?

 

Rgds,

 

Rodrigo

Share this post


Link to post
Share on other sites
Hello All,

 

I have just received my Dahua rebrands and was wondering if anyone could help me to find the latest firmwares for them ?

 

The types I have are :

HDB3200CP

HFW3300P

 

I admit, I havn't struggled trough 40+ pages to find the latest versions, but it might be handy to either put a stiky post which is regulary updated, or to keep the first post up to date ?

 

Currently my HDB3200CP's are running the following :

 

Software Version2.420.0000.0.R, build : 2014-04-14

WEB Version3.2.1.183358

ONVIF Version2.4.1

 

In the meantime, I would be delighted to find the latest ones though !

Oh, I'm a Euro guy, so PAL would be preferred ....

 

Thanks a lot !

 

MaXX

 

Anyone have ntsc version of this firmware or latest for hfw3200?

Share this post


Link to post
Share on other sites

Hi team,

I recently bought a Dahua Camera IPC-HDW2100S but, surprisingly I received the -V2 version with Chinese Firmware.

Does anyone experience the same issue? Can anyone share the English Firmware for this camera?

Thanks,

Azzo

Share this post


Link to post
Share on other sites
Hallo,

 

i've been in the forums as a passive member for quite a while and now i like

to contribute some little information to this forum.

 

I noticed that with the v2.4x baseline firmware releases the well known

telnet access root/vizxv is gone

 

For me as a linux guy i wasn't happy with it at all so i took some

time to reverse enginieer the firmware of my HFW4200s camera.

 

I manage to analyse the telnet authorization

part in the firmware. The /etc/passwd is still the same so

the old password should work as always but the engineers

at dahua changed the authorization so this file is never read

for login. First i was able to patch the busybox binary to

accept any passwords but a couple of hours later i was

able to enter a valid password.

 

In fact the secret login/password consists of a valid

user with administrator privileges to the web interface

(e.g. admin) and a password with a 'secret' prefix.

 

Long story short as in my case with login 'admin' and password 'admin'

my telnet login is like this:

 

login: admin

password: 7ujMko0admin

 

So the prefix '7ujMko0' is the important part here.

 

Finally i'm able to telnet login to my cameras again

 

Can any of you double check on that?

 

Happy telnet login!

 

Regards,

 

hdo

hello

cam IPC-HFW2100

firmware 2.420.0000.0.R, build: 2014-04-14

how to find a prefix? that you have specified is not suitable

Share this post


Link to post
Share on other sites
Hallo,

 

i've been in the forums as a passive member for quite a while and now i like

to contribute some little information to this forum.

 

I noticed that with the v2.4x baseline firmware releases the well known

telnet access root/vizxv is gone

 

For me as a linux guy i wasn't happy with it at all so i took some

time to reverse enginieer the firmware of my HFW4200s camera.

 

I manage to analyse the telnet authorization

part in the firmware. The /etc/passwd is still the same so

the old password should work as always but the engineers

at dahua changed the authorization so this file is never read

for login. First i was able to patch the busybox binary to

accept any passwords but a couple of hours later i was

able to enter a valid password.

 

In fact the secret login/password consists of a valid

user with administrator privileges to the web interface

(e.g. admin) and a password with a 'secret' prefix.

 

Long story short as in my case with login 'admin' and password 'admin'

my telnet login is like this:

 

login: admin

password: 7ujMko0admin

 

So the prefix '7ujMko0' is the important part here.

 

Finally i'm able to telnet login to my cameras again

 

Can any of you double check on that?

 

Happy telnet login!

 

Regards,

 

hdo

hello

cam IPC-HFW2100

firmware 2.420.0000.0.R, build: 2014-04-14

how to find a prefix? that you have specified is not suitable

 

the prefix provided worked for my camera HFW3200

Share this post


Link to post
Share on other sites

Hi Everyone

 

Can any1 please send me the firmware for the dahua dvr 2116he the english pal version .

 

thx for your support

Share this post


Link to post
Share on other sites

Hi for all!!

 

How extract install.lua from firmware.bin (zip)? (i can see custom-x.cramfs.img, logo-x.cramfs.img, romfs-x.cramfs.img, u-boot.bin.img, web-x.cramfs.img, but with install.lua have a problem=( )

 

and who knows how make *.img files back from modified image (mounted and modifed image squashfs)?

 

it need for DAHUA DVR5416

Share this post


Link to post
Share on other sites

i have an dahua according to the seller is a IPC-HFW1100s. cant find much info on it and i want to know if theres an updated firmware for it that anyone can share?

this is all the info i have

IPC-HFW1100s - according to the seller

 

pulled its off the web interface

Software Version2.210.0000.3.R, build : 2013-12-28

WEB Version3.2.1.161283

 

thanks

Share this post


Link to post
Share on other sites

thanks a lot.

 

I´ve seen that there is a newer version than mine for the 2xxx V2 cameras

 

Downloaded and as soon as I try it, I send the feedback

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×