bonzep 0 Posted July 12, 2013 hey there, I have a 32 camera system that uses the sony cctv 580 lines resolution cameras with an adapter plug that goes to the dc plug in...unfortunately during install the adapter plug tore off when trying to put it between some metal supports....i have two red wires and a black wire...the incoming wires are red and black,im assuming they just got to red and black?can anyone give me some clarification if my thinking is right on this....im assuming one red powers the cameras the other powers the leds for night vision and the ground would be a common ground.....Do not wan to fry the camera, thanks Share this post Link to post Share on other sites
the toss 0 Posted July 12, 2013 Your assumption on the wiring is correct Share this post Link to post Share on other sites
