crow 0 Posted May 11, 2013 hi ive just got one of these dont know anything about matrix's all i have used before is a keyboard controller with digita display to set the board rate e.c.t connected with the rs485 twisted pair i have 2 pelco spectra 4's cameras to try out with the matrix and a keyboard joypad the matrix is a pelco cm6700 and the joypad is a kbd300a the keyboard is conected to the matrix in local keyboard socket and thats all thats connected at the moment how would i wire it up to test the 2 ptz camaras and the matrix / joypad and what would the dip switches need to be set to on the ptz's thanks for any help Share this post Link to post Share on other sites
crow 0 Posted May 11, 2013 got it all up and running in a fashion but cant run the pattern from the joypad any one know how to work these cant make the instructions out thanks Share this post Link to post Share on other sites
crow 0 Posted May 11, 2013 Got it working now It was set to std coaxitron ,when I changed it to extended coaxitron it worked on the patterns Dip switch 2 switches were all off apart from 5 and 7 Not sure why as I put them all to off and it works ok Any one know what they should be set to Cheers Share this post Link to post Share on other sites
