3gadsol 0 Posted February 3, 2015 Hi everybody, anybody can help me that how can upload firmware via computer to dahua DVR1604HD because dvr have no display, and where can i get the more firmware of dahua Share this post Link to post Share on other sites
TechnicalTony 0 Posted February 10, 2015 Your best bet in this case would be dahua themselves. http://www.dahuasecurity.com Be really REALLY careful if you're updating firmware, the wrong firmware will kill the unit dead. I would consider it a last resort. Also I would bear in mind that a firmware update is highly unlikely to solve a display issue, it's more likely that either the monitor is out of the DVR's resolution range or theres a faulty display port or lead Share this post Link to post Share on other sites
3gadsol 0 Posted February 11, 2015 Hi TechnicalTony Thanks for reply but my dear when DVR firmware be corrupt then dvr do not power on, then should have to upload correct firmware it is my experience now i want to give you example, i am technician if any client bring dvr for this situation i change the software IC to the main mother board because i have Master program of 16CH Dahua DAH5116H. But it is not good process with Hardware i want software process, If you have any update kindly inform me. Share this post Link to post Share on other sites
