ashanta 0 Posted April 1, 2015 I have 6 Swann cameras set up with motion detection. They have grids to determine what specific area should be deactivated. Generally they have been fine. However, I have two cameras that are being activated by vehicles passing the house. The two cameras concerned are set up so that the area the road passes the house is completely gridded out. This means that the cameras should ignore any movement in the gridded area and therefore the vehicles shouldn't activate these cameras but they do. I have reset the areas but it has not resolved the issue. Would anyone have any ideas regarding this problem? Thanks Share this post Link to post Share on other sites
