Jump to content
mike_va

cs854 PTZ and Axis 241S question

Recommended Posts

I am new to PTZ, and could use some advice.

 

I've tried to reset it per the manual, and confirmed per the screen shot attached.

 

I can not get my 241S or 243 to control it, just pans left to right non stop.

 

Any advice appreciated. Hooked up with 4 feet of wire on the 485 to yellow/green (and ground), half duplex terminated.

174042070_Screenshot2014-01-2319_40_00.thumb.png.e686788195fd775a528e8e3ecb26b8cd.png

1770992745_Screenshot2014-01-2319_39_12.thumb.png.1aab4185c02dbf0fd71e9452549f573b.png

1694649852_Screenshot2014-01-2319_39_22.thumb.png.9915af315754c86c461dfeaff9a9c0a6.png

Share this post


Link to post
Share on other sites

I am new to PTZ, and could use some advice.

 

I've tried to reset it per the manual, and confirmed per the screen shot attached.

 

I can not get my 241S or 243 to control it, just pans left to right non stop.

 

Any advice appreciated. Hooked up with 4 feet of wire on the 485 to yellow/green (and ground), half duplex terminated.

For most ptz cameras you don't need a ground

The axis server should have the protocol set to "Panasonic" with an address of 1

Share this post


Link to post
Share on other sites

Thank you.

 

I recently got this working. It was an issue where the 485 had gotten cut under the taped up area. Once that was fixed worked very nicely.

 

Nice how you can pan etc by clicking on an area of the screen, zoom with the mouse wheel etc.

1004662838_Picture20.png.36f242fac5f63f1c9ff85e3cd63ef39e.png

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×