Axis Q7401 installation in Omnicast 4.8

[vinaya.svnt 0]

Hi all...

 

Recently i have added Axis Q7401 encoder with Legend IP PTZ camera to Omnicast 4.8.video is working but PTZ is not working.During adding of PTZ in Omnicast its not showing the serial ports in the option ...

 

 

Any Help..

 

 

Thanks and Regards,

 

Vinay

[vin2install 0]

Why are you using an IP camera with the encoder? Why didnt you use a regular analog PTZ instead.

[vinaya.svnt 0]

i am facing problem with PTZ movement when its connected directly with ip may be some hardware problem.

 

With encoder its working fine in web browser the only problem is its not working with Omnicast 4.8.in omnicast camera is added its showing the video, for PTZ controlling we need to create a PTZ unit for every device in which its not adding..

[ssmith10pn 0]

Omnicast and GE Legand IP PTZ work fine together.

I'm reaching out to one of my co workers and I'll get you some more info.

 

Do you have the Legand on Firmware 7.7?

[ssmith10pn 0]

PS,

I connected a Legand Dome to and Avigilon Encoder and used the 485 out of the encoder and configured the Dome on Pellco D 2600 (Position 9 on switch 1).

PTZ navigates fine but video quality out of the Legand BNC is awful!

[vinaya.svnt 0]

Thanks Smith,

 

the latest GE Legend dome Firmware is 3.77 which i already uploaded,but the problem is you have to create PTZ unit in omnicast in which you have to select serial port which is not displaying.

 

Please find the attachment.

 

Also i need help on this below link

 

http://www.cctvforum.com/viewtopic.php?f=19&t=35204

[ssmith10pn 0]

I will be on site tomorrow and the system is Omnicast with dozens of Legend IP domes with the only wires connected to them is a Cat 6 and power wire. I will get some screen shots for you.

[ssmith10pn 0]

With the Omnicast Config tool in Physical Mode (Not Logical) right click on the Archiver you want to add the Legend too.

Select Add unit

 

 

The ports need to match how you configured it in the Archiver.

 

Also in the Legend make sure make sure Sym Secure Legacy is not checked.

 

Screen shot is bad.