Jump to content
warmbells

Technicolor TG582n and Swann H.264 DVR Help please

Recommended Posts

Hi,

 

Has anybody had any experience of setting up these two items?

 

I am running Windows 7 and the MAC address of the DVR shows in the router network but nothing seems to be happening and it does not show up in the PC network.

 

The DVR network info is

 

Technicolor TG582n

 

IP Address 192.168.x.x

Subnet Mask 255.255.255.0

Default Gateway 192.168.1.x

Auto DNS

Prefered DNS Server 192.168.1.x

Alt DNS Server

MAC Address 00:0A:xx:63:xx:B0

 

Am on Plusnet Fibre

 

Just a bit puzzled.

 

Thanks,

Gerald

Share this post


Link to post
Share on other sites

Hi Gerald,

 

I've just finished setting up my Swann DVR on my Plusnet Fibre.

 

You can get the mac address to confirm you're working with the correct device from the networking panel.

 

Are you having trouble making the DVR available outside your network or just general issues?

 

If you have now resolved this please feel free to ignore my response.

 

To make the DVR accessible through the Technicolor router you need to add between 1 and 3 rules to you firewall to cover the port forwarding.

 

You need to go to:

Home > Toolbox > Game & Application Sharing

 

Create a new game or application rule

 

Name it: Swann DVR

 

Then set up the following rules as you require (Port 9000 - Media, 18004 - Mobile App, 85 - Web). Leave the trigger protocol set to "any" and the trigger port empty (would have saved myself a lot of time if I'd done that in the first place).

 

Protocol TCP

Port Range 9000

Translate To 9000

Trigger Protocol (Any)

Trigger Port (Leave Blank)

 

Protocol TCP

Port Range 18004

Translate To 18004

Trigger Protocol (Any)

Trigger Port (Leave Blank)

 

Protocol TCP

Port Range 85

Translate To 85

Trigger Protocol (Any)

Trigger Port (Leave Blank)

 

Once you've added those rules you need to assign them to your device.

 

So click on:

Assign a game or application to a local network device

 

From the list select "Swann DVR"

 

Next select from the list your corresponding MAC code from the DVR (usually proceeded by the word "Unkown").

 

Click "Add" and that should be it.

 

Mine works very nicely now.

 

I'm sure you've already changed the default password to something stronger.

 

Hope that helps you and anyone else who may be struggling with this issue.

Share this post


Link to post
Share on other sites

Hi dakrowe,

 

Thanks for your reply. I just can't get it to show anything in the network, I have the DVR pluged into the router and a MAC address shows up but nothing shows in the home network. I want to be able to transfer any videos stored on the drive to one of my PCs and to be able to monitor via my iPhone when not at home. I've ffollowed your instructions but still nothing showing in the network.

 

Gerald

Share this post


Link to post
Share on other sites

Ok,

 

If you've followed the instructions then we have set the rules for remote access via your iPhone and web.

 

Let's break the next steps down.

 

The SwannDVR system does not provide for a SMB/SAMBA share which is why the device does not appear on your Windows Network.

 

Presumably you do not have a Static IP address for your Internet connection (world facing) which is normally how you'd route through to your CCTV system over the net.

 

To get round this you can register a free Dynamic DNS account which will provide you with name resolution to your Dynamic IP address. There is an option to do this using the Swann DVR or you can use a service such as "NO-IP" which provides a free host address.

 

Using Internet Explorer you can access your CCTV box via its IP Address (for example: http://192.168.1.230:85).

 

Sometimes this does not show you the interface; if this is the case you need to make a couple of changes to your Internet Settings. Click on the "Cog", select "Internet Options", "Security", "Local Intranet", "Custom Level", under "ActiveX controls and Plug-ins" find "Download Unsigned ActiveX controls" and set it to "Prompt" (there's a video showing a similar setup here: 5SH_1XYurcY )

 

Once you've completed that after OKing everything and if the yellow bar appears allowing the component to be installed then you should be presented with the screen to login.

 

It should show "Swann" at the top and in a box, roughly centre screen "User Login"

 

Enter your username and password (the IP address will be set by the entry in your address bar and the media port will be 9000). If you're accessing this on your LAN set that option in place of the Internet one (it's just a drop list). LAN shows higher quality feeds.

 

You should now have the DVR working in your web browser on the local LAN.

 

To download a video you need to select "Playback" from the options at the top of the screen. You will then see the option to select the appropriate replay date/time/camera after which you can select the option to Download your file. For some reason you need to run Internet Explorer as Administrator to enable the download to complete.

 

The downloads should reside in a folder on your C: drive called "DVR"

 

There are various sub-folders within the directory that the web interface will download to.

 

You can create a DDNS account either on Swann's system (http://www.swann.com/us/dvr-ddns-portal) or the "No-IP" service (http://www.noip.com/).

 

If you create an account using the Swann System then you can enter the details in to the Remote Settings under the Network section followed by the DDNS. Enter the hostname, username and password you created during registration.

 

If you have registered with the NO-IP service you need to take the following steps.

 

Home > Toolbox > Dynamic DNS

 

Tick to enable

 

enter in your username, password, select the service to be "No-IP" and finally enter your hostname.

 

Applying this should then provide you with your DDNS URL.

 

for example: GeraldsDVR123.ddns.net or GeraldsDVR123.swanndvr.net

 

This is what you enter in to the "Server" section of the app on your iPhone.

 

The port will be 18004

 

Enter your Username and Password along with a meaningful name for the entry.

 

Hope this helps.

Share this post


Link to post
Share on other sites

Hi,

 

Sorry to be a pain, I don't seem to be able to get anything to work. I have done the settings for IE and have a SwannDNS and a No-IP account neither of which seems toget me anywhere. When I enter the IP address given by No-IP I end up in the router page. if I add the port 9000 I get nothing at all.

 

Would it be possible for me to PM you and give you some more specific details of what I have got in all the settings (don't want to give through the forum)/

 

Gerald

Share this post


Link to post
Share on other sites
Hi,

 

Sorry to be a pain, I don't seem to be able to get anything to work. I have done the settings for IE and have a SwannDNS and a No-IP account neither of which seems toget me anywhere. When I enter the IP address given by No-IP I end up in the router page. if I add the port 9000 I get nothing at all.

 

Would it be possible for me to PM you and give you some more specific details of what I have got in all the settings (don't want to give through the forum)/

 

Gerald

First get you dvr working locally before port forwarding and using no ip (that wont work right now anyways...you prefered dns network should be set to 8.8.8.8 which is googles dns otherwise nothing internet related will work...(remote viewing, email alerts etc)..

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×