Jino 0 Posted September 5, 2013 Hi, I bought a Dahua IPC-HDB3200C four months ago and I have a problem with it : * I can ping the camera (192.168.1.108) * I can't access to the webadmin (http://192.168.1.108), I have a white page * the camera reboot each 2 minutes (red led, then green led, then red led, then green led, then red led, ...) * I have no image from the camera with my software (Blue Iris 3) * when I try to detect the camera with ConfigTool, the camera is not listed ! So I can do nothing with it... I can't update the firmware for example. * by reseting manually the camera, it solve nothing. * I tried with/without POE alimentation, same problem. I think it is a hardware problem, what do you think ? I tried different configurations/cables, nothing work. Thanks, Share this post Link to post Share on other sites
buellwinkle 0 Posted September 5, 2013 Sounds like it's done. Should be under warranty though. Share this post Link to post Share on other sites
Jino 0 Posted September 7, 2013 I repaired my cam I have to test it now ^^ I loggin to the cam with telnet and see that /usr/bin/sonia was not launched, and the message : [libdisk] WARN : before----------------[libdisk] Find 0 device [libdisk] WARN : before---------------- The camera didn't detect any video 'device' which is the problem. So I thought something could be unplugged. As we can turn the 'lens' on the right, left, top, bottom, I thought it could be the problem. So I disassembled the cam : http://www.image69.fr/img/0_2468 http://www.image69.fr/img/0_2469 http://www.image69.fr/img/0_2470 I unplugged/plugged the cable... and it works great Share this post Link to post Share on other sites
